Announcements
Despite the compact size, the S06 thermal protector is durable enough to withstand up to 25A and 600N pressure resistance to the switch housing. The round design makes for efficient used of space.
(read more)Thermik’s M4 screw on housing is available in the L01/LK1 (NC) and L02 (NO) thermal protectors. The housing allows attachment into switch cupboards, on heat sinks or on motor casings, and more.
(read more)Thermik’s patented twin disc design permits the temperature “calibration” to be built into the switch rather than the traditional adjustment methods used at the end of the production line.
(read more)The XH series from Thermik is a hybrid thermal protector consisting of the series H6 in combination with a parallel connected 3 quadrants Triac that is placed in an epoxy-cylinder. The SXH (with insulation) and the CXH (without insulation) are specially designed for the requirements of higher standard electric motors where a high short-circuit current appears.
(read more)Thermal protectors in type P1 are based on the well proven mechanism of Thermik’s product series 01. The bimetallic disc will reset to close the contact only after switching off the operating voltage and a relative short cooling phase.
(read more)THERMIK'S S09 and C09 thermal protectors are utilised to start fans, warning lamps or acoustic signals in case of overheating. They can either be attached on or embedded within coil windings. Due to their small dimensions, they will fit almost anywhere.
(read more)Similar to the P06 THERMIK thermal protector, the H06 features a ceramic deck-plate as a contact carrying part. The housing allows fastening to the object to be protected by a screw, such as heat sinks, housings, and pipes. The flexible lead wires of the H06 allow universal connection to remote circuits.
(read more)THERMIK'S thermal protectors RH are based on the well proven mechanism of our product series H6. A thick-film heating resistor RH, parallel to the contacts, effects an electrically operated self locking mechanism.
(read more)THERMIK XO Series Thermal Protectors are designed to handle your High Current Applications – up to 75Amps@250VAC, and 100Amps@12VDC. The XO Series offers the CXO thermal protector without insulation and the SXO thermal protector with Mylar-Nomex insulation. The small dimension size in relation to the maximum current load they can be either attached or embedded within coil windings.
(read more)THERMIK's V06 thermal protector is double-insulated in the attachment housing, normally closed, with automatic reset, and connector cables. The V06 has a nominal switching temperature range of 70 °C - 180 °C and an installation height from 10mm.
(read more)The CZ1 thermal protector from THERMIK features a defined response time of <20 s due to series resistor RS and nominal switching temperature of 70°C - 160°C.
(read more)THERMIK's thermal protectors in series P06 features a ceramic deck-plate as contact-carrying part, excellent long term performance, very short bounce time, and instantaneous switching. The P06 has a nominal switching temperature range of 70 °C - 200 °C.
(read more)THERMIK thermal protectors of Series 01 and 02 are utilized for overheating protection of all kinds of electrical equipment or devices. They are most suitable for electrical motors where automatic resetting is required after overheating and subsequent cooling of the motor. The Series 01 is Normally Closed (NC), while the Series 02 is Normally Open (NO).
(read more)As one of the few manufacturers of PTC ceramics, THERMIK brings much experience. Basic technology is greatly significant in manufacturing, and our thermistors and PTC motor protection sensors are of much higher quality than standard products.
(read more)With more than 3 million THERMIK products in use globally, people rely on THERMIK for unique solutions and greater safety. THERMIK focuses on three things: innovation, customization, and partnership.
(read more)THERMIK'S CP1-Pin has a very compact and flat design. The CP1-Pin has a self regulating PTC- heating resistor enables rated switching temperatures up to 180 °C, due to a very small overshooting of the temperature effected by RH. Nominal switching temperature of 70 °C - 180 °C.
(read more)THERMIK'S CH5 series utilizes a bimetallic disc with an additional spring disc to achieve superior thermal switching performance. This CH5 thermal protector has a power class of 25A to 75A, an insullation height from 5.0mm, and nominal switching temperature from 80 ° C - 180 ° C.
