Multifunctional tester for internet/network equipment, a simple tester for four different connectors: RJ-45, RJ-11, USB, and BNC.
Features:
- USOC 4/6/8
- 10/100 Ethernet STP/UTP
- 10Base2/5 Coaxial
- CATV Coaxial
- Cable Modem Coaxial
- EIA/TIA-568
- EIA/TIA-568A/B
- Cabling systems before or after installation
- Open/Short test
- Connected wires display
- No wire and terminator indications
- Wrong connection/non-parallel connection
- 4 types of connectors provided to test a variety of LAN cables
- Seperate module design for testing 2 remote ends
- Automatic deactivation for power saving
- Palm size design, easy to carry around

Multifunctional tester for internet/network equipment; a simple tester for RJ-45, RJ-11, USB cable, ethernet hub and ethernet card.
Features:
- Ethernet troubleshooting
- Datacom cables troubleshooting
- Voice troubleshooting
- Data troubleshooting
- 9V/DC battery requirements
- EIA/TIA-568
- EIA/TIA-568A/B
- Cabling systems before or after installation
- Open/Short test
- Connected wires display
- No wire and terminator indications
- Wrong connection/non-parallel connection
- Test ethernet port and adapter
- 3 types of connectors provided to test a variety of LAN cables
- Seperate module design for testing 2 remote ends
- Automatic deactivation for power saving
- Palm size design with bag, easy to carry around

AC Adapter DPS and network testing equipment.

Carrying strap for EtherScope Series II Network Assistant.

Stylus for EtherScope II.

Digital insulation testing up to 5000 volts.
The Fluke 1550B is a digital insulation tester capable of testing switchgear, motors, generators and cables at up to 5000 V DC. It can be used for a wide range of tests: from simple spot checks to timed tests and breakdown tests. Measurement storage and PC interface software make it ideal for preventive maintenance. Heavy-duty leads, probes and alligator clips fit in the custom carrying case, for a rugged field testing kit.
Features
- Test voltages of 250V, 500 V, 1000 V, 2500 V, and 5000 V
- Capable of testing in 50V increments between 250V and 1000V and 100V increments between 1000V and 5000V
- Measures 0 to 1 Tera-Ohm
- Warning voltage function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC
- Guard system eliminates the effect of surface leakage current on high-resistance measurements
- Large digital/analog LCD shows detailed measurement data
- Cable or insulation capacitance
- Leakage current
- Ramp function (0-5000 V DC) for breakdown testing
- Timer 1 to 99 minutes
- Polarization index and dielectric absorption calculated automatically
- 99 memory locations store all measurements parameters
- Includes FlukeView Forms Basic Software and Optical
Interface cable for easy download to a Windows (R) PC
Included Accessories:
- Test leads and low-leakage probes
- Alligator Clips
- Interface adapter and cable
- FlukeView software
- Line cord
- Soft carrying case with waterproof bottom
- User's manual

Handheld cable tester which enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cabling.
Features:
- Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs
- Easy-to-read fault display
- Tone generator for tracing installed cables hidden in walls, floors and ceilings
- Remote unit enables one-person testing of installed cables
Package Includes:
- MicroMapper
- MicroMapper Remote
- Patch cable
- Carrying case
- 6-volt alkaline battery
- User guide

The MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs. Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults in your cable.
Features:
- Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs
- Easy-to-read fault display
- Tone generator for tracing installed cables hidden in walls, floors and ceilings
- Remote unit enables one-person testing of installed cables
Includes:
- MicroMapper
- MicroMapper Remote
- patch cable
- 6-volt alkaline battery
- user guide

MicroMapper Pro VDV Cable Tester is an easy-to-use voice, data, and video cable tester. It is designed to quickly test termination and length reliability.
Features:
- Integrated coax connector
- Supports up to 8 cable IDs for faster installations
- Length meter shows distance to fault for faster trouble shooting
- Large LCD for clear results
- Full wiremap shows type and location of fault (miswires, reversals, split pairs, and breaks)
- Built-in toner for locating and isolating wire pairs
- Analog tones: [400Hz, 1KHz]
Package Contents:
- (1) MicroMapper Pro VDV Cable Tester
- (1) #1 Cable ID
- (1) F-type adapter
- (1) Batteries
- (1) Getting Started Guide

Soft storage case for ES-LAN.

