• 2 mm to 220 mm fork width
• Aluminium housing
• Plug connection
• Infrared or visible red light source
• Sensitivity adjustment via potentiometer
• Switch selectable light or dark function
• Output indicator
• High tolerance to hostile environments
• 10-35 V dc supply voltage
• 3 wire, NPN or PNP output
• Fast response time

The OFS series consists of self-contained optical fork sensors that are housed in a durable, U-shaped aluminium housing which operates in thru-beam mode. The series is available with a wide variety of fork opening widths, ranging from 2 mm to 220 mm.
The complete series is available as a 3 wire, NPN or PNP transistor output with a 10-35 V dc supply voltage. All models offer sensitivity adjustment via integral potentiometer and are available with switch selectable light or dark function. The complete series offers a high switching frequency of up to 5000 Hz.
The series is protected against reverse polarity of power supplies and output signals. The output is protected against short circuit and inductive loads.
All products include a 3-year worldwide warranty.

• 50 mm to 250 mm frame width
• Aluminium housing with or without cross bar
• Plug connection
• Infrared light source
• Sensitivity adjustment via potentiometer
• Pulse stretching adjustment via potentiometer
• Dynamic or static detection principle
• Output indicator
• High tolerance to hostile environments
• 24 V dc supply voltage
• 3 wire, PNP output
• Fast response time
• High resolution from 0,5 mm

The OAS series consists of self-contained optical frame sensors that are housed in a durable, aluminium frame housing which operates in thru-beam mode. The series is available in a variety of frame sizes, ranging from 50 mm to 250 mm, with (OAST) or without (OAS) cross bar construction.
The complete series is available as 3 wire, PNP transistor output with a 24 V dc supply voltage. All models offer sensitivity adjustment and pulse stretching adjustment via integral potentiometers. The complete series offers a high switching frequency of 5000 Hz and high resolution ranging from 0,5 mm to 4,0 mm.
The series is protected against reverse polarity of power supplies and output signals. The output is protected against short circuit and inductive loads.

• Operation mode and max sensing range:
• Thru-beam: Dependent on amplifier
• (up to 70m)
• Diffuse proximity: Dependent on amplifier
• (up to 5m)
• Optional sensor monitor LED
• Wide variety of housings
• High tolerance to hostile environments
• Cable or plug connections
• Available with optional ATEX approval

The remote sensor series, which consists of a transmitter LT and receiver LR, is made to operate in conjunction with a Telco photoelectric amplifier from the PA, MPA or PAB programmes.
The remote sensors are available in a wide range of housings, with either cable or plug connection, and may be used in thru-beam or diffuse proximity mode.
The series is available with optional power-(LR) and output-(LT) monitor LEDs for use with any Telco photoelectric amplifier which has the sensor LED drive feature incorporated.
All products include a 3-year worldwide warranty.

• Operation mode and max sensing range:
• Thru-beam: Dependent on amplifier
• (up to 70m)
• Diffuse proximity: Dependent on amplifier
• (up to 5m)
• Optional sensor monitor LED
• Wide variety of housings
• High tolerance to hostile environments
• Cable or plug connections
• Available with optional ATEX approval

The remote sensor series, which consists of a transmitter LT and receiver LR, is made to operate in conjunction with a Telco photoelectric amplifier from the PA, MPA or PAB programmes.
The remote sensors are available in a wide range of housings, with either cable or plug connection, and may be used in thru-beam or diffuse proximity mode.
The series is available with optional power-(LR) and output-(LT) monitor LEDs for use with any Telco photoelectric amplifier which has the sensor LED drive feature incorporated.
All products include a 3-year worldwide warranty.

• Operation mode and max sensing range:
• Thru-beam: Dependent on amplifier
• (up to 70m)
• Diffuse proximity: Dependent on amplifier
• (up to 5m)
• Optional sensor monitor LED
• Wide variety of housings
• High tolerance to hostile environments
• Cable or plug connections
• Available with optional ATEX approval

The remote sensor series, which consists of a transmitter LT and receiver LR, is made to operate in conjunction with a Telco photoelectric amplifier from the PA, MPA or PAB programmes.
The remote sensors are available in a wide range of housings, with either cable or plug connection, and may be used in thru-beam or diffuse proximity mode.
The series is available with optional power-(LR) and output-(LT) monitor LEDs for use with any Telco photoelectric amplifier which has the sensor LED drive feature incorporated.
All products include a 3-year worldwide warranty.

