PSoC™ 6-BLE Pioneer Kit

The PSoC™ 6-BLE Pioneer Kit (CY8CKIT-062-BLE) hardware platform enables design and debug of the PSoC™ 63 Line. The PSoC™ 6-BLE Pioneer Kit features a single- or dual-core MCU, with an Arm Cortex-M4 and Arm Cortex-M0+, 1MB of Flash, 288KB of SRAM, 78 GPIO, 7 programmable analog blocks, 56 programmable digital blocks, Bluetooth Low Energy, a serial memory interface, a PDM-PCM digital microphone interface, and industry-leading capacitive-sensing with CAPSENSE™. The PSoC™ 6-BLE Pioneer Kit also comes with an E-ink display shield board. This shield board contains an ultra-low-power 2.7" E-ink display, a thermistor, a 6-axis motion sensor, and a digital microphone.

ModusToolbox™ software provides support for design and development of the PSoC™ 6-BLE Pioneer Kit. To find out more, please visit the ModusToolbox™ page. For code examples, please visit the Infineon GitHub Repository or the New Application Wizard in ModusToolbox™. This kit is shipped with KitProg2 installed. The ModusToolbox™ software requires KitProg3. Before using the kit with ModusToolbox™, ensure that the kit is upgraded to KitProg3. The tool and instructions are available in the Firmware Loader GitHub repository.

The CY8CKIT-062-BLE package has the following contents:

• PSoC 6 BLE Pioneer Board
• CY8CKIT-028-EPD E-INK Display Shield
• CY5677 CySmart BLE 4.2 USB Dongle
• USB Type-A to Type-C cable
• Four jumper wires
• Two proximity sensor wires
• Quick Start Guide

Mbed SDK Support

The PSoC™ 6-BLE Pioneer Kit is now supported in the Mbed OS. To find out more, please visit our team page on os.mbed.com/teams/Infineon, and also PSoC™ 6-BLE Pioneer Kit to find out more.

Notice

The table below explains which revisions of the PSoC™ 6-BLE Pioneer Kit are supported in which versions of PSoC™ Creator, PDL, and ModusToolbox™.

Kit Revision (on box) PSoC Creator Version Creator PDL Version ModusToolbox Version
** Not Supported Not Supported Not Supported
*A 4.1 or greater 3.0.1 Not Supported
*B 4.2 or greater 3.0.1 or greater Not Supported
*C and above 4.2 or greater 3.0.1 or greater 1.0 or greater

RF Regulatory Certification

TELEC/GITEKI

Software Title Description Link
PSoC™ Creator PSoC™ Creator is an Integrated Design Environment (IDE) which allows concurrent hardware and application firmware design of PSoC 3, PSoC 4 and PSoC 5LP systems. Learn More
PSoC™ Programmer PSoC™ Programmer is a flexible, integrated programming application for programming PSoC™ devices. Learn More
AIROC™ Bluetooth® Connect App AIROC™ Bluetooth® Connect App is a Bluetooth LE host emulation tool for Windows PCs. Learn More
AIROC™ Bluetooth® Connect App - Android Mobile App AIROC™ Bluetooth® Connect App is a Bluetooth Low Energy utility developed by Infineon. Learn More
AIROC™ Bluetooth® Connect App - iOS Mobile App AIROC™ Bluetooth® Connect App is a Bluetooth Low Energy utility developed by Infineon. Learn More
Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.

Reference design board – 90 W/2 Ohms x 2-channel class D audio power amplifier, featuring IR4321

Benefits

• Output power: 90 W x 2 channels (10%THD+N 2 Ohms load no heatsink)
• 135 W x 2 channels (10%THD+N 2Ohms load *with heatsink),
• Multiple protection features: over-current protection (OCP), high and low side
• Over-voltage protection (OVP),
• Under-voltage protection (UVP), high and low side
• DC-protection (DCP),
• Over-temperature protection (OTP)
• PWM modulator: self-oscillating half-bridge topology with optional clock synchronization

Potential Applications

• Class D Audio

Reference design board – single-channel 1700 W (2 Ohm) half-bridge class D audio power amplifier

The reference design board IRAUDAMP9, 1-channel 1700 W half-bridge class D audio power amplifier is featuring the IRS2092S controller IC.

Benefits

• 1700 W single channel (2 Ohms load THDN=10%, 1 kHz)
• 1% THD+N distortion @ 1200 W, 2 Ohms +/-75 V
• Residual noise 290 µV, IHF-A weighted, AES-17 filter
• 94% efficiency @ 1200 W, 2 Ohms, single channel driven, class D stage
• OCP, OVP, UVP, DC protection, HOPS (high output peak shutdown protection) and OTP
• Self-oscillating half-bridge topology with optional clock synchronization
• Featuring IRS2092S gate driver (with external BJT buffering) and IRFB4227PBF 200 V MOSFETs

Potential Applications

• Class D Audio

Reference design board – 100 W/4 Ohms x 2-channel class D audio power amplifier featuring IR4302

Benefits

• 100 W x 2 channels, (THD=10%, 1 kHz, 4 Ohms)
• 008% THD+N distortion @ 30 W, 4 Ohms
• Residual noise 220 µV, IHF-A weighted, AES-17 filter
• 96% efficiency @ 100 W, 4 Ohms, class D stage
• OCP, OVP, UVP and OTP
• Self-oscillating half-bridge topology
• Featuring IR4302 PowIRaudio™ integrated class D IC

Potential Applications

• Class D Audio

Reference design board – 120 W x 2-channel class D audio power amplifier using the IRS2092S and IRF6645

Benefits

• 120 W x 2 channels (THD=1%, 1 kHZ)
• 005% THD+N @ 60 W, 4 Ohms
• 170 µV distortion, IHF-A weighted, AES-17 filter
• 96% efficiency @ 120 W, 4 Ohms, single channel driven, class D stage
• OCP, OVP, UVP, DC protection and OTP
• Self-oscillating half-bridge topology with optional clock synchronization
• Featuring IRS2092S controller and gate driver IC and IRF6645 DirectFET MOSFETs

Potential Applications

• Class D Audio

Reference design board – 2-channel 500 W/ch half-bridge class D audio power amplifier featuring IRS2452M controller IC

The IRAUDAMP23 evaluation board is a two-channel, 500 W/ch (100 V_rms, 20 Ω at ±148.3 V) half-bridge Class D audio power amplifier for high impedance distribution system. This evaluation board demonstrates how to use the IRS2452AM controller IC, implement protection circuits, and design an optimum PCB layout.

