The EDI Series Electrodeionization System is a revolution in chemical-free deionization that is cost-effective for all flow rates. No regeneration chemicals are needed. No hazardous waste stream is produced.
Operation is simple, continuous, and facility requirements are reduced. The EDI systems have several different modules to choose from. Our quality management system has been registered to ISO 9001:2008.

Standard Features

• Skid Mounted
• Integral Power Supply
• Operational Instruments
• Epoxy Coated Steel Frame
• Pressure Gauges
• Flow Meters
• Prewired/Preplumbed
• Factory Tested

Mar Cor Purification offers the next generation USP high purity water system, the BioPure LSX. The base system is a compact centralized single pass hot water sanitizable RO-EDI system designed to produce USP purified water
grade.
The BioPure LSX system has been designed to minimize energy consumption, while the automated heat sanitization process allows for greater bacterial control. This reduces the need for chemicals and leads to increase peace of mind and less down time. The BioPure LSX has ethernet and USB connections for remote monitoring and troubleshooting.

Standard Features

• Single pass RO-EDI design
• Single skid, space saving design
• Automatic Hot Water sanitization programs
• All pharmaceutical grade 316L stainless steel tubing and <25Ra wetted surfaces.
• All welds are visually inspected
• Tri-clamp connections aid in sanitary design
• High efficiency motors with variable frequency drive
• Built in electric heater
• Sanitization Break Tank (100 US gallons)
• Fast installation and start-up
• Modulating valves allow user to dial in required flowrates within production range
• Self-adjusting reject flows allow for water savings in high recovery mode
• Differential pressure monitoring across filters and RO membranes

The 2200L is designed to produce up to 1.5 US gpm (5.71 lpm) at 77°F (25°C) of pure water to a storage and delivery system that can pump up to 10 US gpm (38 lpm) of high quality water to various point of use. The entire system is skid mounted on pigmented polypropylene stand with a built-in 140 gallon polyropylene tank making for easy installation and providing uncommonly small footprint. The color touch HMI view coupled with an industrial PLC provides a robust control system for operator ease of use. The system is capable of meeting ASTM type 2 , 3 or 4 and NCCLS type 1, 2, 3 water quality specifications for lab water generation All systems are built to exacting standards in an ISO 9001:2008 registered facility.

Standard Features

• Single Skid Ploypropylene Design to Minimize Site and Electrical Installation, Facilitate Startup, and Minimize Footprint

Reverse Osmosis System

• 1.0 Micron Graded Density Pre-Filter
• Automatic Inlet and Automatic Reject Flush Solenoid
• Multi-Stage 304SS Centrifugal Pump, TEFC
• 316 SS Product Divert Solenoids & Flow Control Valves
• Low Pressure and High Temperature Switches
• Feed and Product Conductivity Transmitters
• Product, Reject and Recycle Flow Rotameters
• Clean-in-Place Ports
• Feed, Pump, Outlet and Reject Pressure Gauges
• Control Panel Emergency Stop Circuit

Distribution System

• Built-in Polypropelne Cone Bottom Tank with Spray Ball
• Digital Tank Level Controller
• Multi-Stage 316 SS Centrifugal Pump, TEFC
• 0.2 Micron Vent Filter & 0.2 Micron Final Filter
• 316 SS Pressure Gauges
• Loop Return Product Conductivity Transmitter
• Sample, Isolation Valves & Pressure Control Valve
• 5.7” Color Touchscreen HMI and PLC
• PLC Data Logging and Remote Monitoring Capabilities
• Panel Main Power Disconnect & Audible Alarm

The 4400L is designed to produce up to 8 US gpm (30 lpm) at 41°F (5°C) of pure water to a storage and delivery system that can pump up to 80 US gpm (303 lpm) of high quality water to various points of use. The color touch HMI view coupled with an industrial PLC provides a robust control system for operator ease of use.