(read more)THERMIK thermistors are used for temperature monitoring. They are optimally designed for direct installation in the windings of electric motors and transformers. In their respective housings, THERMIK thermistors prevent overheating of devices, such as electronic assemblies, heat sinks, etc.
(read more)THERMIK'S UM1 thermal protector features a flat design to fit closely built-up circuits, quick response sensitivity, excellent long term performance, instantaneous switching, very short bouncing times, and temperature resistance. The UM1 has a nominal switching temperature of 70 °C - 180 °C.
(read more)THERMIK strives to deliver a customized solution that provides reliability, safety, and durability. This complimentary white paper from THERMIK Corporation is a creative and reliable reference that addresses the correct way to approach the process of building or improving thermal protection for your design.
(read more)THERMIK thermistors are used to monitor temperature and to prevent the overheating of OEM equipment and devices. All components include color coded lead wires and OEM leading.
(read more)THERMIK'S SH5 series utilizes a bimetallic disc with an additional spring disc to achieve superior thermal switching performance - precise switch-point accuracy, longer service life, and no premature switching. The SH5 has a power class of 25A to 75A, an installation height from 5.5mm, nominal switching temperature from 80 °C - 180 °C, with maximum ratings up to 60 amps and...
(read more)All across the globe, THERMIK has partnered with manufacturers in the medical industry to better improve medical equipment such as MRI's and many other expensive diagnostics equipment.
(read more)THERMIK thermistors are used for temperature monitoring. They are optimally designed for direct installation in the windings of electric motors and transformers. In their respective housings, THERMIK thermistors prevent the overheating in devices such as electronic assemblies, heat sinks, etc.
(read more)THERMIK offers some of the highest thermal protection switches on the market today. The HT Series features the C01HT, S01HT, S06HT, and C06HT. With nominal switching temperature of 205 °C - 250 °C, THERMIK's HT Series will be especially effective for Class C Insulated Transformers.
(read more)THERMIK thermistors are used to monitor temperature. They are optimally designed for direct installation in the windings of electric motors and transformers. In their respective housings, Thermik thermistors can prevent the overheating of devices such as electronic assemblies, heat sinks, etc.
(read more)THERMIK Thermal Protectors are specifically engineered to safeguard transformers and motors. Our thermal protectors have a wide-range of temperature sensing from 60°C to 250°C, voltage ratings up to 600VAC & 60VDC, and switching current capacity to 60 Amps. THERMIK can handle any of your application requirements!
(read more)The series F1 thermal protector, from THERMIk, is fixed in a positive lock and is self-aligning between the floor of a conductive housing and a contact cap which is made of steel and insulated from it, and which closes the housing like a button cell.
(read more)Engineered to safeguard transformers, the current sensitive thermal protector type SZ1 with normally closed contacts is utilized for overheating protection of all electric equipment or devices, according to EN 60 742. The type SZ1 is sensitive for temperature as well as for currents.
(read more)Thermik Corporation manufactures customized solutions for thermal protection to match your specifications.
(read more)The N01/NK1 thermal protectors are designed to be installed directly into printed circuit boards to prevent overheating. The connections pins can either be vertical or horizontal to best suit your application.
(read more)THERMIK thermal protector in series C05 has a power class of 4 A to 25 A, insulation height from 5.0mm, and nominal switching temperature of 50 °C - 200 °C. The C05 utilizes the bimetallic disc along with an additional spring to achieve superior thermal switching performance.
(read more)THERMIK Thermal Protectors of series Q5 - types SQ5 and CQ5 with normally closed contacts are utilized for overheating protection of all kinds of electric equipment or devices, especially for electric motors, transformers and ballast. They can either be attached on or embedded within coil windings. Due to their small dimensions, they will fit almost anywhere.
(read more)In answer to the industries' demand for higher temperature thermal protection, THERMIK has developed a new thermal protector for up to 250°C developed with the same reliability you've come to expect.
(read more)Looking for the perfect thermal protection for your high efficiency motors? Plagued by nuisance tripping or worse?
THERMIK is the leading manufacturer of customized specific solutions. Our experience and competence guarantee that we can provide the proper solution for every application need.
(read more)