Coaxial Cable Tester provides quick verification of opens or shorts in either the conductor or the shield of coax cable.
Features:
- Simple operation provides pass/fail indication before or after installation
- Clear Red/Green LED indication of short or open conditions
- Remote terminator allows testing of cables before or after installation
- Standard BNC and f-type female jacks
- Battery-operated (9V included)

Certifies Category 5/Class D twisted pair cabling. Autotest suite includes Power Sum NEXT, Attenuation, Power Sum ACR, Length, WireMap, Propagation Delay, Delay Skew and headroom margin. Operates from AA cells, AC/mains adapter, or optional Ni-MH battery pack. Includes hard carrying case.
Features:
- 115 volt / 60 hz
- Certifies 100 MHz CAT 5 cabling
- Built-in two-way talk set
- Cable toner for locating cable ends
- Saves 800 autotest reports
- Report Manager PC software
- Optional vinyl handset covers
- Fiber optic cable testing options
- CE compliant

Certifies twisted pair cabling to the most demanding TIA Category 5e Level IIe requirements. Autotest suite includes PS-NEXT, Attenuation, EL-FEXT, Return Loss, Length, Propagation Delay, Delay Skew and WireMap. Save up to 800
Autotest reports for upload to a PC using provided Windows-based Report Manager software. Operates from AA cells, AC/mains adapter, or optional Ni-MH battery pack. Includes hard carrying case.
Features:
- 115 volt / 60 hz
- Certifies CAT 5 and Enhanced CAT 5e cabling
- Tests PS-NEXT and PS-ACR to 250 MHz
- Built-in two-way talk set
- Cable toner for locating cable ends
- Fiber optic cable testing options
- Thermoform handset covers
- CE compliant

The Pro2000 Coax Stripper is a fixed blade, coaxial cable stripping tool for cable diameters of 0.1 to 0315 inch (2.5 to 8.0 mm) including RG58, RG59, RG62, RG6, RG174, Belden 8281, and Belden 1694A. An interchangeable "memory" blade cassette holder eliminates the need to re-adjust blades when changing cable types and sizes, and provides effortless operation.

This basic Ethernet cable tester is one of the most affordable coaxial cable testers in the market. Use it to quickly root out shorts, open wires or other continuity problems in BNC and TNC-terminated coaxial cables. Installed cables can be tested with the included remote terminator.
Features:
- Detects shorts and open pins in BNC and TNC cables
- Simple good/bad results display
- Test installed cables with included remote terminators
- Includes storage pouch

Easy and effective cable tester that can test a wide range of coax cables from regular TV to satellite dish cables. Not only identify the wiring faults, but also test up to 4 different cables at one end. Simple and easy to use.
Features:
- Test for wiring faults of satellite dish cables
- Identify up to 4 different cables at one end using the provided remote identifiers
Specifications:
- Cable Tested: Core to Shield
- LED display:
- Green Power on LED
- Red Low Battery LED
- 4 green Good Cable ID LED
- 1 red Cable Short LED
- Test Length:
- Min. 1.2M
- Max. 200M
- Slide Switch: Power on/off
- Power: 9V alkaline DC Battery (not included)
- Size:
- Main unit: 105x31/25mm
- Remote: 52x31x25mm
- Weight:
- Main unit: 110g
- Remote: 26g

Identifies continuity problems such as shorts, open wires, reversed pairs, crossed pairs and miswiring for 10BASE-T, 100BASE-T, EIA/TIA 568A/568B and Token Ring cables. Verify shield integrity for all STP cables. Use the included remote terminator to test installed cables.
Features:
- Tests continuity of UTP/STP cables
- Verifies adherence to 10BASE-T, 100BASE-T, TIA-568A, TIA-568B and Token Ring wiring standards
- Verifies shield integrity
- Clear and simple LED display
- Tests installed cables with included remote identifier
- Includes storage pouch
Specifications:
- Power Source: (One) DC 9V battery
- Power Consumption: 9mA
- Operating Temp: 0~50 degrees C
- Storage Temp: -10~60 degrees C
- Humidity: 0 to 95%(non-condensing)
- Dimensions:
- Main: 104mm x 63mm x 29mm
- Remote: 104mm x 30.5mm x 29mm
- Safety Approval: CE
- Approx. Weight: 140g(Kit) / 40g(Remote)

Identifies continuity problems such as shorts, open wires, reversed pairs, crossed pairs and miswiring for 10BASE-T, 100BASE-T, EIA/TIA 568A/568B and Token Ring cables. Verify shield integrity for all STP cables. Use the included remote terminator to test installed cables.
Features:
- Tests continuity of UTP/STP cables
- Verifies adherence to 10BASE-T, 100BASE-T, TIA-568A, TIA-568B and Token Ring wiring standards
- Verifies shield integrity
- Clear and simple LED display
- Tests installed cables with included remote identifier
- Includes storage pouch
- RoHs compliant

The new cable tester is specially designed to test the full range of the ever-expanding Ethernet cable configurations. It will identify if the wiring of UTP/STP cables are straight-through, 10/100BASE-T crossover, or 1000BASE-T crossover. With the included Remote unit, cables can be tested either before or after installation. In just seconds, the GIGAtest-E will verify compatibility of network cabling and network devices, as well as determine cabling faults. The GIGAtest-E is a must-have companion for today’s network technicians who need to maximize network performance.
Features:
- Main and Remote units for one-person testing
- Determines suitability of cabling for 1000BASE-T networks
- Compact and light-weight design for easy storage
- Low Battery Indicator
- Easy-to-read result

