These state-of-the-art panel meters are designed for accurate measurement of the AC RMS voltage, AC RMS current, frequency, active power and power factor in single-phase systems.

Although they are mainly used in electrical panels, these devices can also be integrated in many other applications.

The current transformer ratio can be set between 5/5A and 5000/5A via front panel buttons.

Devices have separate inputs for supply and measurement.

The unit allows both manual selection of the display channel and automatic scrolling.

The DM-0301 is part of a multi-dimensional family of digital panel meters designed for single-phase and 3-phase systems. These include Mains measurement analyzers, power meters, AC ammeters, voltmeters and frequency meters, as well as a combination voltmeter/frequency meter.

Features:

• True RMS measurements
• AC RMS voltage, AC RMS current, frequency, active power and power factor in single-phase systems
• Adjustable current transformer ratio
• Separate inputs for supply and measurement
• 72mm x 72mm or 96mm x 48mm panel size
• 120/208V,AC or 230/480V,AC power
• Reduced panel depth

Laureate™ DC voltage and current panel meters with a DC signal conditioner board combine high accuracy with high read rate and a wide range of isolated output options for computer interface and control. Accuracy is 99.99% of full scale ±1 count.

Used as a direct-reading DC voltmeter, the Laureate provides a full-scale readout of ±20,000 counts and six full-scale voltage ranges from 200.00 mV with 10 mV resolution to 600.0 V with 100 mV resolution. The 200.00 mV and 2.000 V ranges provide a high input impedance of 1 Gohm so as to minimize the load on the voltage signal. The maximum voltage which can be applied on the 20, 200 and 300 Vdc ranges is 600 Vac.

Used as a DC ammeter, the Laureate provides a full-scale readout of ±20,000 counts and four full-scale direct-reading current ranges from 2.0000 mA with 0.1 mA resolution to 5.000 A with 1 mA resolution. The 5.000 A range measures the IR drop across a built-in 10 mW current shunt.

Features:

• 0.2, 2, 20, 200, 300V & 600V ranges.
• 2, 20, 200 mA and 5A ranges.
• All ranges factory calibrated.
• 99.99% full scale accuracy.
• 4 1/2 digit resolution to ±19,999 for direct readout in mV, V, mA or A.
• 1 Gohm input impedance on 200 mV and 2 V scales.
• Field scalable from front panel to ±99,999 for use with external current shunts.
• Up to 60 conversions per second.
• Peak value display.

The digital panel meter range, known as the M300 series is primarily designed for use in the power industry, but offers a wide range of both AC and DC input parameters. The applications are limitless.
Customer adjustment of both "ZERO" and "SPAN" is permissible via potentiometers, accessible from the rear of the product.
The meters are 3½ digit with a digit size of 14.2mm (0.56") high, 7 segment matched LEDs allowing viewing from a wide range of angles and distances.

PC&S offers a large inventory of digital panel meters with limitless applications for both AC and DC input parameters. These low-cost solutions provide you with a wide range of monitoring and control applications measuring volts, amps, process, strain. True RMS volt, amp and frequency units are also available.

Choose from bright LED scalable displays in green or red, DIN style cases for fast and simple installation, worldwide input power configurations, fast response with exceptional accuracy. PC&S digital meters also offer communications options for RS-232 and RS-485 and digital meters with dual set-point options for alarm and control.

The M850 MultiPower is a complete 3 phase digital universal metering system in a standard 96 x 96 mm DIN case. It is a cost-effective replacement for traditional panel meters. This multifunction power meter is suitable for low, medium and high voltage control panels, gensets, building management systems, and power management systems.

Features:

• Complete 1-phase and 3-phase digital universal metering system. Covers a majority of applications without any modifications.
• Measures a standard range of 16 different parameters. Easy to use and easy to program from the front panel.
• CT ratios, PT ratios and calibration data is stored in non-volatile EEPROM memory. In power loss conditions, the data is retained.
• Four, easy to access, front control buttons are used for scrolling up or down through the parameters.
• Unique blue LED display is designed to be read in a variety of conditions, including bright sunlight over a very wide viewing angle. There are 8 levels of user-adjustable brightness.