Summary of Features

• Output power:
• 500 W x 2 channels (1% THD+N, 100 V_rms or 70 V_rms)
• Multiple protection features:
• PWM modulator:
  
• Over-current protection (OCP), high side and low side FETs
• Over-voltage protection (OVP)
• Under-voltage protection (UVP), high side and low side FETs
• Over-temperature protection (OTP)
• PWM modulator:
  
• Self-oscillating half bridge topology with optional clock synchronization

Reference design board – 2-channel 300 W/CH half-bridge class D audio power amplifier featuring IRS2052M controller IC

Benefits

• 300 W x 2 channels, (THD=1%, 1 kHz, 4 Ohms)
• 0.008% THD+N distortion @ 100 W, 4 Ohms
• Residual noise 220 µV, IHF-A weighted, AES-17 filter
• 90% efficiency @ 300 W, 4 Ohms, class D stage
• OCP, OVP, UVP and OTP
• Self-oscillating half-bridge topology with optional clock synchronization
• Featuring IRS2052M controller and gate driver IC and IRF6775 DirectFET MOSFETs

Potential Applications

• Class D Audio

Reference design board – 130 W/4 Ohms x 2-channel class D audio power amplifier featuring IR4301

Benefits

• 130 W x 2 channels, (THD=10%, 1 kHz, 4 Ohms)
• 02% THD+N distortion @ 50 W, 4 Ohms
• Residual noise 250 µV, IHF-A weighted, AES-17 filter
• 96% Efficiency @ 130 W, 4 Ohms, class D stage
• OCP, OVP, UVP, DC protection and OTP
• Self-oscillating half-bridge topology with optional clock synchronization
• Featuring IR4301 PowIRaudio™ integrated class D IC

Potential Applications

• Class D Audio

Reference design board – 70 W/4 Ohms x 2-channel class D audio power amplifier featuring IR4302

Benefits

• 70 W x 2 channels, (THD=10%, 1 kHz, 4 Ohms)
• 015% THD+N distortion @ 30 W, 4 Ohms
• Residual noise 250 µV, IHF-A weighted, AES-17 filter
• 96% efficiency @ 70 W, 4 Ohms, class D stage
• OCP, OVP, UVP, DC protection and OTP
• Self-oscillating half-bridge topology with optional clock synchronization
• Featuring IR4302 PowIRaudio™ integrated Class D IC

Potential Applications

• Class D Audio

Reference design board – 2-channel 100 W (4 Ohms) half-bridge class D audio power amplifier featuring IR4301 with single power supply

Benefits

• 100 W x 2 channels, (THD=10%, 1 kHz, 4 Ohms)
• 02% THD+N distortion @ 10 W, 4 Ohms
• Residual noise 230 µV, IHF-A weighted, AES-17 filter
• 96% efficiency @ 75 W, 4 Ohms, class D stage
• OCP, OVP, UVP and OTP
• Self-oscillating half-bridge topology
• Featuring IR4301 PowIRaudio™ integrated class D IC

Potential Applications

• Class D Audio

Reference design board – 50 W/2 Ohms x 2-channel class D audio power amplifier featuring IR4322

Benefits

• Output power 50 W x 2 channels (10%THD+N 2Ohms load no heatsink)
• 100 W x 2 channels (10%THD+N 2Ohms load *with heatsink),
• Multiple protection features: over-current protection (OCP), high and low side
• Over-voltage protection (OVP),
• Under-voltage protection (UVP), high and low side
• DC-protection (DCP),
• Over-temperature protection (OTP)
• PWM modulator: self-oscillating half-bridge topology with optional clock synchronization

Potential Applications

• Class D Audio

Reference design board - 2-channel 120 W half-bridge class D audio power amplifier featuring IRS20957 controller IC

Benefits

• 120 W x 2 channels, (THD=1%, 1 kHZ)
• 004% THD+N distortion @ 60 W, 4 Ohms
• Residual noise 52 µV, IHF-A weighted, AES-17 filter
• 96% efficiency @ 120 W, 4 Ohms, single channel driven, class D stage
• OCP, OVP, UVP, DC protection and OTP
• Self-oscillating half-bridge topology with optional clock synchronization
• Featuring IRS20957S gate driver and IRF6645 DirectFET MOSFETs

Potential Applications

• Class D Audio

Reference design board – 250 W/8 Ohm x 2-channel class D audio power amplifier featuring IRS20957 controller IC

Benefits

• 250 W x 2 channels (8 Ohms load THD=1%, 1 kHZ)
• 005% THD+N distortion @ 125 W, 8 Ohms
• Residual noise 90 µV, IHF-A weighted, AES-17 filter
• 96% efficiency @ 250 W, 8 Ohms, single channel driven, class D stage
• OCP, OVP, UVP, DC protection and OTP
• Self-oscillating half-bridge topology with optional clock synchronization
• Featuring IRS20957S gate driver and IRF6785 DirectFET MOSFET

Potential Applications

• Class D Audio

Reference design board – 25 W-500 W scalable output power class D audio power amplifier featuring the IRS2092 controller IC

This reference design board is using the IRS2092 protected digital audio driver.

