The shear action disc design of the E25S valve provides precise controlled mixing of steam and water. Fitted with the electronic actuator and an integrated temperature sensor, the system ensures fast, accurate and stable temperature control. The single compact assembly simplifies installation. The independence of this stand-alone unit provides a reliable solution for hot water supply for industrial applications.

The calibrated temperature probe fits into a 1/8” NPSM port in the outlet, and connects via a cable to the actuator. With this temperature feedback signal, the actuator can provide temperature control accuracy of ±1°F (±0.5°C) and up to 200°F (95°C) heated water at the outlet.

The E25S can handle a variety of input temperatures and pressures to give a temperature rise. With sudden changes of inlet pressure and temperature to the valve, the controller aggressively minimizes outlet temperature variations.

Valve Features

• ISO 5211, 5210 actuator flange mounting
• Nickel chrome and cobalt coated CF8M (316) stainless steel discs
• 1” valve flow coefficient Cv(max): 8.0
• Valve constructed of CF8M (316) stainless steel
• End connection: 1” NPT inlets and 1-1/4” NPT outlet
• Top entry allows inline access to internal valve parts
• Maximum inlet steam temperature 482°F (250°C)
• Rated pressure: 145 psi (10 bar)
• Seat leakage is approximately 0.05% of the valves Cv(max)
• Design verification to ASME B16.34
• U.S. patent approved

Electronic Actuator Features

• Analog (4-20mA) input and output control signals for interfacing with SCADA control
• Software configurable control settings
• Very high resolution capability (0.03° rotational)
• External RS232 connection (cable supplied)
• Stand-alone closed loop temperature control, or remote analog (4-20mA) control options
• Power: regulated 24Vdc 3.5 Amp supply required
• Fail-safe position feedback (non-contact absolute encoder)
• Keypad: 4 membrane switches with “dual touch” safety features
• Display: 3.5 digit LCD display with back light
• Push-button power switch
• Extra analog input for interfacing ancillary devices (e.g., flow switch, level switch)
• 90° stroke time as low as 1.5 seconds for fast control action
• Gearbox: planetary, lifetime lubrication, low backlash
• 100% duty cycle rated actuator

The shear action disc design of the E40S valve provides precise controlled mixing of steam and water. Fitted with the electronic actuator and an integrated temperature sensor, the system ensures fast, accurate and stable temperature control. The single compact assembly simplifies installation. The independence of this stand-alone unit provides a reliable solution for hot water supply for industrial applications.

The calibrated temperature probe fits into a 1/8” NPSM port in the outlet, and connects via a cable to the actuator. With this temperature feedback signal, the actuator can provide temperature control accuracy of ±1°F (±0.5°C) and up to 200°F (95°C) heated water at the outlet.

The E40S can handle a variety of input temperatures and pressures to give a temperature rise. With sudden changes of inlet pressure and temperature to the valve, the controller aggressively minimizes outlet temperature variations.

Valve Features

• ISO 5211, 5210 actuator flange mounting
• Nickel chrome and cobalt coated CF8M (316) stainless steel discs
• 1” valve flow coefficient Cv(max): 13.3
• Valve constructed of CF8M (316) stainless steel
• End connection: 1-1/2” NPT inlets and 1-1/2” NPT outlet
• Top entry allows inline access to internal valve parts
• Maximum inlet steam temperature 482°F (250°C)
• Rated pressure: 145 psi (10 bar)
• Seat leakage is approximately 0.05% of the valves Cv(max)
• Design verification to ASME B16.34
• U.S. patent approved

The shear action disc design of the E50S valve provides precise controlled mixing of steam and water. Fitted with the electronic actuator and an integrated temperature sensor, the system ensures fast, accurate and stable temperature control. The single compact assembly simplifies installation. The independence of this standalone unit provides a reliable solution for hot water supply for industrial applications.

The calibrated temperature probe fits into a 1/8” NPSM port in the outlet, and connects via a cable to the actuator. With this temperature feedback signal, the actuator can provide temperature control accuracy of ±1°F (±0.5°C) and up to 200°F (95°C) heated water at the outlet.

