10/30 MS/s, 12-bit, 4-ch Simultaneous Analog Input PCI Card

• 4 single-ended analog input channels
• 12-bit A/D converter, with up to 30 MHz sampling rate
• Multiple A/D triggering modes
• Onboard FIFO memory 32,768 samples
• 4 A/D converters simultaneously sampling
• Programmable gain
• Programmable pacer/counter
• BoardID™ switch
• Universal PCI Bus (supports 3.3 V or 5 V PCI bus signals)

100 kS/s, 12-bit, 32-ch Isolated Analog Input Universal PCI Card

• 2,500 VDC isolation protection
• 32-ch single-ended or 16-ch differential or a combination of analog input
• 12-bit resolution for A/D conversion
• Programmable gain for each input channel
• Software, internal or external pacer sampling modes supported
• Onboard FIFO memory: 4,096 samples;
• Universal PCI bus
• BoardID™ switch

16-ch Isolated Digital Input and 16-ch Isolated Digital Output EtherCAT Remote I/O Module

• Suitable for EtherCAT networks
• 16-ch digital input and 16-ch digital output with 2,500 VDC isolation
• Wide input voltage range (10 ~ 30 VDC)
• Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch)
• Quick removable European type connector
• LED indicators for I/O status
• Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode
• Two Rotary switches for up to 256 slave IDs

16-ch Isolated Digital Input and 16-ch Isolated Digital Output EtherCAT Remote I/O Module

• Suitable for EtherCAT networks
• 16-ch digital input and 16-ch digital output with 2,500 VDC isolation
• Wide input voltage range (10 ~ 30 VDC)
• Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch)
• Quick removable European type connector
• LED indicators for I/O status
• Supports EtherCAT Distributed Clock (DC) mode and SyncManager mode
• Two Rotary switches for up to 256 SubDevice IDs

16DI Modbus RS-485 Remote I/O

• 16ch digital input
• Protocols:Modbus RTU,ASCII
• Watchdog timer to recover the system
• 2500VDC isolation protection

1MS/s, 16-bit, 32-ch Analog Input PCIE Card

• 32-ch single-ended or 16-ch differential or a combination of analog input
• 16-bit A/D converter, with up to 1MHz sampling rate
• Multi-card synchronization
• Current measurement (0-20mA or 4-20mA)
• Support digital and analog triggers
• Auto calibration

200kS/s, 16-bit, 8-ch Analog Input iDAQ Module

• Hot-swappable in iDAQ system
• Detachable Euro-type spring terminal connectors
• 8 x 16-bit analog input channels with 600VRMS isolation
• Supports voltage and current measurements
• Wide common-mode voltage range (±275 V)

4-ch Analog Input Module

• Accuracy: ±0.1% or better of FSR (Voltage) ±0.2% or better of FSR (Current)
• Resolution: 16-bit
• Voltage/Current: ±10V, ±2.5V, 0 ~ 20mA, Range 4 ~ 20mA
• Isolation Voltage: 2000 V DC
• Sampling rate: 10 sample/second (total)
• Burn-out detection: Yes (Current-only)
• Input Impedance: 0.1 MΩ
• Input Type: Voltage, Current
• Channels: 4, differential

500 kS/s, 12-bit, 32-ch Isolated Analog Input Universal PCI Card

• 2,500 VDC isolation protection
• 32-ch single-ended or 16-ch differential or a combination of analog input
• 12-bit resolution for A/D conversion
• Programmable gain for each input channel
• Software, internal or external pacer sampling modes supported
• Onboard FIFO memory: 1,024 samples
• Universal PCI bus
• BoardID™ switch

DIG 64I 24 VDC SINK

7RTD IoT Modbus Ethernet Remote I/O

• 8ch RTD
• Protocols: Modbus TCP, RESTful API, ASCII
• GCL to perform basic logic control rules
• Peer-to-Peer function to map I/O status
• Wiring burn-out detect function
• Isolation protection: 2000VDC
• Built-in web server