Benefits

• 250 W x 2 channels, (THD=1%, 1 kHz, 4 Ohms)
• 0.01% THD+N distortion @ 120 W, 4 Ohms
• Residual noise 200 µV, IHF-A weighted, AES-17 filter
• Single layer PCB
• OCP, OVP, UVP, DC protection and OTP
• Half bridge/full bridge selector
• Featuring IRS2092S gate driver IC and IRFI4019H-117P MOSFETs

Potential Applications

• Class D Audio

Reference design board +/-30 V power supply for class D audio amplifier featuring the IRS27952S resonant half-bridge controller

Benefits

• 110 V_AC or 220 V_AC selectable input voltage range
• 89% efficiency at low line, 91% efficiency at high line
• Over current and short circuit protection
• Small form factor, light weight
• Featuring IRS27952S resonant half-bridge control IC

Potential Applications

• Class D Audio

PSoC™ 6 BLE Prototyping Kit

The PSoC™ 6 BLE Prototyping Kit (CY8CPROTO-063-BLE) is a low-cost hardware platform that enables design and debug of PSoC™ 6 MCUs. This kit is designed with a snap-away form-factor, allowing users to separate the KitProg (on-board programmer and debugger) from the target board and use independently.

Featuring the CYBLE-416045-02 EZ-BLE Creator Module

The CYBLE-416045-02 is a fully certified and qualified module supporting Bluetooth Low Energy (BLE) wireless communication. The CYBLE-416045-02 is a turnkey solution and includes onboard crystal oscillators, trace antenna, passive components, and the PSoC™ 63 MCU line.

The EZ-BLE Creator module is a scalable and reconfigurable platform architecture. It combines programmable and reconfigurable analog and digital blocks with flexible automatic routing. The CYBLE-416045-02 also includes digital programmable logic, high-performance analog-to-digital conversion (ADC), low-power comparators, and standard communication and timing peripherals.

The CYBLE-416045-02 includes a royalty-free BLE stack compatible with Bluetooth 5.0 and provides up to 36 GPIOs in a 14 × 18.5 × 2.00 mm package. The CYBLE-416045-02 is a complete solution and an ideal fit for applications seeking a high performance BLE wireless solution.

Flexible prototyping

The PSoC™ 6 BLE Prototyping Kit provides easy access to all the device I/Os in a breadboard-compatible format and includes an LED, a push button, and current measuring jumpers.

This kit also contains an on-board Programmer and Debugger, designed using PSoC™ 5LP, that can support industry standard programming interface like CMSIS-DAP and Drag-and-Drop programing.

Supported software

The PSoC™ 6 BLE Prototyping Kit can be evaluated using the PSoC™ Creator IDE or ModusToolbox™. For ModusToolbox code examples, please visit the GitHub Repository or the New Application Wizard in ModusToolbox™.

Software Title Description
PSoC™ Creator PSoC™ Creator is an Integrated Design Environment (IDE) which allows concurrent hardware and application firmware design of PSoC™ 3, PSoC™ 4, PSoC™ 5LP, and PSoC™ 6 MCUs.
PSoC™ Programmer PSoC™ Programmer is a flexible, integrated programming application for programming PSoC™ devices.
AIROC™ Bluetooth® Connect App AIROC™ Bluetooth® Connect App is a Bluetooth LE host emulation tool for Windows PCs.
AIROC™ Bluetooth® Connect - Mobile App AIROC™ Bluetooth® Connect App is a Bluetooth Low Energy utility

Kit contents

• PSoC™ 6 BLE Prototyping baseboard
• Micro USB Cable
• Quick Start Guide

CYUSB3ACC-005 FMC interconnect board for the EZ-USB™ FX3 SuperSpeed explorer kit

The CYUSB3ACC-005 FMC interconnect board is designed to interconnect a Xilinx FPGA board with the EZ-USB™ FX3 SuperSpeed explorer kit (CYUSB3KIT-003)

Guidelines to use EZ-USB™ FX3 for applications involving Xilinx FPGAs are available in the following document: AN65974 - Designing with the EZ-USB™ FX3 Slave FIFO Interface

CYBT-333047-EVAL EZ-BT Module Arduino Evaluation Board

The EZ-BT Module Arduino Evaluation Board (CYBT-333047-EVAL) enables you to evaluate and develop applications on the EZ-BT WICED™ Module, CYBT-333047-02. CYBT-333047-EVAL can be used as a standalone evaluation kit or can be combined with Arduino compatible shield

Standalone Usage

To use the CYBT-333047-EVAL:

1. Configure the evaluation board headers/switches to the desired settings
2. Connect the evaluation board to a PC via a USB cable
3. Refer to KBA221025 for platform files, Makefile target generation, and HCI UART switch position setting for programming
4. Open the WICED™ Studio SDK, develop your application, program and test

Optional Usage with Arduino Shield

Arduino compatible shields can be connected through the Arduino compatible headers (J3/J4/J6/J7) to provide additional I/O connections and functionality.

Kit Contents

1 X EZ-BT Module Arduino Evaluation Board (CYBT-333047-EVAL) with on-board EZ-BT WICED™ Module (CYBT-333047-02)

1 X USB Cable

EZ-BT Module Arduino Evaluation Board

The EZ-BT Module Arduino Evaluation Board (CYBT-413055-EVAL) enables you to evaluate and develop applications on the EZ-BT WICED™ Module, CYBT-413055-02. CYBT-413055-EVAL can be used as a standalone evaluation kit or can be combined with Arduino compatible shields.

Standalone usage

To use the CYBT-413055-EVAL:

1) Configure the evaluation board headers/switches to the desired settings

2) Connect the evaluation board to a PC via a USB cable

3) Open the ModusToolbox™, develop your application, program and test

Optional usage with Arduino shield:

Arduino compatible shields can be connected through the Arduino compatible headers (J3/J4/J6/J7) to provide additional I/O connections and functionality.