The E50S can handle a variety of input temperatures and pressures to give a temperature rise. With sudden changes of inlet pressure and temperature to the valve, the controller aggressively minimizes outlet temperature variations.

Valve Features

• ISO 5211, 5210 actuator flange mounting
• Nickel chrome and cobalt coated CF8M (316) stainless steel discs
• 2” valve flow coefficient Cv(max): 26.6
• Valve constructed of CF8M (316) stainless steel
• End connection: 2” NPT inlets and 2-1/2” NPT outlet
• Top entry allows inline access to internal valve parts
• Maximum inlet steam temperature 482°F (250°C)
• Rated pressure: 145 psi (10 bar)
• Seat leakage is approximately 0.05% of the valves Cv(max)
• Design verification to ASME B16.34
• U.S. patent approved

Electronic Actuator Features

• Analog (4-20mA) input and output control signals for interfacing with SCADA control
• Software configurable control settings
• Very high resolution capability (0.03° rotational)
• External RS232 connection (cable supplied)
• Stand-alone closed loop temperature control, or remote analog (4-20mA) control options
• Power: regulated 24Vdc 5 Amp supply required
• Fail-safe position feedback (non-contact absolute encoder)
• Keypad: 4 membrane switches with “dual touch” safety features
• Display: 3.5 digit LCD display with back light
• Push-button power switch
• Extra analog input for interfacing ancillary devices (e.g., flow switch, level switch)
• 90° stroke time as low as 1.5 seconds for fast control action
• Gearbox: planetary, lifetime lubrication, low backlash
• 100% duty cycle rated actuator

The GP-2000R is a high-performance externally piloted throttling back-pressure valve for large capacity applications. Typical applications would include systems using flash steam for low-pressure heating or processes. The GP-2000R valve will function to maintain a constant upstream pressure. This valve is not a safety valve and should not be used for that purpose.

When accurate control is desired from your steam or water applications, the Armstrong Python^® 1100 Series Control Valve will squeeze every bit of performance out of your system and deliver precise control. With a wide range of materials, s

When accurate control is desired from your steam or water applications, the Armstrong Python^® 1100 Series Control Valve will squeeze every bit of performance out of your system and deliver precise control. With a wide range of materials, s

Armstrong’s OB-2000 is a high-performance externally piloted temperature regulator for large-capacity applications such as heat exchangers, steam coils, steam dryers, plating tanks and parts washers. Self-actuated and requiring no external energy source, the OB-2000 comes with main valve, pilot valve and tubing kit. Capillary units mount in any position and can be easily disconnected and interchanged, offering easy installation and maximum application flexibility. The OB-2000 is available in sizes 1/2" through 4" (15–100 mm), with six temperature ranges and three capillary lengths.

Armstrong’s OB-2000L is a high-performance externally piloted temperature regulator for large-capacity, low pressure applications. Self-actuated and requiring no external energy source, the OB-2000 comes with main valve, pilot valve and tubing kit. Capillary units mount in any position and can be easily disconnected and interchanged, offering easy installation and maximum application flexibility. The OB-2000L is available in sizes 1/2" through 4" (15–100 mm), with six temperature ranges and three capillary lengths.

Armstrong’s OB-2000 is a high-performance externally piloted temperature regulator for large-capacity applications such as heat exchangers, steam coils, steam dryers, plating tanks and parts washers. Self-actuated and requiring no external energy source, the OB-2000 comes with main valve, pilot valve and tubing kit. Capillary units mount in any position and can be easily disconnected and interchanged, offering easy installation and maximum application flexibility. The OB-2000 is available in sizes 1/2" through 4" (15–100 mm), with six temperature ranges and three capillary lengths.

The Armstrong OB-30/31 is a direct-acting temperature regulator that requires no external source for operation. Simple and compact, the unit is suitable for a wide variety of heating/cooling applications. Installing, adjusting or maintaining the OB-30/31 is quick and easy, because interchangeable capillaries mount in any position and disconnect by simply loosening the union nut. No stem packing, so there’s no leakage. Single composition seat for tight shutoff. The OB-30/31 comes in 1/2", 3/4" or 1" (15–25 mm) sizes and is available with a choice of five temperature ranges and three capillary lengths.