LANsmart Pro is a hand-held, multifunction Cable Map Tester and Cable Length Meter that is suitable for professional technicians or installers.
Features:
- Has an integrated Analog and Digital Tone Generator, Port Finder, and Quick Test
- Displays cable map results in a pin-to-pin format including split pairs
- All-in-one tester; wire map, twisted mapping, short location, quick test, cable length test, self-calibrating ability, analog and digital tone generator and port finder
- Incorporates TDR (Time Domain Reflect) technology
- Wire map for open, short, reversed, cross, split, miswire, and shield continuity
- Indicates the remote number of the remote identification unit for wire map test
- Incorporate Short Location function: locate short position, it determines if short is in the near or far end of the cable
- Measures twisted pairs of Cat5, Cat5E, and Cat6 length without remote
- Measures length of flat 2-pin, 4-pin and 6-pin telephone line
- Measures coax line length
- Self-calibrating ability for non-standard cables length display
- Incorporate Quick Test function: Memorize a cable's pin out as standard, and test mass cables
- Incorporates Port Finder function: locate corresponding socket on hub/switch
- Its Analog Tone Generator sends 1K Hz tone on all pins or selected single pin conductors
- Its Digital Tone Generator sends Single Tone and Double Tone
- LCD and "beep" indicator
- RJ45/ RJ11/ COAX port protection from telephone line damage
- Includes 4 remotes/ID function that test RJ11, RJ45 and coaxial cable
- Replaceable battery, with low battery indicator
Specifications:
- Display: 128*64 dot matrix LCD
- Connector type: RJ45/ RJ11/ COAX (main and remote)
- Accuracy:
- ± 2m
- ± 5% > 10m (32.81 feet)
- Test range for cable length: 0 - 300m (0 - 984 ft.)
- Split pairs detection: minimum 1.2m (3.94 ft.)
- Operating Temp: 0~50 degrees C
- Storage Temp: -30~50 degrees C
- Humidity: 10 to 90%
- Dimensions:
- Master- 80 x 33 x 120mm
- Remote- 44 x 28.5 x 42mm
- Power source: DC 6V; 4*AAA

Multi-functional network cable tester. In addition to detecting basic wire connections like open, short, mis-wired and split pairs, it can also measure the cable length using TDR (Time Domain Reflectometers) technology in real time. LANsmart displays the results in pin-to-pin format. When there is any open/short fault in the cable, LANsmart will detect, locate, and display the fault. LANsmart can also send out audio signals to help find the corresponding cables; users can also send out auto negotiation signals to find out the corresponding hub/switch ports. Compact, ergonomic, and easy to operate. Advanced functionalities and versatility make LANsmart an ALL-IN-ONE tester suitable for all professional technicians and installers.
Features:
- TDR (Time Domain Reflectometer) Technology
- Tests for shorts, opens, mis-wires, reversals, split pairs, and shield continuity
- Built-in PORTfinder to locate corresponding sockets on hub/switch
- Measures length on UTP and STP cable without remotes
- Velocity of Propagation Adjustable Calibrate ability for non-standard cables to increase measuring accuracy
- Locates problems in both meter (m) and feet (ft) standards
- Tone Generator sends signals to either all or selected pin conductor/s
- Test results displayed in pin-to-pin/Wiremap format
- Compatible with any twisted pair of category 3/4/5 and 6 cables
- Battery operated, compact and easy to use
Specifications:
- Display: 122 x 32 Dot Matrix LCD (56mm x 29mm)
- Connector Type: RJ45 (main & remote)
- Accuracy:
- ± 2m
- ± 5% > 10m (32.81 feet)
- Approximate test range: 1-500m (3.28 – 1640.42 feet)
- Split pair detection minimum: 1m (3.28 feet)
- Tone Generator: 1 KHz
- Operating Temp: 0~50 degrees C
- Storage Temp: -30~50 degrees C
- Humidity: 10 to 90%
- Dimensions: 82 x 138 x 32 mm
- Power Source: 3 x AAA Alkaline Batteries
- Safety Approval: CE
- Battery Life: 4 hours continuous use

