Features and benefits:

• particularly suitable for transferring solvents and other fluids that do not glue, nor crystallize
• safe dry running of the drum pump
• no wear on seals inner tube and helix shaped support bearings completely self-draining - thus preventing from any mixtures of liquids being pumped.
• no contamination of the liquid being pumped by shaft lubricants
• optimum barrel emptying due to ideal impellor design
• to be stripped for cleaning with a minimum of effort
• version in stainless steel tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4108 X

Functional view:

• The inner tube supports the pump shaft, which is lubricated by the liquid. The level of the liquid in the inner tube always corresponds to that in the barrel or container.

The drum pump is available in:

• stainless steel 316 L / 316 Ti (S)
• Polypropylene (PP)
• Polyvinylidenfluoride (PVDF)

Immersion lengths:

• 700, 1000, 1200, 1500mm (other lengths on request)

Features and benefits:

• remains of less than 0,05 l
• especially recommended for high-grade fluids (like e.g. used in cosmetic industry)
• optimum use of the liquid in barrel emptying, thus avoiding expenditures nd/or cost in disposal
• ease of handling
• to be stripped for cleaning with a minimum of effort
• version in stainless steel tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4001 X

Functional view:

• Before the motor is switched off, the flowback stop valve at the pump inlet will be closed by operating the lever. This prevents the liquid flowing back into the empty barrel.

The pump is available in:

• stainless steel 316 L / 316 Ti (S)
• Polypropylene (PP)

Immersion lengths:

• 700, 1000, 1200, 1500 mm (other lengths on request)

Features and benefits:

• suitable for pumping and/or mixing of almost every fluid (e.g. water-based paints)
• with reliable mechanical seal
• optimum barrel emptying due to ideal impellor design
• to be stripped for cleaning with a minimum of effort
• light and handy design - version in stainless steel without additional mixing collar
• version in stainless steel tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4109 X

Functional view:

• by turning the adjusting lever, the pump can either be set to "mixing" or "pumping". Liquids can also be mixed even when being transferred to another container.

The barrel pump is available in:

• stainless steel 316 L / 316 Ti (S)
• Polypropylene (PP)

Immersion lengths:

• 1000 and 1200 mm

Features and benefits:

• all wetted parts are made of stainless steel, ETFE or PTFE
• to be stripped for cleaning and/or sterilization with a minimum of effort
• no contamination of the liquid being pumped by shaft lubricants
• optimum barrel emptying due to ideal impellor design
• also available in 3A version

Functional view:

• the sanitary drum pump can be stripped down within a few seconds because of its ingeniuos design. The F 427 does not have any inaccessible voids. This allows you to completely clean the pump at any time.

The drum pump is available in:

• stainless steel 316 L / 316 Ti (S)

Immersion lengths:

• 700, 1000 and 1200 mm

Features and benefits:

• unique barrel pump design in PP and PVDF throughout the world: a steel cored inner tube provides the ultimate in stability and extended service life of the mechanical seal - even at high temperatures
• sealed inner tube, the liquid being pumped cannot enter the inner tube
• suitable for transferring almost every low viscosity fluid
• optimum barrel emptying due to ideal impellor design
• to be stripped for cleaning with a minimum of effort
• version in stainless steel and Hastelloy C tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 – EC-Type-Examination Certificate No. PTB 00 ATEX 4110 X

Functional view:

• the inner tube houses the shaft, sealed by a mechanical seal. Consequently the shaft does not come into contact with the liquid except for the small section between the impellor and seal

The tote tank pump is available in:

• stainless steel 316 L / 316 Ti (S)
• Hastelloy C (HC)
• aluminium alloy (AL)
• Polypropylene (PP)
• Polyvinylidenfluoride (PVDF)

Immersion lengths:

• 500, 700, 1000, 1200, 1500, 1800, 2000, 2500, 3000 mm (other lengths on request)

Features and benefits:

• powerful, extremely light and handy pump
• particularly suitable for emptying 1000-Litre-Containers
• no floor drains, minimizing leakage risks

Functional view:

• the inner tube houses the shaft, sealed by a mechanical seal. Consequently the shaft does not come into contact with the liquid except for the small section between the impellor and seal

The drum pump is available in:

• Polypropylene (PP)

Immersion lengths:

• 1000, 1200 and 1500 mm

The small drum pump JUNIORFLUX with its fixed collector motor is available with a mechanical seal (F 310) and as a sealless version (F 314). It is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings.