The Armstrong OB-30/31 is a direct-acting temperature regulator that requires no external source for operation. Simple and compact, the unit is suitable for a wide variety of heating/cooling applications. Installing, adjusting or maintaining the OB-30/31 is quick and easy, because interchangeable capillaries mount in any position and disconnect by simply loosening the union nut. No stem packing, so there’s no leakage. Single composition seat for tight shutoff. The OB-30/31 comes in 1/2", 3/4" or 1" (15–25 mm) sizes and is available with a choice of five temperature ranges and three capillary lengths.

The GD-2000K is an ideal choice when set-point changes are frequent, access to the valve is difficult and steam quality is poor. The GD-2000K comes with either NPT or flanged connections for quick, easy installation. It also comes with a durable ductile iron body and features double stainless steel diaphragms and hardened stainless working parts, renewable in-line. High C_v and 10:1 turndown ratio. Single-seated for dead-end service.

The GD-30 is a compact, high-performance direct-acting valve. Economical to buy and use, it is ideal for those low- to moderate-flow applications where accuracy of +/- 10% is acceptable. The GD-30 is well suited for laundry and dry-cleaning equipment, hospital equipment, tire molds, humidifiers, small heaters and applications in food processing. It provides tight shutoff for dead-end service on steam.

The GD-30 is a compact, high-performance direct-acting valve. Economical to buy and use, it is ideal for those low- to moderate-flow applications where accuracy of +/- 10% is acceptable. The GD-30 is well suited for laundry and dry-cleaning equipment, hospital equipment, tire molds, humidifiers, small heaters and applications in food processing. It provides tight shutoff for dead-end service on steam.

The GD-45 is a compact, high-performance direct-acting valve. Inexpensive to buy and use, it is ideal for those moderate-flow applications that do not justify the higher cost of pilot-controlled valves. The GD-45 is well suited for laundry and dry-cleaning equipment, hospital equipment, tire molds, humidifiers, small heaters and applications in food processing.

Quick, easy installation

• Lightweight and compact
• Constructed of ductile iron for greater durability and higher inlet pressure
• Screwed connections
• No external sensing lines or parts required
• Maximum turndown ratio 10:1
• ANSI Class IV

Simple selection

• 1/2", 3/4" and 1" (15, 20 and 25 mm) sizes
• Match pipe size normally
• Three pressure-range springs (Use smaller range spring for best control when ranges overlap.)

Long life and easy maintenance

• Highly resilient phosphor-bronze bellows-style diaphragm
• Hardened stainless steel working parts
• Integral strainer (removable for cleaning) for protection from wear or dirt
• Teflon gaskets used at all joints for improved leakage prevention

The GD-6N and GD-6 are compact, direct-acting diaphragm valves ideal for low-flow applications, including laundry/dry-cleaning equipment, hospital equipment, tire/plastic molds and food processing. Lightweight and compact, the valves require no external sensing lines or additional parts. An external adjusting screw with locking nut and cover make for quick, easy setting and adjustment. The valves provide tight shutoff for dead-end service. Valves include removable stainless steel diaphragm, hardened stainless steel working parts (6N), integral removable strainer (6N) and in-line renewable valve and seat. The GD-6N and GD-6 are available in 3/8", 1/2" and 1" (10, 20 and 25 mm) sizes, with a choice of two set pressure-range springs.

The GP-1000 Series valves are pilot-controlled for accurate regulation of pressure under widely ranging flow. The internal-pilot design eliminates external components and piping.

Internally piloted GP Series valves are capable of larger capacity and greater accuracy than direct-acting valves. Internally piloted GP Series valves are rated for dead-end service and have a 20:1 turn down ratio and an accuracy of +/-5% of set point.