Multi-functional network cable tester. In addition to detecting basic wire connections like open, short, mis-wired and split pairs, it can also measure the cable length using TDR (Time Domain Reflectometer) technology in real time. LANsmart displays the results in pin-to-pin format. When there is any open/short fault in the cable, LANsmart will detect, locate, and display the fault. LANsmart can also send out audio signals to help find the corresponding cables; users can also send out auto negotiation signals to find out the corresponding hub/switch ports. Compact, ergonomic, and easy to operate. Advanced functionalities and versatility make LANsmart an ALL-IN-ONE tester suitable for all professional technicians and installers.
LANsmart Cable Tester Features:
- RoHS compliant
- TDR (Time Domain Reflectometer) Technology
- Tests for shorts, opens, mis-wires, reversals, split pairs, and shield continuity
- Built-in PORTfinder to locate corresponding sockets on hub/switch
- Measures length on UTP and STP cable without remotes
- Velocity of Propagation Adjustable Calibrate ability for non-standard cables to increase measuring accuracy
- Locates problems in both meter (m) and feet (ft) standards
- Tone Generator sends signals to either all or selected pin conductor/s
- Test results displayed in pin-to-pin/Wiremap format
- Compatible with any twisted pair of category 3/4/5 and 6 cables
- Battery operated, compact and easy to use
Specifications:
- Display: 122 x 32 Dot Matrix LCD (56mm x 29mm)
- Connector Type: RJ45 (main & remote)
- Accuracy:
- ± 2m
- ± 5% > 10m (32.81 feet)
- Approximate test range: 1-500m (3.28 – 1640.42 feet)
- Split pair detection minimum: 1m (3.28 feet)
- Tone Generator: 1 KHz
- Operating Temp: 0~50 degrees C
- Storage Temp: -30~50 degrees C
- Humidity: 10 to 90%
- Dimensions: 82 x 138 x 32 mm
- Power Source: 3 x AAA Alkaline Batteries
- Safety Approval: CE
- Battery Life: 4 hours continuous use

Used to read the actual wiring configuration for Cat5; coaxial and modular telephone cables by comparing one transmitting end to another receiving end. Cabling faults such as open wires, shorts, mis-wiring and crossed pairs are crystal clear with the LANtest’s unique LED display. Perform all the above tests on installed cables with the included remote terminator.
Features:
- Can test the correct pin configuration of 10Base-T 10Basc-2 Thin Ethernet cable, RJ45/RJ11 modular cables 356A, TIA-568A/568B and Token Ring cable, etc
- Easy to verify cable continuity, open, short and mis-wire
- With remote kit, it can remotely test cable up to 1000 ft away either on wall plate or patch panel
- Can test the grounding
- Auto or manual scan for pin-out indicators
- Power switch provided for saving battery power
Specifications:
- Power Source: (one) DC 9V battery
- Power Consumption: 22mA
- Operating Temp: 0~50 degrees C
- Storage Temp: -10~60 degrees C
- Humidity: 0 to 95%(non-condensing)
- Dimensions:
- Main: 104mm x 63mm x 29mm
- Remote: 104mm x 30.5mm x 29mm
- Safety Approval: CE
- Approx. Weight: 195g(Kit) / 45g(Remote)

The new LANtest-E features a brand new compact design with the functions of the original LANtest. It is practical, easy to use, and provides crystal-clear results. LANtest-E maps actual wiring configurations for 10/100BASE-T cables, BNC cables, RJ45/RJ11 modular cables, 258A, EIA/TIA 568A/568B and token ring cables. With the included Remote unit, one-person testing of cables installed in walls or patch panels is easy.

Quickly test modular cable RJ-11 pin continuity and miss-wiring. Also test if the cable is reverse wired or straight-thru wired.

Used for quickly testing modular cable RJ-45 pin continuity and miss-wiring. Also test if the cable is reverse wired or straight-thru wired.

Designed for quick testing of network cables. Features high speed auto scanning for wire continuity, mis-wiring and shield integrity. Test TIA568A/568B, Token Ring and 10/100Base-T (UTP/STP) cables. Test installed cables with the compact remote terminator that conveniently "piggy-backs" onto the master unit to prevent misplacement.
Features:
- High speed testing of UTP/STP and coaxial cables
- Verifies adherence to 10BASE-2, 10BASE-T, 100BASE-T, TIA-568A, TIA-568B and Token Ring wiring standards
- Verifies shield integrity
- Power switch
- Piggy-back remote terminator design
- Includes storage pouch
Specifications:
- Power Source: (One) DC 9V battery
- Power Consumption: 10mA
- Operating Temp: 0~50 degrees C
- Storage Temp: -10~60 degrees C
- Humidity: 0 to 95%(non-condensing)
- Dimensions:
- Main: 80mm x 60mm x 31mm
- Remote: 49mm x 60mm x 31mm
- Safety Approval: CE
- Approx. Weight: 90g(Kit) / 35g(Remote)

Designed for quick testing of network cables. Features high speed auto scanning for wire continuity, mis-wiring and shield integrity. Test TIA568A/568B, Token Ring and 10/100Base-T (UTP/STP) cables. Test installed cables with the compact remote terminator that conveniently "piggy-backs" onto the master unit to prevent misplacement.
Features:
- RoHS Compliant
- High speed testing of UTP/STP and coaxial cables
- Verifies adherence to 10BASE-2, 10BASE-T, 100BASE-T, TIA-568A, TIA-568B and Token Ring wiring standards
- Verifies shield integrity
- Power switch
- Piggy-back remote terminator design
- Includes storage pouch
Specifications:
- Power Source: (One) DC 9V battery
- Power Consumption: 10mA
- Operating Temp: 0~50 degrees C
- Storage Temp: -10~60 degrees C
- Humidity: 0 to 95%(non-condensing)
- Dimensions:
- Main: 80mm x 60mm x 31mm
- Remote: 49mm x 60mm x 31mm
- Safety Approval: CE
- Approx. Weight: 90g(Kit) / 35g(Remote)

