1SM 1″ Belt Sander

• 1/3 HP motor
• 1 PH, 1725 RPM
• 1″ x 42″ belt
• 4″ contact wheel
• Tilt table – vertical sander only
• 1800 SFPM
• 32 lbs
• Model 1SMV – same as above plus:
• Enclosed guard
• Optional CV-4 vacuum base, 1SMV
• 95 lbs
• Model: 1SM
• Model: 1SMV- As above with enclosed belt guard and vacuum base

S10D 10″ belt sander
Good for large surfaces, Available in Horizontal and WET also !!

• 10″x90″ belt, 3400 SFPM
• 10HP, 3phase, TEFC motor. Magnetic controls with jog switch.
• Steel platen-10″x29″
• Work Surface-10″x28″
• Cast Iron Table-14″x18″
• Table Tilt 45 deg. down, 15 deg. up
• Air Tension on Belt, 0 55 PSI Reqd.
• 24 volts @ switch, 10 gal tank & coolant pump.
• 1160 lbs.
• Dimensions: L39″ x W28″ x H70“
• Model: S10D: 10″ x90″ DRY vertical belt, 10 hp, 3 phase, 220/440/60Hz
• Model: S10W: WET vertical 10″x90″ belt, 10 hp, 3 ph, 24 volt@ switch
• 220/440 volt 60 hz., with 10 gal tank & coolant pump.
• Model: S10HD: Horizontal DRY, 10″x90″, 10 hp, 220/440/60Hz
• Model: S10HW: Horizontal WET, 10″x90″,10 hp, 220/440/60Hz
• Available in 50 hz,575 volt!

S14D 14″ Vertical Dry Belt Sander
Also available Wet !

• 14″ x 103″ belt
• 24 volt at switch, 10 gal coolant tank & pump.
• 20 hp, 3 phase, 220/440/60hz
• Steel platen 14-1/2 x 36″
• Work surface 14″ x 32″
• Tilt worktable 14″ x 18″
• Mag controls with jog
• Air belt tensioning, 0-55 PSI reqd.
• 3400 SFPM
• Dimensions: L 46″ x W 31″ x H 84″
• 1750 lbs
• Model: S14D, Vertical DRY, 20 hp, 3phase,220/440/60hz
• Model: S14W, Vertical WET, 20 hp, 3 ph. 220/440/60hz

1SK6 1″Combination Sander, 6″ Grinding Wheel
Two machines in one !!

• 1/3 HP, 110 volt, 60 hz, with 6″ grinding wheel and 1″ x 42″ abrasive belt
• 3450 RPM
• Tilt table and 5″ contact wheel.
• Weight: 32 lbs.
• Model # 1SK6

2FSM 2″ Sander

Multi-position vertical or horizontal!

• 2″ x 48″ belt, Vertical or Horizontal Position.
• 1/2 HP motor, 3450 RPM, direct drive, 5″ contact wheel
• Tilt work table, removeable platen
• Full hinged OSHA guard for quick belt change.
• Pre-set belt tension, one knob belt tracking.
• 4500 SFPM belt speed, WT. 48 lbs.
• Model: 2FSM
• Model:2FSMV: As above with DCV-4 vacuum base.

2FSMV 2″ Belt Sander

• 1/2 HP motor
• 1ph, 3450 RPM
• 2″x48″ belt, contact wheel, tilt table and removable platen
• Full hinged osha guard for quick belt change
• Mounted on DCV-4 dust collector 100 CFM.
• Wt: 120 lbs
• Dimensions: L12″x W14″x H56″
• Model: 2FSMV

DS10-2M 2″ Combination Sander,10″ Disc

• 10″ Disc sander with 2″ x 48″ belt combination.
• Multi-postion belt, work table.
• 1/2 HP, 1 PH 110 volt, TEFC motor
• 76 lbs. Made in USA!!
• Dimensions: shipping box dims 17″ x30″ x 19″
• Model: DS10-2M

2FS 2″ Belt Sander

• Less motor, use your motor , 1/2 hp , 1725-3450 will do the job!
• Vertical thru horizontal postitions. 2″ x 48″ belt
• Tilt Work table
• 5″ contact wheel
• Removable platen
• pre-set spring belt tension
• one knob belt tracking
• Includes V belt pulley and V belt
• bolt to your table, locate motor Behind unit, underneath , connect V belt to motor and you’re ready
• 24 lbs
• Model: 2FS

2FS72/2FS72M Belt Sander

GREAT for knife making!