Completely supported by piping, lightweight GP Series valves install easily with NPT or flanged connections. A stainless steel diaphragm, hardened stainless steel working parts and integral removable strainer team up to provide higher performance over a long, trouble-free service life.

Valves are equipped with a caged main valve assembly (separate shutoff surfaces and flow-control ports), piston valve rings for longer life, and an external adjusting screw with locking nut and cover. All working parts are renewable in-line. For air service, a Teflon^®; seat ensures tight shutoff.

The GP-1000 Series valves are pilot-controlled for accurate regulation of pressure under widely ranging flow. The internal-pilot design eliminates external components and piping.

Internally piloted GP Series valves are capable of larger capacity and greater accuracy than direct-acting valves. Internally piloted GP Series valves are rated for dead-end service and have a 20:1 turn down ratio and an accuracy of +/-5% of set point.

Completely supported by piping, lightweight GP Series valves install easily with NPT or flanged connections. A stainless steel diaphragm, hardened stainless steel working parts and integral removable strainer team up to provide higher performance over a long, trouble-free service life.

Valves are equipped with a caged main valve assembly (separate shutoff surfaces and flow-control ports), piston valve rings for longer life, and an external adjusting screw with locking nut and cover. All working parts are renewable in-line. For air service, a Teflon^®; seat ensures tight shutoff.

The GP-1000 Series valves are pilot-controlled for accurate regulation of pressure under widely ranging flow. The internal-pilot design eliminates external components and piping.

Internally piloted GP Series valves are capable of larger capacity and greater accuracy than direct-acting valves. Internally piloted GP Series valves are rated for dead-end service and have a 20:1 turn down ratio and an accuracy of +/-5% of set point.

Completely supported by piping, lightweight GP Series valves install easily with NPT or flanged connections. A stainless steel diaphragm, hardened stainless steel working parts and integral removable strainer team up to provide higher performance over a long, trouble-free service life.

Valves are equipped with a caged main valve assembly (separate shutoff surfaces and flow-control ports), piston valve rings for longer life, and an external adjusting screw with locking nut and cover. All working parts are renewable in-line. For air service, a Teflon^®; seat ensures tight shutoff.

The GP-1000 Series valves are pilot-controlled for accurate regulation of pressure under widely ranging flow. The internal-pilot design eliminates external components and piping.

Internally piloted GP Series valves are capable of larger capacity and greater accuracy than direct-acting valves. Internally piloted GP Series valves are rated for dead-end service and have a 20:1 turn down ratio and an accuracy of +/-5% of set point.

Completely supported by piping, lightweight GP Series valves install easily with NPT or flanged connections. A stainless steel diaphragm, hardened stainless steel working parts and integral removable strainer team up to provide higher performance over a long, trouble-free service life.

Valves are equipped with a caged main valve assembly (separate shutoff surfaces and flow-control ports), piston valve rings for longer life, and an external adjusting screw with locking nut and cover. All working parts are renewable in-line. For air service, a Teflon^®; seat ensures tight shutoff.

The GP-2000 is a high-performance, externally piloted reducing valve for large-capacity requirements. Typical use is on intermittent service, including applications such as heat exchangers, steam coils, rotating dryers, process equipment and heating systems. With a 20:1 rangeability and high C_v, the GP-2000 is reliable and accurate (+/-1% of pressure set point from 5% to 100% of flow) over a long, trouble-free service life. Hardened stainless steel working parts are renewable in-line. The GP-2000 is single-seated for dead-end service, and it is available with both NPT (1/2"–2") (15–50 mm) and flanged connections in 2"–6" sizes (50–150 mm).

The GP-2000CS is a high-performance, externally piloted reducing valve for large-capacity requirements. Typical use is on intermittent service, including applications such as heat exchangers, steam coils, rotating dryers, process equipment and heating systems. With a 20:1 rangeability and high Cv, the GP-2000CS is reliable and accurate (+/-1% of pressure set point from 5% to 100% of flow) over a long, trouble-free service life. Stellited stainless steel working parts are renewable in-line. The GP-2000CS is single-seated for dead-end service, and it is available with both NPT (1/2"-2") (15-50 mm) and flanged connections in 2"-4" sizes (50-100 mm).