Kit contents

1 X EZ-BT Module Arduino Evaluation Board (CYBT-413055-EVAL) with on-board EZ-BT WICED™ Module (CYBT-413055-02)

1 X USB Cable

PSoC™ 64 "Secure Boot" Prototyping Kit

The PSoC™ 64 "Secure Boot" Prototyping Kit (CY8CPROTO-064B0S3) is a low-cost hardware platform that enables you to evaluate and develop your application using the PSoC™ 64 Line of Secured MCUs. The kit allows you to provision the PSoC™ 64 "Secure" MCU with unique keys and security policies so that only signed code can be executed on the kit. Each board in the kit contains the following features:

• PSoC™ 64 "Secure" MCU with up to 512KB of flash memory, up to 256KB of SRAM memory
• On-board programming/debugging with KitProg3
• 512-Mbit Quad-SPI Semper™ NOR flash
• Supports 1.8V, 2.5V and 3.3V operation of PSoC™ 64 "Secure" MCU
• Current measurement header
• Two user LEDs, one user button, and one reset button

Featuring the PSoC™ 64 "Secure Boot" MCU

The PSoC™ 64 family of Secured MCUs are purpose-built for the IoT, delivering the industry’s lowest power, most flexibility, and built-in security. The PSoC™ 64 secured line of MCUs feature out-of-the-box security functionality. It provides an isolated root-of-trust (RoT) with true attestation and build-in provisioning services. In addition, it comes with a pre-configured secured processing environment, secured boot and software management through secured over-the-air (SOTA) update, as well as security services. These various security services can be used to implement an end-to-end security model for connected devices following a "zero trust" architecture. To find out more about the unique and differentiating features of our PSoC™ 64 "Secure" MCU, please visit the PSoC™ 64 "Secure" MCU product page.

Development tools

This kit is supported in ModusToolbox™ IDE. Additional code examples can be found on the GitHub Repository.

Kit contents

• Three (3x) PSoC™ 64 "Secure Boot" Prototyping Boards
• USB Type-A to Micro-B cable
• Quick Start Guide (printed on the kit package)

Würth Elektronik eiSos GmbH & Co. KG

This kit uses the following parts supplied by Würth Elektronik eiSos GmbH & Co. KG:

• WE-XTAL Watch Crystals
• WS-TASV J-Bend SMT Tact Switch 4.2x3.2 mm
• WE-PMI Power Multilayer Inductor Shielded
• Type B with Pegs, High Current at Pin 1 & Pin 5 Micro USB 2.0 SMT Type B Horizontal 5 Contacts High Current
• WR-PHD 2.54 mm THT Angled Pin Header
• WCAP-CSGP MLCCs 0402

PSoC™ 62S2 evaluation Kit (CY8CEVAL-062S2)

PSoC™ 62S2 evaluation kit (CY8CEVAL-062S2) is a hardware evaluation platform for rapid prototyping of IoT applications based on the PSoC™ 62xA, PSoC™ 62x8 MCU product families. This kit features an M.2 interface that enables you to connect the supported M.2 radio modules based on AIROC™ Wi-Fi/Bluetooth® combo devices.

Kit Features

• Featuring the PSoC™ 62xA MCU - Ultra low power, high performance MCU based on the dual core CPU (Arm^® Cortex^®-M4 and Arm^® Cortex^®-M0+), 2048 KB of on-chip Flash, 1024 KB of SRAM, Quad-SPI external memory interface, built-in hardware and software security features, rich analog, digital, and communication peripherals
• Base Features – PSoC™ 62xA MCU (OPN: CY8C624ABZI-S2D44), M.2 interface connector to connect the M.2 radio modules, OPTIGA™ Trust M security controller, Integrated Programmer / Debugger (KitProg3), User LEDs(2), RGB LED(1), Push buttons(2), Potentiometer, KHz/MHz crystal
• Additional Features – CAPSENSE™ slider(5-segment), CAPSENSE™ buttons(2), Infineon Quad SPI NOR flash (512-Mbit), Infineon Quad SPI FRAM (4-Mbit), USB-FS Device I/F (PSoC™ 6), microSD Card Slot
• Hardware Expansion Features - M.2 interface connector to connect the M.2 radio modules, mikroBUS interfacefor hardware expansion using Click boards, Arduino Uno R3, Extended IO headers, Program/Debug Header
• Software Support - ModusToolbox™ software
• Board Support Package - TARGET_CY8CKIT-062S2-43012

Hardware Type

AIROC™ Device

Board Support Package

Base board with no M.2 module

None

TARGET_CY8CEVAL-062S2

Base board with Type 1YN module

CYW43439

TARGET_CY8CEVAL-062S2-MUR-43439M2

Base board with Type 2BC module

CYW4373

TARGET_ CY8CEVAL-062S2-MUR-4373M2

Base board with Type 2AE module

CYW4373E

TARGET_ CY8CEVAL-062S2-MUR-4373EM2

Base board with LWB+ module

CYW43439

TARGET_ CY8CEVAL-062S2-LAI-43439M2

Base board with LWB5+ module

CYW4373E

TARGET_CY8CEVAL-062S2-LAI-4373M2

• Code Examples available at Infineon’s GitHub Repository
• Applicable Product families - PSoC™ 62xA, PSoC™ 62x8

Kit Contents - PSoC^® 62S2 evaluation Board, USB Type-A to Micro-B cable, Jumper wires, Quick Start Guide

PSoC™ 62S3 Wi-Fi BT Prototyping Kit (CY8CPROTO-062S3-4343W)

PSoC™ 62S3 Wi-Fi BT Prototyping Kit (CY8CPROTO-062S3-4343W) is a low cost hardware evaluation platform for rapid prototyping of applications based on the PSoC™ 62x5, PSoC™ 61x5 MCU product families.