• Less Motor, Multi-position.
• Put your spare motors to work. Any 1/2 HP to 1 HP 3450, rpm motor will work.
• V belt drive.
• Mount to your bench, fixture
• One knob tracking, sanding belt is spring tensioned .
• Similar to the 2FS only 2″ x 72″ belt and 8″ serrated contact wheel.
• 24 lbs
• Model: 2FS72
• Model: 2FS72M with 1/2 HP , 110 volt motor and base.
• Wt: 70 lbs.

2SK2 Combination Sander

Double Head Sanding Belts

• Two 2″ x 48″ abrasive belts on a 1/2 HP grinder!
• Rough & finish at the same time!
• 5″ contact wheels on bottom for easy access. OSHA guard.
• Easy one knob belt tracking. Made in USA !!
• Model: # 2SK2
• Weight: 60 lbs.

S460D 4″ Belt Sander

• 4″ x 60″ abrasive belt, direct drive, vertical position
• Reversible platen 4″ x 17″, work table 4″ x 6″
• Full OSHA guard, easy belt tracking, quick belt change, pre-set belt tension.
• Dimensions: L14″ x W16″ x H33″
• Manual switch, Wt. 290. lbs.
• Model S460D- 1 hp, 1 phase or 3 phase ( please specify voltage & phase)

DS10-4S 4″Combination Sander, 10″ Disc

• 10″ disc sander with 4″ x 36″ belt sander.
• With full boxed OSHA guard, Horizontal or vertical belt position.
• 1/2 HP 1PH TEFC motor , 110 volts, 1 phase.
• 90 lbs.
• Optional: Without OSHA guard on 4″ sander, model DS10-4
• Models: DS10-4S WITH OSHA guard
• DS10-4 Without OSHA guard.

S460W 4″ Wet belt sander

• 4″ x60″ belt, 3 hp 1 phase or 3 phase motor, Magnetic 24 volt switch.
• Heavy stand, pre set belt tension, one lever belt change
• Spindle RPM – 2800
• Flood coolant – 10 gal tank, 1/3 hp pump, splash guards.
• Platen – 4″ x 17″, work table 4″ x 6″
• Dimensions: L 36″ x W 24″ x H 63″ , Wt: 485 lbs.
• Model: S460W

Horizontal available:
Model: S460HW

S6MV 6″ Belt Sander, Vacuum Base

• Multi-position, vertical thru horizontal ! 3 HP! Powerful !
• Belt sander with heavy-duty enclosed stand and vacuum dust collector.
• 6″ x 48″ belt ( same as S6MS). DCV-6 dust collector base, 400 cfm, panel fiter.
• Quick one lever abrasive belt changing!
• Reversible steel platen , 6″ x14″,cast iron frame
• Dimensions: L 27″ x W 18″ x H 52″ Weight: 400 lbs.
• Model: S6MV-1, 3 hp , 1phase w/ vacuum
• Model: S6MV-3 , 3 hp , 3 phase w/ vacuum

Also Available:
Model S660MV 6″ x 60″ belt, other features same as above

S8D 8″ Vertical Dry Belt Sander

• 7-1/2HP, 3PH motor
• Magnetic switch w/jog button, air belt tension 40-50 psi reqd.
• 1725 RPM 3500 SFPM
• 8″x60″ belt, replaceable platen, work area 8″ x13″
• 8″x12″ cast iron table, adjustable angle, 5/8″ slot for mitre gage.
• 24 volt@ pushbutton. 220/440 3 phase, also available in 575 volt, 50 hz, CE rating
• Also available WET
• Dimensions: L25″xW25″xH62″
• 645 lbs.
• Model # S8D , 8″ x60″ Dry vertical belt sander, 220/440 3 phase
• Model: # S8W, 8″ x 60″ Wet vertical belt sander. 760 lbs.