A high-performance externally air-piloted pressure-reducing valve, the GP-2000K-1/GP-2000K-3/GP-20000K-6 is an ideal choice when set-point changes are frequent and access to the PRV is difficult. The valve comes totally assembled and requires no field installation except downstream sensing line and air connection.

High C_v, 20:1 turndown ratio and accurate control +/-1% of pressure set point from 5% to 100% of flow. A rugged ductile iron body, hardened stainless steel working parts, double stainless steel diaphragms and in-line repairability add up to reliability on the job. Single-seated for dead-end service.

A high-performance externally air-piloted pressure-reducing valve, the GP-2000K-1/GP-2000K-3/GP-20000K-6 is an ideal choice when set-point changes are frequent and access to the PRV is difficult. The valve comes totally assembled and requires no field installation except downstream sensing line and air connection.

High C_v, 20:1 turndown ratio and accurate control +/-1% of pressure set point from 5% to 100% of flow. A rugged ductile iron body, hardened stainless steel working parts, double stainless steel diaphragms and in-line repairability add up to reliability on the job. Single-seated for dead-end service.

A high-performance externally air-piloted pressure-reducing valve, the GP-2000K-1/GP-2000K-3/GP-20000K-6 is an ideal choice when set-point changes are frequent and access to the PRV is difficult. The valve comes totally assembled and requires no field installation except downstream sensing line and air connection.

High C_v, 20:1 turndown ratio and accurate control +/-1% of pressure set point from 5% to 100% of flow. A rugged ductile iron body, hardened stainless steel working parts, double stainless steel diaphragms and in-line repairability add up to reliability on the job. Single-seated for dead-end service.

The GP-2000L is a high-performance, externally piloted reducing valve for large-capacity and low inlet pressure requirements. The GP-2000L is reliable and accurate (+/-1% of pressure set point from 5% to 100% of flow) over a long, trouble-free service life. Hardened stainless steel working parts are renewable in-line. The GP-2000L is single-seated for dead-end service, and it is available with both NPT (1/2"–2") (15–50 mm) and flanged connections in 2"–4" sizes (50–100 mm).

Armstrong offers a stainless steel sump ejector for use in draining unwanted water from steam pits, steam tunnels or enclosed spaces. The stainless steel sump ejector uses a snap-acting Inconel X-750 spring-assisted mechanism, which engages a steam motive valve, turning the pump on or off as the float rises and falls. The all-stainless steel design will ensure long life in the harsh environment of a steam pit.

Features

• All stainless steel construction and design guard against corrosion

• True steam-on, steam-off operation

• Heavy duty Inconel X-750 springs provide a long, troublefree

service life

• The small, compact and unique cast stainless steel design

is unlike anything on the market today

Armstrong offers a stainless steel sump ejector for use in draining unwanted water from steam pits, steam tunnels or enclosed spaces. The stainless steel sump ejector uses a snap-acting Inconel X-750 spring-assisted mechanism, which engages a steam motive valve, turning the pump on or off as the float rises and falls. The all-stainless steel design will ensure long life in the harsh environment of a steam pit.

Features

• All stainless steel construction and design guard against corrosion

• True steam-on, steam-off operation

• Heavy duty Inconel X-750 springs provide a long, troublefree

service life

• The small, compact and unique cast stainless steel design

is unlike anything on the market today

Armstrong Single Temperature Hose Stations

Model 1032

Armstrong Single Temperature Hose Stations offer a rugged, heavy duty, industrial grade all stainless steel option for point of use hose attachment and washdown.

Armstrong Single Temperature Hose Stations are ideal for installation in hot water systems which do not require a secondary point of use water temperature adjustment.

• Stainless Steel Construction.
• Stainless Steel Ball Valve Flow Control.
• Stainless Steel Hose Rack.
• Spray Nozzle.
• Washdown Hose.

Various hose lengths and spray nozzles are available as options for Armstrong Single Temperature Hose Stations.