Summary of Features

• Featuring the PSoC™ 62x5 MCU - Ultra low power, high performance MCU based on the dual core CPU (Arm^® Cortex^®-M4 and Arm^® Cortex^®-M0+), 512 KB of on-chip Flash, 256 KB of SRAM, Quad-SPI external memory interface, built-in hardware and software security features, rich analog, digital, and communication peripherals
• Base Features – PSoC™ 62x5 MCU (OPN: CY8C6245LQI-S3D72), Integrated Programmer / Debugger (KitProg3), User LEDs(1), Push button, KHz crystal
• Additional Features – CAPSENSE™ slider(5-segment), CAPSENSE™ buttons(2), Infineon Quad SPI NOR flash (512-Mbit), USB-FS Device I/F (PSoC 6), Infineon AIROC™ Wi-Fi Bluetooth® Combo radio module
• Hardware Expansion Features - Extended IO headers, Program/Debug Header
• Software Support - ModusToolbox™ software
• Board Support Package - TARGET_CY8CPROTO-062S3-4343W
• Code Examples available at Infineon’s GitHub Repository
• Applicable Product families - PSoC™ 62x5, PSoC™ 61x5

Kit Contents - PSoC™ 62S3 Wi-Fi BT Prototyping Board, USB Type-A to Micro-B cable, Quick Start Guide (printed on kit package)

CYBLE-012011-PROG EZ-BLE Module Programming Kit

The EZ-BLE Module Programming Kit (CYBLE-012011-PROG) enables you to easily program the following EZ-BLE PRoC modules prior to manufacturing: CYBLE-012011-00, CYBLE-212019-00 and CYBLE-212020-01.

Easy-to-Use With EZ-BLE Module Programming Kit

The CYBLE-012011-PROG kit is designed to be used with one of the following items: MiniProg3 (CY8CKIT-002), BLE Pioneer Kit (CY8CKIT-042-BLE) or a third party programming tool like MPQ-PSoC™ (4 port In-system Programmer for Infineon from RPM).

The life time of the socket used in this programming kit is 50,000 insertions.

Programming Procedure

1.Connect the kit with one of the following three programming devices:

a. BLE Pioneer kit (CY8CKIT-042-BLE)
b. MiniProg3 (CY8CKIT-002)
c. Third-party programming tool, such as MPQ-PSoC™

2. Put the BLE module in the socket. Ensure that the BLE module is in the correct orientation as shown in the image.

3. Connect the programming devices with a USB cable to a computer that has been installed with PSoC™ Programmer, PSoC™ Creator or a third-party programming software, such as MPManager from RPM.

4. Run the programming software to program the targeted BLE modules with your selected firmware.

Kit Contents

1 x EZ-BLE Module Programming Kit (CYBLE-012011-PROG)

EZ-BLE Module Programming Kit CYBLE-013025-PROG

The EZ-BLE Module Programming Kit (CYBLE-013025-PROG) enables you to easily program the CYBLE-013025-00 EZ-BTTM WICED module.

The life time of the socket used in this programming kit is 50,000 insertions.

For more information, visit:

• EZ-BT Module home page
• WICED Module Programmer User Guide – KBA225060
• EZ-Serial Firmware Platform page
• WICED SDK page

To use the CYBLE-013025-PROG

1. Put the BLE module in the socket (ensure that the BLE module is in the correct position of the socket, as shown above)

2. Connect the programming device with a USB cable to a computer that has been installed with WICED Module Programmer

3. Run the programming software to program the targeted BLE module with your selected fi¬rmware

Kit Contents

1 X EZ-BT Module Programming Kit CYBLE-013025-PROG
1 X USB Cable

CYBLE-022001-PROG EZ-BLE Module Programming Kit

The EZ-BLE Module Programming Kit (CYBLE-022001-PROG) enables you to easily program the following EZ-BLE PRoC modules prior to manufacturing: CYBLE-022001-00, CYBLE-222005-00 and CYBLE-222014-01.

Easy-to-Use With EZ-BLE Module Programming Kit

The CYBLE-022001-PROG kit is designed to be used with one of the following items: MiniProg3 (CY8CKIT-002), BLE Pioneer Kit (CY8CKIT-042-BLE) or a third party programming tool like MPQ-PSoC (4 port In-system Programmer for Infineon from RPM).

The life time of the socket used in this programming kit is 50,000 insertions.

Programming Procedure

1. Connect the kit with one of the following three programming devices:

a. BLE Pioneer kit (CY8CKIT-042-BLE)
b. MiniProg3 (CY8CKIT-002)
c. Third-party programming tool, such as MPQ-PSoC

2. Put the BLE module in the socket. Ensure that the BLE module is in the correct orientation as shown in the above image.

3. Connect the programming devices with a USB cable to a computer that has been installed with PSoC™ Programmer, PSoC™ Creator or a third-party programming software, such as MPManager from RPM.

4. Run the programming software to program the targeted BLE modules with your selected firmware.

Kit Contents

1 x EZ-BLE Module Programming Kit (CYBLE-022001-PROG)

AIROC™ CYBT-223058-EVAL Bluetooth® & Bluetooth® LE Module Evaluation Kit (CYBT-223058-EVAL)

The Infineon AIROC™ CYBT-223058-EVAL Bluetooth® & Bluetooth® LE 5.4 Module Evaluation Kit enables evaluation, prototyping, and development of a wide array of IoT applications using the AIROC™ CYBT-223058-02 module. The AIROC™ CYBT-223058-02 Bluetooth® Module is globally certified, and has an integrated PCB trace antenna, rapidly reducing the time-to-market.

The Infineon AIROC™ CYBT-223058-EVAL Evaluation Kit is supported in the AIROC™ Bluetooth® SDK v3.2 or later within ModusToolbox™ Software and Tools with many code examples for various use cases. To learn more about ModusToolbox™ and download the latest version of the Bluetooth® SDK, please visit the Bluetooth® SDK community page.