Specifically designed to test modular-terminated (RJ45, RJ11, RJ12) for wire continuity and mis-wiring. Can be used to test a variety of pin configurations such as USOC 4, USOC 6 and USOC 8, whether the pins are crossed or wired straight through. Perform all of the above tests on installed cables with the remote terminator.
Features:
- Determines continuity faults for modular cables with RJ11/RJ12/RJ45 connections
- Compares wiring configuration to USOC 4/USOC 6/USOC 8 standards
- Identifies wiring shorts, open wires, crossed pairs, reversed pairs and miswiring
- Tests installed cables with included remote terminator
- Includes storage pouch
Specifications:
- Power Source: (One) DC 9V battery
- Power Consumption: 9mA
- Operating Temp: 0~50 degrees C
- Storage Temp: 10~60 degrees C
- Humidity: 0 to 95%(non-condensing)
- Dimension: 104mm x 63mm x 29mm and Remote: 104mm x 30.5mm x 29mm
- Safety Approval: CE
- Approx. Weight: 130g(Kit) / 35g(Remote)

NETfinder Pro is an expanded version of NETfinder. This Pro version adds the Cable Organizer function to allow it to work with up to 18 remote ID’s, which means it can identify hub/switch ports at the closet level, and to match cables at up to 18 different locations. The Cable Organizer function enables identification of a larger number of mislabeled cables quickly and effortlessly.
NETFinder Pro Features:
- 18 remote units for larger installation
- Compact in size so everything fits into one pouch
- Tests for wiring faults of open, short, reversed and crossed pairs
- Verification of shield integrity
- Specially designed remote unit that enables one person to test installed cables
- Built-in Portfinder function to trace ports back to switch
- Easy to read fault display and high speed testing
- Low battery indicator
- Tone Generator Features
Specifications:
- Power Source: DC 9V battery
- Power Consumption: 22mA
- Operating Temp: 0~50C
- Storage Temp: -10~60C
- Humidity: 0 to 95%(non-condensing)
- Dimensions:
- Main Unit: 104mm x 63mm x 29mm
- Remote: 104mm x 30.5mm x 29mm
- Additional Remote: 15mmx15mmx45mm
- Safety Approve: CE
- Approx. Weight: 159g(Kit) / 45g(Remote)/10g(Organizer)
- RoHS compliant

Comprehensive cable tester used to diagnose wiring faults for 10BASE2 (Coax), 10BASE-T, and 100BASE-Tx, TIA-586A, TIA-568B & Token Ring cables. Identify wiring faults such as open wires, shorts, reversed pairs, crossed pairs, split pairs and mis-wiring. Identify up to 4 different cables from the tested end. With a push of a button, the NETest will automatically scan all wires and pairs to determine any existent faults. A large alphanumeric LED displays the fault code; while a series of smaller LEDs indicate which pair the fault is existent on. For testing of installed cables, 4 remote terminators are provided. The terminators are also used to identify which cable is being tested. Makes cable testing for multiple LAN interfaces virtually effortless.
Features:
- High speed testing and detailed fault identification of UTP/STP and coaxial cables
- Verifies adherence to 10BASE-2, 10BASE-T, 100BASE-T, TIA-568A, TIA-568B and Token Ring wiring standards
- Identifies shorted wires, open wires, crossed pairs, reversed pairs, split pairs and miswiring
- Split pair detection:
- Min. 1.2m (about 4 Feet)
- Max. 150m (about 492 Feet)
- Identifies up to 4 different cables with provided remote identifiers (256450)
- Large alphanumeric LED clearly displays fault status
- Includes carrying pouch with belt loop
Specifications:
- Power Source: (one) DC 9V battery
- Power Consumption: 30mA
- Operating Temp: 0~50 degrees C
- Storage Temp: -10~60 degrees C
- Humidity: 0 to 95%(non-condensing)
- Dimensions:
- Base 115mm x 76mm x 36mm
- Remote 68mm x 32mm x 25
- Safety Approval: CE
- Approx. Weight: 260g(Kit) / 35g(Remote)

The NETest-E is designed to provide quick and clear results for testing network cable continuity and wiring configuration. It will detect the most common wiring faults on TIA568A/568B, Token Ring, 10BASE-T, and 10/100BASE-T twisted-pair cables. The faults detected by the NETest-E include shorts, miswiring, reversed pairs, and shielding faults on UTP or STP cables. Just plug a cable into the Main and Remote units and the NETest-E will begin testing automatically.