Includes:

• Stainless steel full port 3/4" NPT (20 mm) ball valve
• Mounted on heavy-duty stainless steel hose rack with 8" x 12" (203 x 317 mm) mounting plate with four mounting holes
• Stainless steel hose strain relief
• 3/4" x 4" (20 mm x 101 mm) stainless steel nipple
• 3/4" (20 mm) stainless steel coupling at outlet

Armstrong Single Temperature Hose Stations

Armstrong Single Temperature Hose Stations offer a rugged, heavy duty, industrial grade all stainless steel option for point of use hose attachment and washdown.

Armstrong Single Temperature Hose Stations are supplied with a heavy duty washdown hose and a self closing industrial quality spray nozzle. They are ideal for installation in hot water systems which do not require a secondary point of use water temperature adjustment.

• Stainless Steel Construction.
• Stainless Steel Ball Valve Flow Control.
• Stainless Steel Hose Rack.
• Spray Nozzle
• Washdown Hose

Various hose lengths and spray nozzles are available as options for Armstrong Single Temperature Hose Stations.

Model 1033

Includes:

• Stainless steel full port 3/4" NPT (20 mm) ball valve
• Mounted on heavy-duty stainless steel hose rack with 8" x 12" (203 x 317 mm) mounting plate with four mounting holes
• Stainless steel hose strain relief
• 3/4" x 4" (20 mm x 101 mm) stainless steel nipple
• 3/4" (20 mm) stainless steel coupling at outlet
• Stainless steel 3" (76 mm) dial dual-scale thermometer (50˚-250˚F/10˚-121˚C)
• Armstrong specialty yellow abrasion-resistant 500 psi/190˚F (34 bar/87.7˚C)-rated washdown hose supplied in standard lengths of 25' and 50' (7.6 m or 15.2 m)
• 3/4" (20 mm) live male swivel and external spring guard at hose inlet and 1/2" (20 mm) live male swivel adaptor at outlet
• Custom hose lengths and a variety of colors available
• Self-closing rubber-cushioned Armstrong spray nozzle with stainless steel nozzle hook

STEAMIX 2030 comprises a STEAMIX Steam/Water Mixing
Valve of brass/stainless steel (SS) construction.
STEAMIX 2030 is a steam/water heater and is recommended
for use in various washing machines, vessel filling, container
“top off,” barrel washing and other similar applications.
STEAMIX 2030 is designed for a horizontal
(temperature control handle at top)
installation and is supplied as standard
with a SS wall mounting bracket.

STEAMIX 2030 comprises a STEAMIX Steam/Water Mixing
Valve of brass/stainless steel (SS) construction.
STEAMIX 2030 is a steam/water heater and is recommended
for use in various washing machines, vessel filling, container
“top off,” barrel washing and other similar applications.
STEAMIX 2030 is designed for a horizontal
(temperature control handle at top)
installation and is supplied as standard
with a SS wall mounting bracket.

Valve of brass/stainless steel (SS) construction.
STEAMIX 2031 is supplied as standard with integral inlet
supply risers comprising 3/4" Y-Type strainers and 3/4" ball valves
cross-linked by a SS bridge piece and lever for simultaneous
on/off control of both inlet supplies. Unit is supplied fully assembled
and pressure tested. Inlet check valves required.
STEAMIX 2031 is a steam/water heater and
is recommended for use in various vessel
filling, container “top off,” barrel washing
and other similar applications or for use as
a hose station when a hose reel is desired.

STEAMIX^® Steam and Water Hose Stations and Mixing Units

Model 2031P — Premium

STEAMIX^® Model 2031P is a steam/water mixing valve of brass/stainless steel construction. The valve is supplied as standard with integral inlet supply risers comprising 3/4" Y-type strainers and 3/4" ball valves cross-linked by a stainless steel bridge piece and lever for simultaneous on/off control of both inlet supplies. The unit is supplied fully assembled and pressure-tested. Stainless Steel dual scale top mount Thermometer and Inlet Check Valves Included.