S8 8″ belt sander HEAD

Mount this unit into your machine!

• 8″ x 60″ belt sander , Head only. Belt drive ( pulley included). Air tension on belt.
• 8″ dia. drive pulley, plate base with mounting, 8″ x 13″ reversible platen
• Model: S8, 8″ x 60″ sanding head only, less motor and electrics.

S4SV 4″ Belt Sander,Vacuum Base

• 4″ x 36″ belt sander with dust collector, cord, and switch
• Vertical or Horizontal position.
• 1/2 HP,1 phase 110 volt (1 HP available) 3450 RPM
• 3615 SFPM, 120 LBS.
• Dimensions: 50″ high x 12″ deep x 14″ wide
• Model: S4SV 1/2 hp
• Model: S4SV-1 1 hp

S612, S612V Combination Sander, Vacuum Base

Powerful! 3 hp! This is an industrial unit for production!

• Available with OR without dust collector. 3HP 1PH 220 OR 3HP 3PH 220/440 volt.
• Manual switch with overload protection.
• Built in 100 CFM dust colletor base with cartridge filter.
• Quick change belt, pre-tensioned one lever belt change…FAST !!
• Dimensions: L12″ x W14″ x H60″, Weight: 500 lbs.

Models:

• # S612-1 No vacuum, 1 phase/220 volt
• # S612-3 No vacuum, 3 phase 220 or 440 volt
• # S612V-1 Vacuum base, 1 phase/220 volt
• # S612V-3 Vacuum base, 3 phase 220 /440 volt

Specifications:

• Made in USA !!!
• Belt Sander multi-position horizontal/vertical
• Work Table- Cast iron 6″ x 10″ with 1/2″ x 1/8″ slot
• Platen- Steel 6-1/2″ x 14″
• Belt- 6″ x 48″ – 2800 SFPM
• Disc- 12″ aluminum disc, 5/8″ arbor Speed- 2500 RPM
• Work table- Cast Iron 8″ x 14″

2SK7 2″Combination Sander, 7″ Grinding Wheel

• Two machines in one.
• 7″ bench grinder (1/2 HP 110V) with a 2″x48″ belt sander.
• Use sander in multiple positions. Head rotates to optimum position.
• Has tilt table,contact wheel, removable platen. 5″ contact wheel.
• 3450RPM. 110 volt, 1 phase. Wt: 50 lbs.
• Model: 2SK7

DS10 10″ Disc Sander

• Heavy-duty, all steel
• Tilt table, 45 degrees down – 15 degrees up
• Optional: MG10 mitre gauge
• 10″ aluminum disc
• 5/8″ arbor
• 6″ x 11″ table
• 1/2 HP (110/220V), 1 PH TEFC motor
• 48 lbs.
• Model: DS10

DS12 12″ Disc Sander

• Heavy-duty, all steel
• Tilt table
• Optional: MG12 mitre gauge
• 12″ aluminum disc
• 5/8″ arbor
• 8″ x 14″ table
• 1 HP (110/220V) 1 PH TEFC motor
• 85 lbs.
• Model: DS12

DS20 20″ Disc Sander

• 2 HP , 3 PH, (220/440V)
• 20″ dia. steel disc
• 1-1/2 HP, 1 PH (110/220V)
• Reversing drum switch
• 1740 RPM
• Tilt table with mitre gage
• 528 lbs.
• Model: DS20

DS24H 24″ Diameter Horizontal Disc Sander

Other Diameters available, wet or dry! Please inquire for special sizes!