8-ch Digital Input Module

• Rated Input : >5mA @ 12 VDC
• Current : >10mA @ 24 VDC
• Input Filter : Programmable, Default 3ms
• Pulse Input Frequency : 150Hz
• Over Voltage Protection : +40 VDC
• -40 ~ 70°C operating temperature
• Supports Sink (Wet Contact) / Counter input type

USB Connection
The OM-DAQ-USB-2401 is a portable USB 2.0 full speed thermocouple/voltage input data acquisition module (fully compatible with both USB 1.1 and USB 2.0 ports) that can be used with either desktop or laptop PCs. This stand-alone module draws power from the USB port to operate and has 500V isolation to PC. An external power supply (optional) can be used. The compact, modular packaging ensures ease of use in a variety of applications. Units can be DIN rail or wall mounted with the included hardware or easily operated on a bench.

8AI IoT Modbus/SNMP/MQTT 2Ports Ethernet Remote I/O

• 8ch analog input(voltage or current)
• Protocols:MQTT(TLS),SNMP,Modbus TCP,RESTful,ASCII
• GCL to perform basic logic control rules
• Cloud access: Data update to Azure
• Auto-bypass function to ensure daisy-chain data transmission
• Peer-to-Peer function to map I/O status
• Built-in web server
• Watchdog timer to recover the system

8DI 2.4G WiFi IoT Wireless I/O with 1RS-485

• Supports IEEE 802.11 a/b/g/n (2.4GHz)
• Supported protocols: Modbus/TCP, TCP/IP, UDP, DHCP, HTTPs, MQTT
• Stores 10,000+ data points locally with SNTP/RTC time sync and WDT auto connection recovery
• Supports RESTful web API in JSON format for IoT integration
• With UDP-based AES-128 encrypted wireless P2P, abnormal inputs can automatically trigger up to 16 WISE modules in the field

The SNAP-AIMA-8 provides eight channels of -20 mA to +20 mA current input. The module does not supply loop excitation current. Although the eight channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

Compatibility: This module can be used only with SNAP PAC R-series controllers, SNAP PAC EB-series Ethernet brains, and SNAP PAC SB-series serial brains.

The SNAP-AIMA-4 provides four channels of -20 mA to +20 mA analog current input. The module does not supply loop excitation current. Although the four channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

The SNAP-AIMA provides two channels of -20 mA to +20 mA analog current input. The module does not supply loop excitation current. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.
For a similar module that provides two isolated channels, see SNAP-AIMA-i.
For a module that provides two isolated channels and supplies loop excitation, see SNAP-AIMA-iSRC.
For SNAP PAC brains and rack-mounted controllers, we also have a four-channel module, the SNAP-AIMA-4, and a 32-channel module, the SNAP-AIMA-32.

The SNAP-AIMA-32 provides 32 channels of -20 mA to +20 mA analog current input. The module does not supply loop excitation current. Although the 32 channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

The SNAP-AIMV-4 provides four channels of analog-to-digital conversion. Each channel can be configured for -150 mV DC to +150 mV DC or -75 mV DC to +75 mV DC. This module can be used with SNAP PAC brains and R-series controllers. It can also be used with legacy Ethernet-based brains.
Although the four channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices

The SNAP-AITM-8 provides eight channels of thermocouple or millivolt input. Each channel can be individually configured to accept a type B, C, D, E, G, J, K, N, R, S, or T thermocouple or a -75 to + 75 mV, -50 to +50 mV, or -25 to +25 mV input.
Used with an Opto 22 SNAP PAC controller, the SNAP-AITM-8 module is ideal for customers with applications requiring high-resolution temperature monitoring, data acquisition, and control of autoclaves, industrial ovens, pasteurizers, heat exchangers, and other equipment that requires precise thermal regulation. The high density of points on the module reduces panel space for applications using a high number of thermocouple inputs, such as semiconductor, food, petrochemical, and pharmaceutical processing.
Compatibility: The SNAP-AITM-8 works with SNAP PAC brains and R-series controllers only. Like all SNAP analog input modules, the SNAP-AITM-8 provides transformer isolation to reduce noise and installation problems, and 4000 volts optical isolation (4000 volts of transient protection for 1 ms) from other modules on the same mounting rack.