Features and benefits:

• the safe and cost-efficient solution for transferring high value or hazardous liquids
• optimim barrel emptying, remains of less than 0,05 l
• tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0
• with mechanical seal
• to be stripped for cleaning with a minimum of effort

Pump Type:

• F 425 S-41/34 in stainless steel 316 L / 316 Ti

Immersion length:

• 1000 and 1200 mm

Motor Type:

• Commutator motor Type F 460 Ex, 460 Watt, II 2 G EEx de IIC T6
• with power supply cable, 5 m long, and safety plug
• explosion-proof to ATEX, category 2, according to Directieve 94/9/EC, EC-Type-Examination Certificate No. PTB 97 ATEX 1035
• robust double shell housing in aluminium, very low noise level
• improved ventilation system providing optimal cooling and ensuring an extended service life

alternatively:

• Air motor Type F 416 Ex, 470 Watt at 6 bar, II 2 G cp IIC T6
• explosion-proof to ATEX, category 2, according to Directive 94/9/EC, PTB-Registration No. 02 ATEX D022
• very lightweight and extremely powerful motor, overload-proof
• easily variable speed control by adjusting either the air supply pressure or volume

Accessories supplied with the pump:

• Earth ground wire, 2 m long
• Universal hose DN 21, 2 m long, complete with swaged fittings in stainless steel on both ends
• Quick action tap in stainless steel, seal FEP/PTFE
• Compression gland PP, electrically conductive

Features and benefits:

• for transferring acids and alkalis like boric acid, hydrochloric acid, hydrofluoric acid (diluted), phosphoric acid, and liquid fertilizers
• unique barrel pump design in PP throughout the world: a steel cored inner tube provides the ultimate in stability and extended service life of the mechanical seal - even at high temperatures
• sealed inner tube, the liquid being pumped cannot enter the inner tube
• suitable for transferring almost all liquid fluids
• optimum barrel emptying due to ideal impellor design
• to be stripped for cleaning with a minimum of effort

Pump Type:

• F 430 PP-40/33 in Polypropylene

Immersion length:

• 1000 and 1200 mm

Motor Type:

• Commutator motor Type FEM 4070, 500 Watt, IP 24
• with power supply cable , 5 m long, and 3-pole plug
• compact design with optimal cooling and low noise level

New Lever tap PP:

• Exact, sensitive measuring
• Higher flow rate
• Higher operational safety due to improved seal

Accessories supplied with the pump:

• Hose connection PP
• Flexibel PVC hose DN 19, 2 m long
• 2 hose clips
• Quick action tap PP, seal FKM
• Compression gland PP

Features and benefits:

• for transferreing concentrated acids and alkalis like chromic acid, nitric acid, sulphric acid and sodium hypchlorate
• unique barrel pump design in PVDF throughout the world: a steel cored inner tube provides the ultimate in stability and extended service life of the mechanical seal - even at high temperatures
• sealed inner tube, the liquid being pumped cannot enter the inner tube
• optimum barrel emptying due to ideal impellor design
• to be stripped for cleaning with a minimum of effort

Pump Type:

• F 430 PVDF-40/33 in Polyvinylidenfluoride

Immersion length:

• 1000 and 1200 mm

Motor Type:

• Commutator motor Type F 458, 460 Watt, IP 55
• with power supply cable, 5 m ong, and safety plug
• totally enclosed, fan cooled motor design with special corrosion-resistant painting, making this model particularly suitable for use in corrosive, vapour loaden atmospheres

New Lever tap PVDF:

• Exact, sensitive measuring
• Higher flow rate
• Higher operational safety due to improved seal

Accessories supplied with the pump:

• Hose connection PVDF
• Chemical hose DN 19, 2 m long
• 2 hose clips
• Quick action tap PVDF, seal FKM
• Compression gland PP

Features and benefits:

• for transferring high flammability liquids like acetone, ethyl alcohol, methyl alcohol, toluene, xylene
• tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0
• sealless in the liquid section
• safe dry running of the pump
• inner tube and helix shaped support bearings completely self-draining - thus preventing from any mixtures of liquids being pumped
• no contamination of the liquid being pumped by shaft lubricants
• optimum barrel emptying due to ideal impellor design
• to be stripped for cleaning with a minimum of effort

Pump Type:

• F 424 S-43/38 in stainless steel 316 L / 316 Ti

Immersion length:

• 1000 and 1200 mm

Motor Type:

• Commutator motor Type F 460 Ex, 460 Watt, II 2 G EEx de IIC T6
• with power supply cable, 5 m long, and safety plug
• explosion-proof to ATEX, category 2, according to Directive 94/9/EC, EC-Type-Examination Certificate No. PTB 97 ATEX 1035
• robust double shell housing in aluminium, very low noise level
• improved ventilation system providing optimal cooling and ensuring an extended service life

alternatively:

• Air motor Type F 416 Ex, 470 Watt at 6 bar, II 2 G cp IIC T6
• explosion-proof to ATEX, category 2, according to Directive 94/9/EC, PTB-Registration-No. 02 ATEX D022
• extremely light-weight and powerful motor, overload-proof
• easily variable speed control by adjusting either the air supply pressure or volume

Accessories supplied with the pump:

• Earth ground wire, 2 m long
• Universal hose DN 21, 2 m long, complete with swaged fittings in brass on both ends
• Quick action tap in brass nickel-plated, seal FEP/PTFE
• Compression gland PP, electrically conductive

Features and benefits:

• for filling, transferring or dispensing small amounts of acids, alkalis, deionized water, cleaning agents, photo developers
• sealless in the liquid section
• shaft in Hastelloy C
• impellor in ETFE
• outer-Ø 25 mm
• thread on outlet G 1 A (BSP 1" male)
• ease of handling due to lightweight construction (2 kg)
• ergonomic handle for single-hand operation
• optimum carboy emptying due to ideal impellor design

Pump Type:

• F314 PP-25/19 in Polypropylene

Immersion length:

• 700 mm

Motor Type:

• Commutator motor 230 Watt, 230 Volt, 50 Hz, IP 24
• including power supply cable, 5 m long, and 2-speed switch for speed control

Accessories supplied with the pump:

• Hose connector PP
• Flexible PVC hose DN 13, 1,5 m long
• 2 hose clips
• Lever tap PP, seal FKM

Features and benefits:

• for transferring petroleum products like Diesel oil, fuel oil and hydraulic oil
• with mechanical seal
• optimum barrel emptying due to ideal impellor design
• to be stripped for cleaning with a minimum of effort

Pump Type:

• F 430 AL-41/38 in Aluminium alloy

Immersion length:

• 1000 and 1200 mm

Motor Type:

• powerful commutator motor Type F 457, 800 Watt, IP 24
• with power supply cable, 5 m long, and 2-pole plug
• compact design with optimal cooling and low noise level

alternatively:

• Commutator motor Type FEM 4070, 500 Watt, IP 24
• with power supply cable, 5 m long, and 2-pole plug
• with no-volt release, compact design
• with optimal cooling and low noise level

Accessories supplied with the pump:

• Hose connection AL
• 2 m flexible petroleum hose DN 25
• 2 hose clips
• Quick action tap AL, seal NBR
• Compression gland PP

Features and benefits:

• for transferring liquids in the following industries: food, cosmetics, pharmaceutical, paint and varnishes
• tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0
• with mechanical seal
• optimum barrel emptying due to ideal impellor design
• to be stripped for cleaning with a minimum of effort

Pump Type:

• F 430 S-41/38 in stainless steel 316 L / 316 Ti

Immersion length:

• 1000 and 1200 mm

Motor Type:

• Commutator motor Type F 460 Ex, 460 Watt, II 2 G EEx de IIC T6
• with power supply cable, 5 m long, and safety plug
• explosion-proof to ATEX, category 2, according to Directieve 94/9/EC, EC-Type-Examination Certificate No. PTB 97 ATEX 1035
• robust double shell housing in aluminium, very low noise level
• improved ventilation system providing optimal cooling and ensuring an extended service life

alternatively:

• Air motor Type F 416 Ex, 470 Watt at 6 bar, II 2 G cp IIC T6
• explosion-proof to ATEX, category 2, according to Directive 94/9/EC, PTB-Registration No. 02 ATEX D022
• very lightweight and extremely powerful motor, overload-proof
• easily variable speed control by adjusting either the air supply pressure or volume

Accessories supplied with the pump:

• Earth ground wire, 2 m long
• Universal hose DN 21, 2 m long, complete with swaged fittings in stainless steel on both ends
• Quick action tap in stainless steel, seal FEP/PTFE
• Compression gland PP, electrically conductive