NETfinder is the newest generation of the LANTest family, with an advance circuit design surpassing the original technology. NETfinder is a perfect companion to network professionals and students, for commercial and residential applications. NETfinder is designed to enhance users’ ability to quickly locate and verify the status of common and standard voice and data cables. It combines the functions of a convenient cable tester with a built-in low emission frequency "TONE" generator.
Features:
- Tests for wiring faults of open, short, reversed and crossed
- Verification of shield integrity
- Specially designed remote unit that enables one person to test installed cables
- Built-in Portfinder function to trace ports back to switch
- Easy to read fault display and high speed testing
- Low battery indicator
- Tone Generator Features
Specifications:
- Power Source: (one) DC 9V battery
- Power Consumption: 22mA
- Operating Temperature: 0~50 C
- Storage Temperature: -10~60 C
- Humidity: 0 to 95%(non-condensing)
- Dimensions:
- Main Unit: 104mm x 63mm x 29mm
- Remote: 104mm x 30.5mm x 29mm
- Safety Approve: CE
- Approx. Weight: 195g(Kit) / 45g(Remote)

NETfinder Pro is an expanded version of NETfinder. This Pro version adds the Cable Organizer function to allow it to work with up to 18 remote ID’s, which means it can identify hub/switch ports at the closet level, and to match cables at up to 18 different locations. The Cable Organizer function enables identification of a larger number of mislabeled cables quickly and effortlessly.
Features:
- 18 remote units for larger installation
- Compact in size so everything fits into one pouch
- Tests for wiring faults of open, short, reversed and crossed pairs
- Verification of shield integrity
- Specially designed remote unit that enables one person to test installed cables
- Built-in Portfinder function to trace ports back to switch
- Easy to read fault display and high speed testing
- Low battery indicator
- Tone Generator Features
Specifications:
- Power Source: DC 9V battery
- Power Consumption: 22mA
- Operating Temp: 0~50C
- Storage Temp: -10~60C
- Humidity: 0 to 95%(non-condensing)
- Dimensions:
- Main Unit: 104mm x 63mm x 29mm
- Remote: 104mm x 30.5mm x 29mm
- Additional Remote: 15mmx15mmx45mm
- Safety Approve: CE
- Approx. Weight: 159g(Kit) / 45g(Remote)/10g(Organizer)

The NETmapper is a hand-held multifunctional network-testing device that supports On-Line and Off-line tests. It operates ping network device with the IP address for the On-Line test and it functions as a cable checker for the Off-Line test.
Features:
- On-Line test; Displays the Ethernet port status, Ping default router, Ping DNS Server and Ping user defined device. etc.
- Off-Line test; Wire map test. Twisted mapping test, cable length test, Tone generator and port finder.
- Wire map for open, short. reversed, cross, split, mis-wire, and shield continuity
- Wire map result are displayed in a pin-to-pin format
- Indicates the serial number of remote for identification in a wire map
- One RJ45 ports on main unit for cable map test without remote
- Measures twisted pair length (Cat5, Cat5E, and Cat6) without remotes
- With self-calibrating ability for non-standard cables (length test) for an increase in measuring accuracy
- Use both measurements (meter and feet) standards for cable length display
- Incorporates Port Finder function: locates corresponding socket on hub/switch
- The Tone Generator sends 1K Hz tone on all pins with 4 special tonalities
- Large LCD display
- Battery powered, with low battery indicator
- Comes with 4 remotes

Designed to quickly test the most popular network cables that use twisted pair, such as 258A eight-wire system specified by AT&T;, or 10 BASE-T Ethernet Standard. By a simple push of a button, it will show cable continuity status. Also equipped with a set of dip switch and jumpers that allow the testing of pin-out status and to perform rewiring.
Specifications:
- Power Source: (One) DC 9V battery
- Power Consumption: 9mA
- Operating Temp: 0~50 degrees C
- Storage Temp: -10~60 degrees C
- Humidity: 0 to 95%(non-condensing)
- Dimension: 104mm x 63mm x 29mm
- Safety Approval: CE
- Approx. Weight: 102g

Designed to quickly test the most popular network cables that use twisted pair, such as 258A eight-wire system specified by AT&T;, or 10 BASE-T Ethernet Standard. By a simple push of a button, it will show cable continuity status. Also equipped with a set of dip switch and jumpers that allow the testing of pin-out status and to perform rewiring.
Specifications:
- Power Source: (One) DC 9V battery
- Power Consumption: 9mA
- Operating Temp: 0~50 degrees C
- Storage Temp: -10~60 degrees C
- Humidity: 0 to 95%(non-condensing)
- Dimension: 104mm x 63mm x 29mm
- Safety Approval: CE
- RoHs compliant