• 2 hp. , 1ph or 3 ph., 24″ diameter disc holder
• manual switch
• Great for flatening of parts!
• WT: 250 lbs.
• Model: DS24H

DS10V 10″ Disc Sander, Vacuum Base

• 10″ diameter disc sander complete with enclosed stand and vacuum dust collector. 100 CFM vacuum base. Paper & cloth filter bags.
• 1/2 HP, 1 PH 110V TEFC motor.
• 110 lbs. Dims: L12″ x W14″ x H46″
• Model: DS10V
• Filter bags, 5 pack paper # 22211, cloth bag # 5X878

DS12V 12″ Disc Sander, Vacuum Base

• Complete with enclosed stand and 100 CFM vacuum dust collector.
• 1 HP, 1 PH 110V, Dims: L12″ x W14″ x H46″
• Paper filter bags # 22211, cloth bag # 5X878
• Wt:150 lbs.
• Model: DS12V
• Made in USA !!

S8HD 8″ Horizontal Dry Belt Sander

• 8″ x 60″ belt, air tension, 0-50 PSI reqd.
• 7-1/2 HP, 3 PH motor, 220/440/575 , also 50HZ, CE
• Twin V-belt drive
• Replaceable platen
• Cast iron table 8″ x 12″
• Platen working surface 8″ x 13″
• Dimensions: L 35″ x W 24″ x H 34″, Weight: 900 lbs.
• MODEL: S8HD , horizontal DRY sander
• MODEL: S8HW, horizontal WET sander
• Model: S8HD, 8″ x 60″ Horizontal Dry, 220/440 3 phase 60 hz.
• Model: S8HW, 8″ x 60″ Horizontal WET. 220/440 3 ph, 24 volt@ pushbutton with 10 gal. tank & pump.

S8HW 8″ Horizontal Wet Belt Sander

• 8″ x 60″ belt, air tension, 0-50 PSI reqd.
• 7-1/2 HP, 3 PH motor, 220/440/575 , also 50HZ, CE
• Twin V-belt drive
• Replaceable platen
• Cast iron table 8″ x 12″
• Platen working surface 8″ x 13″
• Dimensions: L 35″ x W 24″ x H 34″, Weight: 900 lbs.
• MODEL: S8HD , horizontal DRY sander
• MODEL: S8HW, horizontal WET sander
• Model: S8HD, 8″ x 60″ Horizontal Dry, 220/440 3 phase 60 hz.
• Model: S8HW, 8″ x 60″ Horizontal WET. 220/440 3 ph, 24 volt@ pushbutton with 10 gal. tank & pump.

S660MW 6″ Horizontal/Vertical Wet Belt Sander
17″ long platen for long work.

• 3 HP, 1 PH or 3 PH, 3450 RPM
• 6″ x 60″ wet belt sander, vertical/ horizontal
• Steel platen – 6-1/2″ x 17″, 2800 SFPM
• Cast iron table with 1/2″ x 1/8″ slot, cast iron frame, Heavy duty base.
• Quick belt release, Full safety guard.
• Constant spring belt tension, FAST 1 lever belt change !!
• Magnetic switch, 24 volts at control
• Coolant pump and tank, 10 gal. 1/3 HP
• Weight: 500 lbs.
• Dimensions: 24″ x 36″
• Model: S660MW-1 1 Phase 220 volt
• Model: S660MW-3 3 Phase 220/440 volt

S14HW 14″ Wet Horizontal Belt Sander

Also available DRY ! Great for getting parts FLAT !!

• 14″ x 103″ belt
• 3400 SFPM
• Steel platen 14-1/2″ x 36″
• Work surface 14″ x 32″
• Air tension on belt, 0-55 PSI reqd.
• 20 HP, 3 PH TEFC
• Mag controls with jog, 24 volts at pushbutton
• L 64″ x W 31″ x H 35″
• Wt: 1900 lbs
• Model: S14HW, 14″x 103″, 20 hp.,220/440/60hz 3 ph. 24 volt at switch.
• 10 gal. coolant tank & pump.
• Model: S14HD, as above, less coolant tank & pump.

