The CM 500W is a table top low cost crimp tool which takes a variety of dies. Air operated, using standard factory air (5 bar min), with a pressing capacity of up to 1200kp, this portable device allows easy and convenient change of tools and set up for different crimp contacts. Compare this to equipment from national manufacturers at twice the price. The C200 is built to crimp in a linear up and down fashion and not like a standard scissors crimp which can wear tools out quickly. Two crimp contact positioning and holding systems are available, a simple crimp contact star for standard contacts, or a positioning slide for holding both the crimp contact and the wire

The Nipper is the safe way to remove the plastic stops on the ends of IC tubes. Spring loaded to open. Place the nipper over the end of the plug, snap shut and pull out the stopper. Safely holds stopper in the jaws for discarding into waste receptacle.
Save your fingernails and teeth by using this inexpensive and convenient tool to make loading of IC tubes into automated dispensing and pick and place units more convenient

This PGA extractor is a quick and simple way to extract PGA components without priour adjustment. Setting for size and extraction are done in one step.During extraction, the claws press firmly onto the edges of the component. Any possible damage caused by the component slipping out is thereby prevented.
In order to protect the sensitive IC-components from electrostatic charges, all parts of the Inserter are electrically conductive, with a surface resistance of < 10000 oms

Flexible grips are manufactured from electrically conductive materials with a surface resistance of <105 Ohms. The extractor hooks are made of stamped and polished V2A steel. Insert the hook into the cut-outs on the PLCC, squeeze the grips together, and the PLCC will be safely pulled from the socket.