Designed with a compact remote terminator that slides into the master unit casing. Quickly test network cables such as TIA568A/568B, Token Ring and 10/100Base-T cables for continuity, shorts and open wires.
Features:
- High speed testing of UTP/STP and coaxial cables
- Verifies adherence to 10BASE-2, 10BASE-T, 100BASE-T, TIA-568A, TIA-568B and Token Ring wiring standards
- Verifies shield integrity
- Plug-and-test capabilities (no on/off switch)
- Piggy-back remote terminator design
- Includes storage pouch
Specifications:
- Power Source: (One) DC 9V battery
- Power Consumption: 27mA
- Operating Temp: 0~50 degrees C
- Storage Temp: -10~60 degrees C
- Humidity: 0 to 95%(non-condensing)
- Dimensions:
- Main: 80mm x 60mm x 31mm
- Remote: 49mm x 60mm x 31mm
- Safety Approval: CE
- Approx. Weight: 90g(Kit) / 35g(Remote)

The unique LED display clearly determines wiring status by providing a point-to-point pin-out of the actual wiring configuration. Quickly and simply diagnose the existence of open wires, shorted wires, crossed wires and miswiring. It is an essential tool for cable dealers, cable assembly houses or system integrators to quickly troubleshoot PC data cables-where most data transmission problems occur. The Pro ATA version is an advanced version of the original PC Cable Tester, which supports a Serial ATA / High Speed Serialized AT Attachment.
Features:
- Uses wire mapping display to test the most commonly used PC Data Cables (even USB and Firewire on Pro version) for actual pin configurations
- Detects open wires, shorts and miswiring
- LED glow enhanced for printer cable test
- Automatic or manual scanning
- Hand-held, light weight and totally portable
- DC battery compartment and AC power jack
Additional Port Information:
- 258981 - PC Cable Tester (Standard)
- 258991 - PC Cable Tester Pro (+ Firewire and USB)
- 258991A - PC Cable Tester Pro ATA (+ Serial ATA)

The unique LED display clearly determines wiring status by providing a point-to-point pin-out of the actual wiring configuration. Quickly and simply diagnose the existence of open wires, shorted wires, crossed wires and miswiring. It is an essential tool for cable dealers, cable assembly houses or system integrators to quickly troubleshoot PC data cables-where most data transmission problems occur. The Pro ATA version is an advanced version of the original PC Cable Tester, which supports a Serial ATA / High Speed Serialized AT Attachment.
Cable Tester Features:
- RoHS compliant
- Uses wire mapping display to test the most commonly used PC Data Cables (even USB and Firewire on Pro version) for actual pin configurations
- Detects open wires, shorts and miswiring
- LED glow enhanced for printer cable test
- Automatic or manual scanning
- Hand-held, light weight and totally portable
- DC battery compartment and AC power jack
Additional Port Information:
- 258981 - PC Cable Tester (Standard)
- 258991 - PC Cable Tester Pro (+ Firewire and USB)
- 258991A - PC Cable Tester Pro ATA (+ Serial ATA)

Power Over Ethernet Status Finder - POE Finder technology is increasingly being used in many network equipments such as: IP phone, Access Points, Network Hubs, Network Cameras, and other types of equipment.
POE Finder Features:
- The POE Finder is a new and easy to use tool for professional network administrators and installers in identifying the existence of PoE in seconds
- Simply connect the PoE Finder to an active network and the Finder will "light up" when it detects the voltage from
the existing network
- It will identify the type of PSE (Power Sourcing Equipment) simultaneously - whether the POE voltage is detected on the pair 12-36 (EndSpan), or on the 45-78 (Midspan)
- Compliant with IEEE802.3af Standard
- Compact design, easy to plug and read
- The POE Finder is designed with both jack and plug, so no extra cable is needed
- Easy to read with indicators on both sides
- Indicators: Two LEDs indicate the POE Voltage (48V) is detected on pair 12-36 or 45-78
- Connectors: 8 Pin Modular Jack and Plug
- Voltage detected: IEEE802.3af Standard, and unsolicited voltage > 24 VDC on pair 12-36, or 45-78
- Voltage protection: 63 V DC

The Ribbon Cable Tester is designed to test the most commonly used flat IDE cables for wiring continuity, opens, shorts and miswiring. An intelligent CPU will memorize the correct wiring configuration for an IDE cable, thus enabling mass production cable assemblies to test one cable after another for pass or fail status. It is an excellent tester for system integrators to perform inexpensive tests on internal PC cables, or for cable assembly houses on a budget. The LCD wire-mapping display with a backlight provides unmistakable results.
Features:
- Tests actual pin configuration of IDE Ribbon cables using LCD wire mapping display
- An intelligent CPU will memorize a standard wiring configuration for pass/fail testing of numerous cables
- Detects open wires, shorted wires and miswiring
- A back-lighted liquid crystal display enables you to easily read the tested results in any working environment
- With optional PC Cable Test Interface Unit, can be expanded to test the most commonly used PC data cables including multimedia cables, laptop PC cables, Ethernet cables, modular cables and even USB cables
- Includes storage pouch