• Operation mode and max sensing range:
• Thru-beam: Dependent on amplifier
• (up to 70m)
• Diffuse proximity: Dependent on amplifier
• (up to 5m)
• Optional sensor monitor LED
• Wide variety of housings
• High tolerance to hostile environments
• Cable or plug connections
• Available with optional ATEX approval

The remote sensor series, which consists of a transmitter LT and receiver LR, is made to operate in conjunction with a Telco photoelectric amplifier from the PA, MPA or PAB programmes.
The remote sensors are available in a wide range of housings, with either cable or plug connection, and may be used in thru-beam or diffuse proximity mode.
The series is available with optional power-(LR) and output-(LT) monitor LEDs for use with any Telco photoelectric amplifier which has the sensor LED drive feature incorporated.
All products include a 3-year worldwide warranty.

• Operation mode and max sensing range:
• Thru-beam: 1-15 m
• Cable or plug connection
• Sensitivity adjustment via control input
• Wide variety of housings
• Power and output indicator
• High voltage tolerance to hostile environments
• 10 - 30 V dc supply voltage
• 3 wire, NPN or PNP transistor output

The 3000 series consists of a self-contained transmitter SMT, and a receiver SMR, which are to be used in thru-beam mode. The complete series is available in a wide range of housing with either cable or plug connection.
The SMR is supplied with a 10-30V dc supply voltage with a 3 wire, NPN or PNP transistor output with a choice between light or dark function.
The control input in the SMT may be used for either disabling or enabling the transmitting power temporarily for test purpose, multiplexing applications or as a gradual regulation of the transmitting power level.
Both the transmitter and receiver are protected against reverse polarity of power supplies, control input and output signals. The ouput is also protected against short circuit and inductive loads.
All products include a 3-year worldwide warranty.

• Operation mode and max sensing range:
• Thru beam: 1-10 m
• Cable or plug connection
• Sensitivity adjustment via control input
• Power and output indicator 10 – 30 V dc supply voltage
• 3 wire, NPN or PNP transistor output
• Narrow optical beam
• TUV approved as safety device (AOPD) for power operated doors and gates acc. EN12978

The 3000/CAT2 series consists of a self-contained transmitter SMT and a receiver SMR, which are to be used in thru beam mode. The complete series is available in a wide range of housings with either cable or plug connection.
The SMR is supplied with a 10-30 V dc supply voltage with a 3 wire, NPN or PNP transistor output in light operated.
The control input in the SMT may be used for either disabling or enabling the transmitting power temporarily for test purpose, multiplexing applications or as a gradual regulation of the transmitting power level.
Both the transmitter and receiver are protected against reverse polarity of power supply, control input and output signal. The output is also protected against short circuit and inductive loads.
All products include a 3-year worldwide warranty.

• Operation mode and max sensing range:
• Thru-beam: 1-6 m
• Cable or plug connection
• Sensitivity adjustment via control input
• Wide variety of housings
• Power and output indicators
• High tolerance to hostile environments
• 10 – 32 V dc supply voltage
• 3 wire, NPN or PNP output or
• 4 wire, NPN/PNP opto isolated output
• 5 or 0,5 ms response time
• Low current consumption

The 6000 series consists of a self-contained transmitter SMT, and a receiver SMR, which are to be used in thru-beam mode. The complete series is available in a wide range of housings with either plug or cable connection.
The SMR is supplied with a 10-32 V dc supply voltage with either a 3 wire, NPN or PNP or as a 4 wire, NPN/PNP opto-isolated transistor output with a choice between light or dark function. The SMR is available with either a 0.5 ms response time and a 2 metre range, or with a 5 ms response time and a 6 metre range. The control input in the SMT may be used for either disabling or enabling the transmitting power temporarily for test purpose, multiplexing applications or as a gradual regulation of the transmitting power level.
Both the transmitter and receiver are protected against reverse polarity of power supplies, control input and output signals. The output is also protected against short circuit and inductive loads.
All products include a 3-year worldwide warranty.