STEAMIX^® Steam and Water Hose Stations and Mixing Units will not pass live steam.

Steamix mixing valve, featured on all Steamix steam and water hose stations by Armstrong, will not pass live steam in the event of either a significant pressure reduction or complete failure of the cold-water supply.

Steamix is designed to improve efficiency and reduce risk when mixing steam and water for washdown. When your process demands high washdown temperatures, adjusting the mix of steam and water becomes much more difficult and dangerous. With the older style dual-globe valve mixing “Y,” it is too easy to introduce too much steam—with risky consequences for your personnel. Here’s why it’s no problem with Steamix.

Safety

• In the event of either a complete failure of the inlet cold-water supply or a reduction in cold-water pressure to below 20 (+/-5) psi (1.4 bar), STEAMIX will respond with a complete shutdown of outlet flow.
• If there is a structural failure of the primary operating component (diaphragm), STEAMIX will “fail safe” to cold water.
• To prevent over-temperature selection by the user and the potential for overheated water and flash steam presentation common with other types of hose stations, STEAMIX is supplied with a single-temperature locking set.

Valve of brass/stainless steel (SS) construction.
STEAMIX 2031 is supplied as standard with integral inlet
supply risers comprising 3/4" Y-Type strainers and 3/4" ball valves
cross-linked by a SS bridge piece and lever for simultaneous
on/off control of both inlet supplies. Unit is supplied fully assembled
and pressure tested. Inlet check valves required.
STEAMIX 2031 is a steam/water heater and
is recommended for use in various vessel
filling, container “top off,” barrel washing
and other similar applications or for use as
a hose station when a hose reel is desired.

STEAMIX 2032 comprises a STEAMIX Steam/Water Mixing
Valve of brass/stainless steel (SS) construction with optional
nickel-plated finish (VES).
STEAMIX 2032 is supplied as standard
with integral inlet supply risers comprising
3/4" Y-Type strainers and 3/4" ball valves
cross-linked by a SS bridge piece and lever
for simultaneous on/off control of both inlet
supplies. Complete unit is supplied fully
assembled and pressure tested, installed on
a SS hose rack. Inlet check valves required.

STEAMIX^® Steam and Water Hose Stations and Mixing Units

Model 2032P — Premium

STEAMIX^® Model 2032P is a steam/water mixing valve of brass/stainless steel construction. The valve is supplied as standard with integral inlet supply risers comprising 3/4" Y-type strainers and 3/4" ball valves cross-linked by a stainless steel bridge piece and lever for simultaneous on/off control of both inlet supplies. The unit is supplied fully assembled, pressure-tested and installed on a stainless steel hose rack. Stainless Steel dual scale top mount Thermometer and Inlet Check Valves included.

STEAMIX^® Steam and Water Hose Stations and Mixing Units will not pass live steam.

Steamix mixing valve, featured on all Steamix steam and water hose stations by Armstrong, will not pass live steam in the event of either a significant pressure reduction or complete failure of the cold-water supply.

Steamix is designed to improve efficiency and reduce risk when mixing steam and water for washdown. When your process demands high washdown temperatures, adjusting the mix of steam and water becomes much more difficult and dangerous. With the older style dual-globe valve mixing “Y,” it is too easy to introduce too much steam—with risky consequences for your personnel. Here’s why it’s no problem with Steamix.

Safety

• In the event of either a complete failure of the inlet cold-water supply or a reduction in cold-water pressure to below 20 (+/-5) psi (1.4 bar), STEAMIX will respond with a complete shutdown of outlet flow.
• If there is a structural failure of the primary operating component (diaphragm), STEAMIX will “fail safe” to cold water.
• To prevent over-temperature selection by the user and the potential for overheated water and flash steam presentation common with other types of hose stations, STEAMIX is supplied with a single-temperature locking set.