Kit Features

• AIROC™ CYBT-223058-EVAL Bluetooth® & Bluetooth® LE Module Evaluation Kit features:
• An evaluation board that can support various Bluetooth protocols including
• Generic Access Profile (GAP)
• Generic Attribute Profile (GATT)
• Security Manager Protocol (SMP)
• Radio Frequency Communication protocol (RFCOMM)
• Service Discovery Protocol (SDP)
• BLE Mesh protocol
• Eval board with integrated serial flash
• Input/output interfaces for communications and programming
• Various sensors like the light sensor, thermistor and LEDs
• External headers for debugging and connectivity
• Interfaces to USB power or to a coin cell
• PCB trace antenna and integrated PA/LNA
• 24MHz crystal oscillator

Kit Contents

• 1 X Module Arduino Evaluation Board (CYBT-223058-EVAL ) with on-board AIROC™ Module (CYBT-223058-02)
• 1 X USB Cable for USB – UART programming
• Convenient user buttons
• Bluetooth and Bluetooth module

To use the CYBT-223058-EVAL

1) Configure the evaluation board headers/switches to the desired settings

2) Connect the evaluation board to a PC via a USB cable

3) Open the ModusToolbox, develop your application, program and test

Note: Please recover the CYBT-223058-EVAL before programming.

The Arduino compatible headers (J3/J4/J6/J7) are optional connections, which provide additional I/O connections to the module and allow for other Arduino shields to be used during development.

SW1: Reset Switch routed to the XRES connection on the module.

SW2: Recover Switch routed to the UART_CTS connection on the module.

SW3: User-defined Switch routed to the P0 connection on the module via J9.

SW4: Switch connecting HCI UART connections on the module to host via USB.

SW5: Switch connecting PUART connections on the module to host via USB.

J1: Connection for external interface for direct HCI UART communication.

J2: Used for module power supply current measurement.

J3/J4/J6/J7: Arduino-compatible headers used with an Arduino compatible shield.

J8: Configures the VDD voltage input to the module as shown in the below table:

J8 Jumper Configuration VDD Voltage Level
Short 1 & 2 3.3V
Short 2 & 3 2.6V
Open 1.8V
J8 Jumper Configuration VDD Voltage Level

J9: Connects the P0 pad on the module to SW3.

J10: Connects the P27 pad on the module to LED D1.

J11: Module Power Supply Selection from LDO or external connector

The EZ-BT CYBT-223058-02 Module supports Bluetooth SIG Mesh, is qualified for the Bluetooth 5.4 speci¬fication and are certifi¬ed for the 2.4 GHz unlicensed frequency range in USA (FCC), Canada (ISED), Europe (CE) and Japan (MIC).

AIROC™ CYBT-253059-EVAL KIT OVERVIEW

The Infineon AIROC™ CYBT-253059-02 Bluetooth® & Bluetooth® LE 5.4 Module Evaluation Kit (CYBT-253059-EVAL) enables evaluation, prototyping, and development of a wide array of IoT applications using the AIROC™ CYBT-253059-02 module.

The AIROC™ CYW20820 Bluetooth® & Bluetooth® LE system on chip provides reliable Bluetooth® connectivity, core spec compliant to 5.4, along with high-performance compute capability integrating an Arm® Cortex®-M4 processor with floating point unit. It is a highly integrated device integrating multiple serial interfaces, PWMs, and more. The AIROC™ CYW20820 Bluetooth® & Bluetooth® LE SoC is designed to support a wide spectrum of Bluetooth® use cases for home automation, sensors (medical, home, security, and industrial), lighting, Bluetooth® Mesh, or any Bluetooth® connected IoT application.

This Evaluation Kit (CYBT-253059-EVAL) includes an Infineon in-house AIROC™ Bluetooth® Module hosting the AIROC™ CYW20820 that is globally certified and has PCB antenna integrated, rapidly reducing time-to-market.

The AIROC™ CYBT-253059-EVAL is supported in the AIROC™ Bluetooth® SDK within ModusToolbox™ Software and Tools with copious code examples and documentation enablement for Bluetooth® LE data transfer, and Bluetooth® Mesh use cases.

Kit Features

• AIROC™ CYBT-253059-EVAL Bluetooth® & Bluetooth® LE 5.4 Module Evaluation Kit features:
• An evaluation board that can support various Bluetooth protocols including Generic Access Profile (GAP), Generic Attribute Profile (GATT), Security Manager Protocol (SMP), Radio Frequency Communication protocol (RFCOMM), Service Discovery Protocol (SDP), and BLE Mesh protocol
• Eval board with integrated serial flash
• Input/output interfaces for communications and programming
• Various sensors like the light sensor, thermistor and LEDs
• External headers for debugging and connectivity
• Interfaces to USB power or to a coin cell
• PCB Antenna and PA/LNA
• 24MHz crystal oscillator

Kit Contents

• 1 X Module Arduino Evaluation Board (CYBT-253059-EVAL) with on-board AIROC™ Module (CYBT-253059-02)
• 1 X USB Cable for USB – UART programming
• Convenient user buttons
• Bluetooth and Bluetooth module

To use the CYBT-253059-EVAL

1) Configure the evaluation board headers/switches to the desired settings

2) Connect the evaluation board to a PC via a USB cable

3) Open the ModusToolbox, develop your application, program and test

Note: Please recover the CYBT-253059-EVAL before programming.

The Arduino compatible headers (J3/J4/J6/J7) are optional connections, which provide additional I/O connections to the module and allow for other Arduino shields to be used during development.

SW1: Reset Switch routed to the XRES connection on the module.

SW2: Recover Switch routed to the UART_CTS connection on the module.

SW3: User-defined Switch routed to the P0 connection on the module via J9.

SW4: Switch connecting HCI UART connections on the module to host via USB.

SW5: Switch connecting PUART connections on the module to host via USB.

J1: Connection for external interface for direct HCI UART communication.

J2: Used for module power supply current measurement.

J3/J4/J6/J7: Arduino-compatible headers used with an Arduino compatible shield.

J8: Configures the VDD voltage input to the module as shown in the below table:

J8 Jumper Configuration VDD Voltage Level
Short 1 & 2 3.3V
Short 2 & 3 2.6V
J8 Jumper Configuration VDD Voltage Level

J9: Connects the P0 pad on the module to SW3.

