The M850 MultiPower is a UL recognized, complete 3 phase digital universal
metering system in a standard 96 x 96 mm DIN case. It is a cost-effective
replacement for traditional panel meters. This multifunction power meter is suitable for low, medium and high voltage control panels, gensets, building management systems, and power management systems.

Features:

• Complete 1-phase and 3-phase digital universal metering system. Covers a majority of applications without any modifications.
• AC models measure a standard range of 17 different parameters. Easy to use and easy to program from the front panel.
• Free software for monitoring and logging.
• Four, easy to access, front control buttons allow you to scroll up or down through the parameters.

The M850-MPD is a complete DC measuring, digital universal metering system
in a standard 96 x 96mm DIN case. This multifunction power meter is suitable for DC applications ranging from 0-800V,DC (0-10A or 0-50mV shunt operated DC amps). This easy-to-read meter measures, calculates and displays main electrical parameters on your DC system quickly and easily.

Features:

• Complete digital universal metering system. Covers a majority of applications without any modifications.
• Measures a standard range of 9 different parameters. Easy to use and easy to program from the front panel
• Free software for monitoring and logging.
• Four, easy to access, front control buttons allow you to scroll up or down through the parameters.

The MultiDigit is a complete 3 phase digital metering system, in a standard ANSI 4.5 " case. All functions are performed via the two front control buttons, making the MultiDigit simple to use.

Features:

• LED displays
• RS232 or RS485 communications
• The Monitor95 displays all of the parameters, that the MultiDigit is reading
• The MultiDigit has the facility to allow the user to program a 4 digit security code

The MultiDin is designed to be user friendly and simple to use. All operations, including programming are performed by using the two push buttons on the front of the instrument. MultiDin units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in a MultiDin e.g. nominal current and voltage inputs, relay output etc. The reprogramming operations are covered in the manual.

Features:

• Compact 96 x 96 mm Din cased
• Voltage and current measurements are true RMS
• 3 Phase 3 wire unbalanced load power meters
• Measure Volts, Amps, Frequency, Active Power and Apparent Power

The MultiDin is designed to be user friendly and simple to use. All operations, including programming are performed by using the two push buttons on the front of the instrument. MultiDin units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in a MultiDin e.g. nominal current and voltage inputs, relay output etc. The reprogramming operations are covered in the manual.

Features:

• Compact 96 x 96 mm Din cased
• Voltage and current measurements are true RMS
• 3 Phase 4 wire unbalanced load power meters
• Measure Volts, Amps, Frequency, Active Power and Apparent Power

The MultiDin is designed to be user friendly and simple to use. All operations, including programming are performed by using the two push buttons on the front of the instrument. MultiDin units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in a MultiDin e.g. nominal current and voltage inputs, relay output etc. The reprogramming operations are covered in the manual.

Features:

• Compact 96 x 96 mm Din cased
• Voltage and current measurements are true RMS
• Single Phase power meters
• Measure Volts, Amps, Frequency, Active Power and Apparent Power

The MultiDin is designed to be user friendly and simple to use. All operations, including programming are performed by using the two push buttons on the front of the instrument. MultiDin units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in a MultiDin e.g. nominal current and voltage inputs, relay output etc. The reprogramming operations are covered in the manual.

Features:

• Compact 96 x 96 mm Din cased
• Voltage and current measurements are true RMS
• 3 Phase 3 wire unbalanced load power meters
• Measure Volts, Amps, Frequency, Active Power and Apparent Power

The MultiDin is designed to be user friendly and simple to use. All operations, including programming are performed by using the two push buttons on the front of the instrument. MultiDin units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in a MultiDin e.g. nominal current and voltage inputs, relay output etc. The reprogramming operations are covered in the manual.

Features:

• Compact 96 x 96 mm Din cased
• Voltage and current measurements are true RMS
• 3 Phase 4 wire unbalanced load power meters
• Measure Volts, Amps, Frequency, Active Power and Apparent Power

The MultiGen is designed to be user friendly and simple to use. All operations, including programming are performed by using the two push buttons on the front of the instrument.
MultiGen units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in a MultiGen e.g. nominal current and voltage inputs, relay output etc.
Phase voltage and current measurements are true RMS and the coolant and oil pressure are measured directly from the engine senders. Hours Run is timed using the generator frequency and DC volts measured directly from the battery.

Features:

• 96 x 96 mm Din cased
• Single Phase 2 Wire load generator monitoring meter
• Measures Active Power, Volts, Amps, Frequency, Coolant Temperature, Oil Pressure, Hours Run and DC volts
• Relay outputs for temperature and pressure set points

The MultiGen is designed to be user friendly and simple to use. All operations, including programming are performed by using the two push buttons on the front of the instrument.
MultiGen units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in a MultiGen e.g. nominal current and voltage inputs, relay output etc.
Phase voltage and current measurements are true RMS and the coolant and oil pressure are measured directly from the engine senders. Hours Run is timed using the generator frequency and DC volts measured directly from the battery.

Features:

• 96 x 96 mm Din cased
• 3 Phase 3 Wire unbalanced load generator monitoring meter
• Measures Active Power, Volts, Amps, Frequency, Coolant Temperature, Oil Pressure, Hours Run and DC volts
• Relay outputs for temperature and pressure set points

The MultiGen is designed to be user friendly and simple to use. All operations, including programming are performed by using the two push buttons on the front of the instrument.
MultiGen units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in a MultiGen e.g. nominal current and voltage inputs, relay output etc.
Phase voltage and current measurements are true RMS and the coolant and oil pressure are measured directly from the engine senders. Hours Run is timed using the generator frequency and DC volts measured directly from the battery.

Features:

• 96 x 96 mm Din cased
• 3 Phase 4 Wire unbalanced load generator monitoring meter
• Measures Active Power, Volts, Amps, Frequency, Coolant Temperature, Oil Pressure, Hours Run and DC volts
• Relay outputs for temperature and pressure set points

The MultiGen is designed to be user friendly and simple to use. All operations, including programming are performed by using the two push buttons on the front of the instrument.
MultiGen units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in a MultiGen e.g. nominal current and voltage inputs, relay output etc.
Phase voltage and current measurements are true RMS and the coolant and oil pressure are measured directly from the engine senders. Hours Run is timed using the generator frequency and DC volts measured directly from the battery.

Features:

• 96 x 96 mm Din cased
• Single Phase 3 wire load

The MultiGen is designed to be user friendly and simple to use. All operations, including programming are performed by using the two push buttons on the front of the instrument.
MultiGen units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in a MultiGen e.g. nominal current and voltage inputs, relay output etc.
Phase voltage and current measurements are true RMS and the coolant and oil pressure are measured directly from the engine senders. Hours Run is timed using the generator frequency and DC volts measured directly from the battery.

Features:

• 96 x 96 mm Din cased
• 3 Phase 3 wire unbalanced load

The MultiGen is designed to be user friendly and simple to use. All operations, including programming are performed by using the two push buttons on the front of the instrument.
MultiGen units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in a MultiGen e.g. nominal current and voltage inputs, relay output etc.
Phase voltage and current measurements are true RMS and the coolant and oil pressure are measured directly from the engine senders. Hours Run is timed using the generator frequency and DC volts measured directly from the battery.

Features:

• 96 x 96 mm Din cased
• 3 Phase 4 wire unbalanced load