• Operation mode and max sensing range:
• Thru-beam: 0-20 m
• Diffuse proximity: 0-0,5 m
• Retro reflective: 0-3 m
• Fibre: Dependent on the fibre optic
• Cable or Plug connection
• Sensitivity adjustment via potentiometer
• Switch selectable light or dark function
• Power and output indicators
• High tolerance to hostile environments
• 10-30 V dc supply voltage
• 4 wire, NPN/PNP transistor output or
• 4 wire, ambivalent PNP/PNP transistor output
• Test input

The 7000 series consits of a self-contained transmitter SMT, and a receiver SMR which are to be used in thru-beam mode, an SMP for diffuse proximity, SMRR for retro reflective and an SMPF for use with fibre optical cables. All are offered with sensitivity adjustment via integral potentiometer with either cable or plug connection.
The complete series is available either as 4 wire, NPN, PNP transistor output or 4 wire ambivalent PNP/PNP output with a 10-30 V dc supply voltage, both offering switch selectable light or dark function. The SMR is available with either a 0.5 ms response time and a 7 metre range or with a 2 ms response time and a 20 metre range. The control input in the SMT is intended to be used for disabling or enabling the transmitting power temporarily for test purpose or for multiplexing applications.
The complete series is protexted against recerse polarity of power supplies, control input and output signals. The output is protected against short circuit and inductive loads.
All products include a 3-year worldwide warranty.

• Operation mode and max sensing range:
• Thru-beam: 0-20 m
• Diffuse proximity: 0-0,5 m
• Retro reflective: 0-3 m
• Fibre: Dependent on fibre optic
• Cable or plug connection
• Sensitivity adjustment via potentiometer
• Switch selectable light or dark function
• Power and output indicators
• High tolerance to hostile environments
• 10-30 V dc or 20-250 V ac supply voltage
• 3 wire, NPN or PNP transistor output or
• 2 wire, SCR output
• Test input
• Available with optional ATEX approval

The 8000 series consists of a self-contained transmitter SMT, and a receiver SMR which are to be used in thru-beam mode, an SMP for diffuse proximity, SMRR for retro reflective and an SMPF for use with fibre optic cables. All are offered with sensitivity adjustment via integral
potentiometer with either cable or plug connection.
The complete series is available either as 3 wire, NPN or PNP transistor output with a 10-30 V dc supply voltage, or as 2 wire, SCR output with a 20-250 V ac supply voltage both offering switch selectable light or dark function. The control input in the 10-30 V dc SMT is intended to be used for disabling or enabling the transmitting power temporarily for test purpose or for multiplexing applications.
The dc series is protected against reverse polarity of power supplies, control input and output signals. The output is protected against short circuit and inductive loads.
All products include a 3-year worldwide warranty.

• Operation mode and max sensing range:
• Thru-beam: 0 –45 m
• Diffuse proximity: 0–3 m
• Retro reflective: 0 –12 m
• Polarised retro reflective: 0 –10 m
• Background suppression: 0 –1.5 m
• Compact rectangular housing (50 x 50 mm)
• Cable or rotatable plug connection
• Sensitivity adjustment via potentiometer
• Switch selectable light or dark function
• Adjustable on/off time delay
• Power, output and signal level indicators
• 10-30 V dc or 12-240 V ac/dc supply voltage
• 4 wire, NPN/PNP transistor output or
• 5 wire relay output

The SP 2000 series consists of a self-contained transmitter SPT and receiver SPR, which are to be used in thru-beam mode, an SPP for diffuse proximity, SPRR for retro-reflective, SPPR for polarised retroreflective and SPBS for background suppression. All are offered with sensitivity adjustment via integral potentiometer with either cable or 180 rotatable plug connection.
The complete series is available either as a 4 wire, NPN/PNP transistor output with 10-30 V dc supply voltage or as a 5 wire, relay output with a 12-240 V ac/dc supply voltage both offering switch selectable light or dark function and potentiometer adjustable 0 -10 sec on/off time delay.
The test input in the 10-30 V dc, SPT is intended to be used for disabling or enabling the transmitter power temporarily for test purposes or for multiplexing applications.
The dc series is protected against reverse polarity of power supplies, test input and output signals. The output is protected against short circuit and inductive loads.
All products include a 3-year worldwide warranty.