STEAMIX 2032 comprises a STEAMIX Steam/Water Mixing
Valve of brass/stainless steel (SS) construction with optional
nickel-plated finish (VES).
STEAMIX 2032 is supplied as standard
with integral inlet supply risers comprising
3/4" Y-Type strainers and 3/4" ball valves
cross-linked by a SS bridge piece and lever
for simultaneous on/off control of both inlet
supplies. Complete unit is supplied fully
assembled and pressure tested, installed on
a SS hose rack. Inlet check valves required.

STEAMIX 2033 comprises a STEAMIX Steam/Water Mixing
Valve of brass/stainless steel (SS) construction.
STEAMIX 2033 is supplied as standard with integral inlet supply
risers comprising 3/4" Y-Type strainers and 3/4" ball valves
cross-linked by a SS bridge piece and lever for simultaneous
on/off control of both inlet supplies. Unit is supplied fully
assembled and pressure tested, installed on a SS Hose rack.
STEAMIX 2033 also includes SS dual scale
outlet thermometer, 25' of “Safety Yellow”
washdown hose rated for 400 psi (28 bar)
and 400°F (88°C), low heat transfer polymer
spray nozzle with trigger guard, swivel
adapter and SS nozzle hook. Inlet check
valves required.

STEAMIX^® Steam and Water Hose Stations and Mixing Units

Model 2033P — Premium

STEAMIX^® Model 2033P is a steam/water mixing valve of brass/stainless steel construction. The valve is supplied as standard with integral inlet supply risers comprising 3/4" Y-type strainers and 3/4" ball valves cross-linked by a stainless steel bridge piece and lever for simultaneous on/off control of both inlet supplies. The unit is supplied fully assembled, pressure-tested and installed on a stainless steel hose rack. Stainless Steel dual scale top mount Thermometer and Inlet Check Valves included.

STEAMIX Model 2033P includes 25 feet of “safety yellow” washdown hose rated, low-heat-transfer polymer spray nozzle with trigger guard, swivel adapter, a stainless steel nozzle hook.

STEAMIX^® Steam and Water Hose Stations and Mixing Units will not pass live steam.

Steamix mixing valve, featured on all Steamix steam and water hose stations by Armstrong, will not pass live steam in the event of either a significant pressure reduction or complete failure of the cold-water supply.

Steamix is designed to improve efficiency and reduce risk when mixing steam and water for washdown. When your process demands high washdown temperatures, adjusting the mix of steam and water becomes much more difficult and dangerous. With the older style dual-globe valve mixing “Y,” it is too easy to introduce too much steam—with risky consequences for your personnel. Here’s why it’s no problem with Steamix.

Safety

• In the event of either a complete failure of the inlet cold-water supply or a reduction in cold-water pressure to below 20 (+/-5) psi (1.4 bar), STEAMIX will respond with a complete shutdown of outlet flow.
• If there is a structural failure of the primary operating component (diaphragm), STEAMIX will “fail safe” to cold water.
• To prevent over-temperature selection by the user and the potential for overheated water and flash steam presentation common with other types of hose stations, STEAMIX is supplied with a single-temperature locking set.

STEAMIX 2033 comprises a STEAMIX Steam/Water Mixing
Valve of brass/stainless steel (SS) construction.
STEAMIX 2033 is supplied as standard with integral inlet supply
risers comprising 3/4" Y-Type strainers and 3/4" ball valves
cross-linked by a SS bridge piece and lever for simultaneous
on/off control of both inlet supplies. Unit is supplied fully
assembled and pressure tested, installed on a SS Hose rack.
STEAMIX 2033 also includes SS dual scale
outlet thermometer, 25' of “Safety Yellow”
washdown hose rated for 400 psi (28 bar)
and 400°F (88°C), low heat transfer polymer
spray nozzle with trigger guard, swivel
adapter and SS nozzle hook. Inlet check
valves required.

Armstrong’s thermostatic radiator valves are offered in straight, angle and reversed angle patterns. Thermostatic operators provide accurate and automatic control of space temperature. They are ideal for hot water and low pressure steam heated convectors, radiators, thermostatically controlled hydronic or low pressure heat exchangers. Five styles of thermostatic operators are available with liquid, liquid remote or low density wax sensors.