The SNAP-AIV-8 provides eight channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or -5 to +5 VDC operation. Although the eight channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

Compatibility: This module can be used only with SNAP PAC controllers and brains.

ANA 8 U/I IN ISOLATED FAST

INPUT MODULE 4 ANALOG 24V

The SNAP-AITM provides two channels of analog-to-digital conversion. Each channel can be configured for -150 to +150 mV DC or -75 to +75 mV DC, or for type E, J, or K thermocouple operation. Use isolated probes for thermocouple inputs.
Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

The SNAP-AIV-32 analog input module provides 32 channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or -5 to +5 VDC operation. Although the 32 channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

Compatibility: This module can be used only with SNAP PAC brains and on-the-rack controllers.

The SNAP-AIV-4 provides four channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or -5 to +5 VDC operation. Although the four channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. This module can be used with SNAP PAC brains and R-series controllers. It can also be used with legacy SNAP Ethernet-based brains.

The SNAP-AIV provides two channels of analog voltage input, either -10 to +10 VDC or -5 to +5 VDC. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. Modules are factory calibrated.

The SNAP-AIVRMS provides two channels of 0-250 V AC or DC analog input. It may be used to monitor 120/240-volt AC/DC and 12/24/48-volt AC/DC system voltage. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

The SNAP-AICTD provides four channels of analog temperature input from any industry-standard Integrated Circuit Temperature Device (ICTD). Simple two-wire connections are made to the pluggable terminal strip on top of the module. Although the four channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.
This module can be used with SNAP PAC brains and R-series controllers. It can also be used with legacy SNAP Ethernet-based brains.

The SNAP-AICTD-8 provides eight channels of analog temperature input from any industry-standard Integrated Circuit Temperature Device (ICTD). Simple two-wire connections are made to standard connectors on top of the module. Although the eight channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

This module can be used only with SNAP PAC R-series controllers, SNAP PAC EB-series Ethernet brains, and SNAP PAC SB-series serial brains.

The SNAP-AICTD provides two channels of analog temperature input from any industry-standard Integrated Circuit Temperature Device (ICTD). Simple two-wire connections are made to the pluggable terminal strip on top of the module. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

The SNAP-AIRTD provides two channels of analog temperature input. Nominal input range is -200 to +850 degrees C. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. Modules are factory calibrated.

The SNAP-AIR40K-4 provides four channels of analog-to-digital conversion, ideal for thermistors used in HVAC applications or for reading the resistance of potentiometer input. Default range is 0-40 K Ohms; the module can also be configured for 0-20 K, 0-10 K, or 0-5 K Ohms. Resistance probes must be isolated from each other.
This module can be used with SNAP PAC brains and R-series controllers. It can also be used with legacy SNAP Ethernet-based brains.

2-channel analog input; 4 … 20 mA; Differential input; S5 PLC data format

2-channel analog input; 0 … 20 mA; Single-ended

2-channel analog input; 4 … 20 mA; Single-ended; 16 bits; 60 Hz

2-channel analog input; 0 … 1 A AC/DC; Differential input

2-channel analog input; 4 … 20 mA; Single-ended; Intrinsically safe

2-channel analog input; 4 … 20 mA; Differential input

4-channel analog input; 0 … 20 mA; Single-ended

4-channel analog input; for NTC resistance sensors; Adjustable

2-channel analog input; 0 … 20 mA; Single-ended; 60 Hz

2-channel analog input; Resistor bridges (strain gauge)

4-channel analog input; Resistance measurement; Adjustable

8-channel analog input; Resistance measurement; Adjustable

8-channel analog input; Resistance measurement; Adjustable; Ext. Temperature

2-channel analog input; 0 … 20 mA; Differential input

2-channel analog input; 0 … 20 mA; Differential input; S5 PLC data format

4-channel analog input; 0 … 20 mA; Single-ended