Standard Features

• Single Skid Design to Minimize Site and Electrical Installation and Facilitate Startup

Reverse Osmosis System

• 1.0 Micron Graded Density Pre-Filter
• Automatic Inlet and Automatic Reject Flush Solenoid
• Multi-Stage 304SS Centrifugal Pump, TEFC
• 316 SS Product Divert Solenoids & Flow Control Valves
• Low Pressure and High Temperature Switches
• Feed and Product Conductivity Transmitters
• Product, Reject and Recycle Flow Rotameters
• Clean-in-Place Ports
• Feed, Pump, Outlet and Reject Pressure Gauges

Distribution System

• Cone Bottom Tank with Spray Ball
• Digital Tank Level Controller
• Multi-Stage 316 SS Centrifugal Pump, TEFC
• 0.2 Micron Vent Filter & 0.2 Micron Final Filter
• 316 SS Pressure Gauges
• Loop Return Product Conductivity Transmitter
• Sample, Isolation Valves & Pressure Control Valve
• 5.7” Color Touchscreen HMI and PLC
• PLC Data Logging and Remote Monitoring Capabilities
• Panel Main Power Disconnect
• Audible Alarm

The VPure 4400H is a value designed USP grade water system for use in bacteria controlled applications in the Life Science market. The base system is a compact centralized hot water sanitizable RO system and distribution system with an option for Service DI (SDI) or Electrodeionization (EDI) to polish the RO permeate to USP purified water grade. The system generates Purified Water, stores it and delivers it to the loop. The system has a self-contained air compressor and an electric heat exchanger, saving on expensive plant utility integration. Energy saving features have been included to minimize the impact on the environment.

Standard Features

• Automated Hot Water Sanitization Capability
• 2.5, 5.0, 7.5 & 10.0 gpm RO Permeate Flow Rates
• Distribution Tank, Pump, UV, and Final Filter
• Sanitary 316L Stainless Steel Piping
• Sanitary Stainless Steel RO Membrane Vessels
• Sanitary Permeate Sample Valves
• Manual and Air Actuated Tri Clamp Ball Valves
• On Board & Quiet Air Compressor
• CSA, UL approved NEMA 4/12 Control Panel
• Digital Instrument Package:
• Feed, Reject, Recycle Flow Sensors
• Prefilter Inlet/Outlet, RO Pump Pressure Sensors
• Consistent High Purity Water

The Mar Cor Purification USPure system is a standard single skid design that includes pretreatment, Reverse Osmosis (RO) & Electrodeionization (EDI) on one integrated skid for fast installation & startup. The validatable system offers a pre-designed space saving layout that is cost effective and assures the reliable production of USP grades of high purity water.
The complete system provides for sanitary piping & instrumentation from the RO through to the EDI outlet. The entire system is controlled by a PLC based control system. Two designs are available for sanitization either hot water or chemical.

Applications

The standard single skid approach is applicable to many markets and applications. The systems are designed for USP applications, using
sanitary components, but in nonsanitary applications less expensive
components can be substituted without compromising the product quality or operational reliability.

Some related applications are:

• USP Purified Water
• High Purity Water
• Biotechnology
• Cosmetics
• Medical Device Manufacturing
• Central Lab Systems
• Beverage
• Hospital Central Systems
• Ophthalmics

The RODI Reverse Osmosis/Electrodeionization systems are unique water purification systems that combine reverse osmosis and electro deionization in intergrated units.
The RODI systems will produce high purity water low in TOC, microorganisms and particles with a resistivity up to 18.2 Megohm cm at flows up to 15 gpm. Mar Cor's RODI systems have several different purification modules to choose from (see chart below) that are based on flowrate and intended use. Our quality management system has been registered to ISO 9001:2008.

Standard Features

• Skid Mounted
• Integral Power Supply
• Operational Instruments
• Epoxy Coated Steel Frame
• Pressure Gauges
• Flow Meters
• Prewired/Preplumbed