The Ribbon Cable Tester is designed to test the most commonly used flat IDE cables for wiring continuity, opens, shorts and miswiring. An intelligent CPU will memorize the correct wiring configuration for an IDE cable, thus enabling mass production cable assemblies to test one cable after another for pass or fail status. It is an excellent tester for system integrators to perform inexpensive tests on internal PC cables, or for cable assembly houses on a budget. The LCD wire-mapping display with a backlight provides unmistakable results.
Cable Tester Features:
- RoHS compliant
- Tests actual pin configuration of IDE Ribbon cables using LCD wire mapping display
- An intelligent CPU will memorize a standard wiring configuration for pass/fail testing of numerous cables
- Detects open wires, shorted wires and miswiring
- A back-lighted liquid crystal display enables you to easily read the tested results in any working environment
- With optional PC Cable Test Interface Unit, can be expanded to test the most commonly used PC data cables including multimedia cables, laptop PC cables, Ethernet cables, modular cables and even USB cables
- Includes storage pouch

SOHOtest-E is designed to test the most commonly used cables in a residential/home office environment. It can be used to determine wiring faults in network, phone, cable TV, and home security system cables, either before or after installation. The SOHOtest-E is so easy to use, even novice home network users can save hundreds of dollars by determining cabling faults before calling for professional repairs
Features:
- Pass/fail coaxial test
- Remote unit for one-person testing
- Compact and light-weight design for easy storage

Test-i Multi-Function PC Cable Tester is specially designed multi-function cable tester that tests and analyzes a comprehensive range of PC connector types and the most commonly used flat cables.
Features:
- Identify open wires, short wires, crosswires, and misswires connectivity
- Support 18 flat types of PC connectors
- 100 test results can be saved and transferred to PC via USB line
- Alphanumeric LCD display with black light
- Low battery indicator
- Connectors: IDC40, IDC34, DVI29, HDB15M/F, DB9M/F, COAX, BNC, RJ11, RJ45, 1394-6P, 1394-4P, SATA, USB(A/B), HDMI, RCA
- Control Switch- Power, UP, DOWN, DELETE, SAVE, CANCEL, ENTER
- Display- LCD size, 2 rows of 16 characters, and black light
- Power- DC 9V battery compartment, DC9V 150mA power jack (adapter not included)
- Emission- CE, RoHS compliant

Used to test for continuity, crossed tip and ring, individual pair reversals and opens in 1, 2, 3, and 4-pair terminated cable. Cables are simply plugged into the appropriate jacks and the LEDs observed. Can be used to test either local or remote locations as well as line cords.

This is the most advanced intsrument in the wavetek family of lan cable testers.
Features:
- Tests up to 300 MHz exceeding the requirement for emerging CAT 6/Class E standards
- ETL Certified Level III Accuracy
- Performs all advanced Power Sum measurements up to 300 MHz
- Built in TDR capability
- Options for Singlemode and Multimode fiber optic testing
- LT-Record Manager software supports all record keeping, reporting and certification requirements

VDV PRO Cable Tester with Eight Remote and Terminator is an easy-to-use cable testing and verification device that can quickly test all wiring requirements found throughout residential and commercial environments.
Cable Tester Features:
- Specifically designed for Voice, Data and Video applications
- Supports RJ-11/12, RJ-45, Coax F, BNC and RCA connectors
- Functionality for Measuring Cable Length
- Wide, Bright Backlit screen
- Easy-to-read Pass/Fail results
- Displays wire errors including: Open, Short, Miswire and Split Pair and Length
- Multi-tone support for cable tracing and fault isolation
- Blink network link LED for visual cable tracing
- NEW Integrated coax - F-connection

VDV PRO Cable Tester with One Remote and Terminator is an easy-to-use cable testing and verification device that can quickly test all wiring requirements found throughout residential and commercial environments.
Cable Tester Features:
- Specifically designed for Voice, Data and Video applications
- Supports RJ-11/12, RJ-45, Coax F, BNC and RCA connectors
- Functionality for Measuring Cable Length
- Wide, Bright Backlit screen
- Easy-to-read Pass/Fail results
- Displays wire errors including: Open, Short, Miswire and Split Pair and Length
- Multi-tone support for cable tracing and fault isolation
- Blink network link LED for visual cable tracing
- NEW Integrated coax - F-connection

VDV PRO Cable Tester with One Remote and Probe is an easy-to-use cable testing and verification device that can quickly test all wiring requirements found throughout residential and commercial environments.
Cable Tester Features:
- Specifically designed for Voice, Data and Video applications
- Supports RJ-11/12, RJ-45, Coax F, BNC and RCA connectors
- Functionality for Measuring Cable Length
- Wide, Bright Backlit screen
- Easy-to-read Pass/Fail results
- Displays wire errors including: Open, Short, Miswire and Split Pair and Length
- Multi-tone support for cable tracing and fault isolation
- Blink network link LED for visual cable tracing
- NEW Integrated coax - F-connection