Glass coating for producing hermetic seals

Aremco offers an expansive range of ceramic-based materials used for the assembly of high temperature, high power electrical devices, and high temperature fixtures, molds and tooling. These materials, based on aluminum oxide, aluminum nitride, magnesium oxide, silicon dioxide, silicon carbide, zirconium oxide, and zirconium silicate, offer unique properties with respect to operating temperature, thermal conductivity, dielectric and mechanical strength.

Hi-temp, prevents dusting of fibrous insulation materials

Exceptional electrical, moisture & chemical resistance

Glass coating for producing hermetic seals

High dielectric, use in apps to 2600 °F, moisture & acid resistant

High fired strength, dense ceramics

Ceramabond 503-VFG-C

Good adhesion to metals, low cte metals

Sets @ RT, good filler, probes, sensors

Bonds plated metals to ceramic, heaters, ignitors, gasketing

Induction coils

Aremco’s high temperature ceramic adhesives are unique inorganic formulations for bonding and sealing ceramics, metals, quartz, graphites, textiles, and composite materials used in design, process and maintenance applications to 3200 °F. These advanced materials, which exhibit high thermal and electrical resistance, enable engineers to solve problems that were previously impossible using conventional epoxies and other organic-based products.

High adhesive strength, textiles, threadlocking

Dielectric, high strength, heaters, sensors

High strength, good filler, halogen lamps

Low cte, good strength, tubes, vessels, sensors

Tundish nozzles, 835MB model is good for ceramics to quartz bonding

Bonds and coats zirconia, high strength, zirconia, SOFC's

Dielectric, moisture resistant, thermocouples

Aremco’s high temperature ceramic adhesives are unique inorganic formulations for bonding and sealing ceramics, metals, quartz, graphites, textiles, and composite materials used in design, process and maintenance applications to 3200 °F. These advanced materials, which exhibit high thermal and electrical resistance, enable engineers to solve problems that were previously impossible using conventional epoxies and other organic-based products.

Halogen lamps, max temp is 1560 °F in an oxidizing atmosphere

Aremco offers an impressive selection of high performance epoxies for specialty bonding and potting applications to 600 °F. These products can be applied to a myriad of substrates, offering exceptional chemical, electrical and mechanical properties.

Ceramic fiber-reinforced, refractory repair

Sets @ RT, good filler, oxygen sensors

Aremco offers an expansive range of ceramic-based materials used for the assembly of high temperature, high power electrical devices, and high temperature fixtures, molds and tooling. These materials, based on aluminum oxide, aluminum nitride, magnesium oxide, silicon dioxide, silicon carbide, zirconium oxide, and zirconium silicate, offer unique properties with respect to operating temperature, thermal conductivity, dielectric and mechanical strength.
Ceramacast™ products are supplied as one- or two-part systems. One-part systems are mixed with water or a specialty binder used to improve moisture resistance. Two-part systems consist of a powder and liquid binder system. Materials set at room temperature in several hours, then cured at ~250 °F in 2-4 hours.

Sil-Bond™, a silicone-ceramic potting compound for optimal moisture resistance, is now offered along with EZ-Cast™ for producing silicone rubber molds.

Ceramacast™ products are supplied as one- or two-part systems. One-part systems are mixed with water or a specialty binder used to improve moisture resistance. Two-part systems consist of a powder and liquid binder system. Materials set at room temperature in several hours, then cured at ~250 °F in 2-4 hours.

Ceramic fiber-reinforced