J10: Connects the P27 pad on the module to LED D1.

J11: Module Power Supply Selection from LDO or external connector.

The CYBT-253059-02 Module supports Bluetooth SIG Mesh, is qualified for the Bluetooth 5.4 specification and are certified for the 2.4 GHz unlicensed frequency range in USA (FCC), Canada (ISED), Europe (CE) and Japan (MIC).

AIROC™ CYW20820 Bluetooth® & Bluetooth® LE Module Evaluation Kit (CYBT-263065-EVAL)

The Infineon AIROC™ CYBT-263065-EVAL Bluetooth® & Bluetooth® LE 5.4 Module Evaluation Kit enables evaluation, prototyping, and development of a wide array of IoT applications using the AIROC™ CYBT-263065-02 module. The AIROC™ CYBT-263065-02 Bluetooth® Module is globally certified, and has an external antenna interface with a -u.FL connector, rapidly reducing the time-to-market.

The Infineon AIROC™ CYBT-263065-EVAL Evaluation Kit is supported in the AIROC™ Bluetooth® SDK v3.2 or later within ModusToolbox™ Software and Tools with many code examples for various use cases. To learn more about ModusToolbox™ and download the latest version of the Bluetooth® SDK, please visit the Bluetooth® SDK community page.

Kit Features

AIROC™ CYBT-263065-EVAL Bluetooth® & Bluetooth® LE Module Evaluation Kit features:

• An evaluation board that can support various Bluetooth protocols including
• Generic Access Profile (GAP)
• Generic Attribute Profile (GATT)
• Security Manager Protocol (SMP)
• Radio Frequency Communication protocol (RFCOMM)
• Service Discovery Protocol (SDP)
• BLE Mesh protocol
• Eval board with integrated serial flash
• Input/output interfaces for communications and programming
• Various sensors - light sensor, thermistor and LEDs
• External headers for debugging and connectivity
• Interfaces to USB power or to a coin cell
• PCB Antenna and PA/LNA
• 24MHz crystal oscillator

Kit Contents

• 1 X Module Arduino Evaluation Board (CYBT-263065-EVAL) with on-board AIROC™ Module (CYBT-263065-02)
• 1 X USB Cable for USB – UART programming
• Convenient user buttons
• Bluetooth and Bluetooth module

To use the CYBT-263065-EVAL

Figure 2: CYBT-263065-EVAL Bottom View

1) Configure the evaluation board headers/switches to the desired settings.

2) Connect the evaluation board to a PC via a USB cable.

3) Open ModusToolbox, and develop, program, and test your application.

Note: Recover the CYBT-263065-EVAL board before programming.

The Arduino-compatible headers (J3/J4/J6/J7) are optional connections, which provide additional I/O connections to the module and allow for other Arduino shields to be used during development.

SW1: Reset switch routed to the XRES connection on the module.

SW2: Recover switch routed to the UART_CTS connection on the module.

SW3: User-defined switch routed to the P0 connection on the module via J9.

SW4: Switch connecting HCI UART connections on the module to the host via USB.

SW5: Switch connecting PUART connections on the module to the host via USB.

J1: Connection for an external interface for direct HCI UART communication.

J2: Used for module power supply current measurement.

J3/J4/J6/J7: Arduino-compatible headers used with an Arduino-compatible shield.

J8: Configures the VDD voltage input to the module as shown in the following table:

J8 Jumper Configuration VDD Voltage Level
Short 1 & 2 3.0V
Open 1.8V
J8 Jumper Configuration VDD Voltage Level

J9: Connects the P0 pad on the module to SW3.

J10: Connects the P26 pad on the module to LED D1.

J11: Module power supply selection from LDO or external connector.

The EZ-BT CYBT-263065-02 Module supports Bluetooth SIG Mesh, is qualified for the Bluetooth 5.4 speci¬fication and is certifi¬ed for the 2.4-GHz unlicensed frequency range in USA (FCC), Canada (ISED), Europe (CE), and Japan (MIC).

AIROC™ CYBT-273063-EVAL Bluetooth® & Bluetooth® LE Module Evaluation Kit (CYBT-273063-EVAL)

The Infineon AIROC™ CYBT-273063-EVAL Bluetooth® & Bluetooth® LE 5.4 Module Evaluation Kit (CYBT-273063-EVAL ) enables evaluation, prototyping, and development of a wide array of IoT applications using the AIROC™ CYBT-273063-02 module. The AIROC™ CYBT-273063-02 Bluetooth® Module is globally certified, and has an integrated PCB trace antenna, rapidly reducing the time-to-market.

The Infineon AIROC™ CYBT-273063-EVAL Evaluation Kit is supported in the AIROC™ Bluetooth® SDK v3.2 or later within ModusToolbox™ Software and Tools with many code examples for various use cases. To learn more about ModusToolbox™ and download the latest version of the Bluetooth® SDK, please visit the Bluetooth® SDK community page.

Kit Features

• AIROC™ CYBT-273063-EVAL Bluetooth® & Bluetooth® LE Module Evaluation Kit features:
• An evaluation board that can support various Bluetooth protocols including
• Generic Access Profile (GAP)
• Generic Attribute Profile (GATT)
• Security Manager Protocol (SMP)
• Radio Frequency Communication protocol (RFCOMM)
• Service Discovery Protocol (SDP)
• BLE Mesh protocol
• Eval board with integrated serial flash
• Input/output interfaces for communications and programming
• Various sensors like the light sensor, thermistor and LEDs
• External headers for debugging and connectivity
• Interfaces to USB power or to a coin cell
• PCB trace antenna and integrated PA/LNA
• 24MHz crystal oscillator

Kit Contents

• 1 X Module Arduino Evaluation Board (CYBT-273063-EVAL) with on-board AIROC™ Module (CYBT-273063-02)
• 1 X USB Cable for USB – UART programming
• Convenient user buttons
• Bluetooth and Bluetooth module

EZ-BT Module Arduino Evaluation Board

The EZ-BT Module Arduino Evaluation Board (CYBT-423054-EVAL) enables you to evaluate and develop applications on the EZ-BT WICED™ Module, CYBT-423054-02. CYBT-423054-EVAL can be used as a standalone evaluation kit or can be combined with Arduino compatible shields.

