UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. UV 60-7170 is water clear and is designed to be used as an adhesive, coating, or encapsulant. This system is moisture and chemical resistant.
UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. This is advantageous when potting or joining substrates with shadow areas. UV Cure 60-7170 may also be heat cured as a secondary cure operation.
UV Cure 60-7170 is not affected by oxygen and will not have a sticky or greasy surface. The surface is rigid, smooth, and glossy when properly cured. UV Cure 7170 bonds to metal, plastic, paper and ceramic.

10-3022 is a two component epoxy adhesive and sealant. This structural adhesive has excellent chemical and heat resistance. 10-3022 is widely used as a stencil and screen adhesive due to its bonding strength and toughness. It has been used extensively to bond polyester mesh to aluminum frames and for the bonding of stainless steel foil to polyester mesh.

10-3032R is a high bond strength epoxy adhesive and sealant. This system has a non-critical mix ratio and adjustable flexibility. 10-3032R is also safe to use due to the absence of harmful solvents and toxic chemicals in the formulation.

10-3044 is a two component epoxy adhesive and sealant. This structural adhesive has excellent chemical and heat resistance. 10-3044 is widely used as a stencil and screen adhesive due to its bonding strength and toughness. It has been used extensively to bond polyester mesh to aluminum frames and for the bonding of stainless steel foil to polyester mesh.

UV 60-7016 is a high performance Ultraviolet Curable Adhesive, Sealant, and Potting Compound. This new one component urethane acrylate system was specifically designed for the difficult bonding of glass to metal. UV 60-7016 has outstanding thermal shock and impact resistance, and is an excellent adhesive for substrates of differing coefficients of expansion. It offers exceptional elongation, clarity, and excellent heat resistance.

UV Cure 60-7100 is a water clear and non-yellowing adhesive. This adhesive is formulated to provide high elongation and adhesion to a variety of substrates. UV Cure 60-7100 is an ideal adhesive choice when impact resistance and/or clarity is important. It will cure on demand within seconds when exposed to high intensity ultraviolet light. UV Cure 7100 can also be used as a sealant.

20-2100 FR is a two component, room temperature curing, low viscosity polyurethane system for potting, casting, encapsulating and sealing electronic components and assemblies. 20-2100 FR is a flame retardant self extinguishing system. It meets the stringent requirements of UL 94-VO. Designed for ease in use, this system does not contain any MOCA or TDI and is therefore safer to use and less toxic than most urethane systems.

10-3213 is a new two part epoxy adhesive system which exhibits high bond strength and outstanding thermal shock resistance. The 10-3213 has proven to be an excellent quick set patch and repair adhesive with excellent sealant capabilities.

Epoxies, Etc's resins are used to protect, insulate, and conceal circuitry, components, and devices. These formulations were designed to satisfy the requirements of many demanding potting, encapsulating, and casting applications in the electronic, electrical, automotive, and aerospace industries.

10-3508 is a steel filled repair and filling epoxy compound. This non-sag formulation will not drip on vertical surfaces and provides outstanding adhesion to metals, wood, concrete, glass and plastics.

UV Cure 60-7105 is a low viscosity urethane adhesive, coating and potting compound. This UV curable resin exhibits outstanding adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. This material is a good choice for deep section curing.

UV Cure 60-7158 is a UV Curable Epoxy Adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotropic and will not run once applied to the substrate.
UV Cure 60-7158 does not contain any solvents, has little shrinkage and provides a smooth non-sticky surface.

UV 60-7160 is a one component, UV light curable, clear coating. 60-7160 is water clear and exhibits superior yellowing resistance. This product has been formulated to cure instantly when exposed to high intensity ultraviolet light. 60-7160 has excellent adhesion to a variety of substrates and is therefore a suitable as an adhesive and coating candidate, or may be used in small potting applications.

10-3507 is a two component, solvent free, underwater curing epoxy system. This system was formulated for applications requiring high adhesion to wet, cold or underwater surfaces. Kevlar has been added to the 10-3507 formulation for added strength and abrasion resistance.

20-2162 is a unique high performance two component urethane system. The 20-2162 is engineered for demanding applications where flow control is necessary to limit mold leaking, seeping around cable entries and substrate wicking. This product offers outstanding durability and adhesion to a variety of substrates.
FEATURES:
*Outstanding environmental performance
*Controlled flow
*Easy mixing
*High impact resistance
*Available in Triggerbond® cartridges

20-2182 is a unique high performance two component urethane system. The 20-2182 is engineered for demanding applications where flow control is necessary to limit mold leaking, seeping around cable entries and substrate wicking. This product offers outstanding durability and adhesion to a variety of substrates.
FEATURES:
*Outstanding environmental performance
*Controlled flow
*Easy mixing
*High impact resistance
*Available in Triggerbond® cartridges