S4 4″ Belt Sander

• All-purpose- for wood, metal and plastics
• 1/2 HP (1 HP available) 1 phase /110/220/60hz.
• Vertical or Horizontal position, 4″ x6″ cast iron platen
• 3450 RPM
• 4″ x 36″ belt
• pre-set spring belt tension
• Dimensions: W18″ x H17″ x D 7″
• 46 lbs
• Model S4

S460V 4″ Belt Sander, Vacuum Base

• 4″ x 60″ belt
• 1 HP, 1 PH, or 3 PH
• 4″ pulley, 3450 RPM, 3600 SFPM, Direct drive
• Reversible platen 4″ x 17″
• Cast iron table 4″ x 6″
• Full OSHA guard, Easy tracking , Quick belt change !
• DCV-6 Vacuum base 400 CFM
• Dimensions: L 18″ x W 26″ x H 60″, WT. 485 lbs.
• Manual switch – please specify phase and voltage
• Model: S460V

Horizontal model available :
Model: S460HV

S4S 4″ Belt Sander

• All-purpose- for wood, metal and plastics.
• 1/2 HP , 1 phase. (1 HP available, #S4S-1).
• Vertical or horizontal position.
• 3450 RPM motor, 3600 SFPM.
• 4″ x 36″ belt with full OSHA guard
• Preset spring belt tension.
• Dimensions: W18″ x H17″ x D 7″
• 50 lbs.
• Model: S4S
• Model:S4S-1 hp

S6MS 6″ belt sander

Also available in 6″ x 60″ belt, wet or dry. See S660M , S660MS, S660MW

Industry standard. 3 HP !! Real workhorse !! Every shop needs one !! Also available in 5 HP and in 6″ x 60″ belt!

• 6″ x 48″ belt, variable position, direct drive, 1 lever quick belt release !!!
• Cast iron frame, Full OSHA safety guard, Heavy duty steel stand.
• 3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM
• Reversible platen 6 1/2″ x 14″ (S6M), 6 1/2″ x 19 1/2″ ( S660M)
• Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot
• Option: JIC controls
• Dimensions: L22″ x W14″ x H56″
• Wt: 230 lbs
• Model: S6 sander head only, less motor
• Model: S6M-1 3hp, 1 phase, 220, LESS stand.
• Model: S6M-3 sander, 3 hp, 3 phase, LESS stand
• Model: S6MS-1 , 3 hp, 1 phase, 220 volt, w/Stand ( 110 volts @34amps)Model: S6MS-3, 3 hp, 3 phase, 220/440 volt, w/Stand, Wt: 230 lbs.
• Model: S6MS-5 ,5 HP, 3 PH other features same as above.
• Model: S660MS 6″ x 60″, 3 hp, other features same as above, platen 6 1/2″ x 19 1/2″

S6MW 6″ Wet Belt Sander

• 6″ x 48″ Wet belt sander, 3 hp, 1 ph/220 or 3 ph/220/440 motor, Also available in 50 hz, 575 volt too!
• Magnetic switch with 24 volt at pushbutton.
• 3450 rpm motor w/ 2800 SFPM at belt.
• Steel reverseable platen 6 1/2″ x 14″
• Multi-postion vertical thru horizontal, cast iron frame.
• Cast Iron work table, 6″ x 10″ w/1/2″ x 1/8″ slot
• 1 lever quick belt change, pre-set spring belt tension.
• Full OSHA guard, heavy duty base
• 1/3 hp coolant pump & 10 gal. tank w/ baffles.
• Model: S6MW-1, 3 hp , 1phase, 220 volt. WT: 475 lbs.
• Model: S6MW-3, 3 hp , 3 phase, 220 or 440 volt Wt: 475 lbs.

S4SWB 4″Wet Metallurgical Belt Sander

• 4″ x 36″ wet benchtop belt sander
• 4″ wide x 6″ long platen/work area
• 1/2 hp, 110 vac, TEFC motor
• self contained coolant tank & pump
• Quick belt change, Pre-set belt tension
• Dimensions: L20″ x W 20″ x H 12″
• Model: S4SWB (top pic)
• Also available with 8″ Disc & belt combo:
• Model: S4SWBD WT: 130 lbs. (bottom pic)