Standalone usage

To use the CYBT-423054-EVAL,

1) Con­figure the evaluation board headers/switches to the desired settings

2) Connect the evaluation board to a PC via a USB cable

3) Open the ModusToolbox™, develop your application, program and test

Optional usage with Arduino shield

Arduino compatible shields can be connected through the Arduino compatible headers (J3/J4/J6/J7) to provide additional I/O connections and functionality.

Kit contents

1 X EZ-BT Module Arduino Evaluation Board (CYBT-423054-EVAL) with on-board EZ-BT WICED™ Module (CYBT-423054-02)

1 X USB Cable

CYBT-483056-EVAL EZ-BT Module Arduino Evaluation Board

The EZ-BT Module Arduino Evaluation Board (CYBT-483056-EVAL) enables you to evaluate and develop applications on the EZ-BT WICED™ Module, CYBT-483056-02. CYBT-483056-EVAL can be used as a standalone evaluation kit or can be combined with Arduino compatible shields.

Standalone Usage

To use the CYBT-483056-EVAL:

1) Configure the evaluation board headers/switches to the desired settings

2) Connect the evaluation board to a PC via a USB cable

3) Open the ModusToolbox™, develop your application, program and test

Optional Usage with Arduino Shield

Arduino compatible shields can be connected through the Arduino compatible headers (J3/J4/J6/J7) to provide additional I/O connections and functionality.

Kit Contents

1 X EZ-BT Module Arduino Evaluation Board (CYBT-483056-EVAL) with on-board EZ-BT WICED™ Module (CYBT-483056-02)

1 X USB Cable

The Infineon CYW920835M2EVB-01 Evaluation kit enables you to evaluate and develop single-chip Bluetooth® Low Energy applications using the AIROC™ CYW20835, an ultra-low-power Bluetooth® LE 5.4 system on a chip.

The CYW20835 is a stand-alone baseband processor with an integrated 2.4 GHz transceiver supporting Bluetooth® LE. The CYW20835 employs high integration to reduce external components, thereby minimizing the device’s footprint and cost. This kit helps evaluate device functionality and develop applications quickly for faster time-to-market.

The CYW20835 device and this evaluation kit are supported in ModusToolbox™ 3.0 and the Bluetooth® SDK 3.0 (or later). To learn more about ModusToolbox™ and download the latest version of the Bluetooth® SDK, please visit the Bluetooth® SDK community page.

Kit Features

• 60-QFN CYW20835 Bluetooth Low Energy 5.4-compliant wireless MCU
• On-board sensors – an ambient light sensor, thermistor, footprint for analog microphone, and footprint for Infineon digital microphone
• User switches and LEDs
• USB connector for power, programming and USB-UART bridge

Kit Contents

• CYW9BTM2BASE1 base board
• CYW920835M2IPA1 Bluetooth radio card (mounted onto base board)
• USB Standard-A to Micro-B cable

AIROC™ CYBLE-343072-EVAL-M2B Bluetooth® LE Module Evaluation Kit

The Infineon AIROC™ CYBLE-343072-EVAL-M2B Bluetooth® LE Module Evaluation Kit enables evaluation, prototyping, and development of a wide array of IoT applications based on the AIROC™ CYBLE-343072-02 globally-certified module. AIROC™ CYBLE-343072-02 is a 2.4GHz Bluetooth Transceiver Module with an Integrated Trace antenna and is based on the AIROC™ CYW20835 system on a chip (SoC), an ultra-low-power Bluetooth® LE 5.2 device. This kit supports home automation, sensors (medical, home, security, and industrial), lighting, Bluetooth® Mesh, or any Bluetooth® connected IoT application and can be used for rapid development while reducing time-to-market.

AIROC™ CYBLE-343072-EVAL-M2B Bluetooth® LE Module Evaluation Kit is supported in the AIROC™ Bluetooth® SDK v3.2 or later within ModusToolbox™ Software and Tools with many code examples and documentation enablement for Bluetooth® LE and Bluetooth® Mesh use cases. To learn more about ModusToolbox™ and download the latest version of the Bluetooth® SDK, please visit the Bluetooth® SDK community page.

Kit Features

AIROC™ CYBLE-343072-EVAL-M2B Bluetooth® LE Module Evaluation Kit features:

• An evaluation board that can support various Bluetooth protocols including Generic Access Profile (GAP), Generic Attribute Profile (GATT), MESH, Find Me profile (FMP), HID Over GATT (HOGP), Health Thermometer Profile (HTP) and Proximity Profile (PXP)
• Eval board with integrated serial flash
• Input/output interfaces for communications and programming
• External headers for debugging and connectivity
• Interfaces to USB power or to a coin cell
• Integrated trace Antenna and PA/LNA
• 24MHz crystal oscillator

Kit Contents

• 1 X Module Arduino Evaluation Board (CYBLE-343072-EVAL-M2B) with on-board AIROC™ Module (CYBT-343072-02)
• 1 X USB Cable for USB – UART programming
• Convenient user buttons

The Infineon CYW920822M2P4TAI040-EVK Evaluation kit enables you to evaluate and develop Bluetooth® applications using the AIROC™ CYW20822M2P4TAI040, an ultra-low-power Bluetooth® LE module.

The AIROC^TM CYW20822–P4TAI040 module offers seamless integration, enhanced performance with Bluetooth® Low-Energy Long-Range (LE-LR) support, and exceptional reliability for a wide range of applications. With the right combination of low power and high performance, CYW20822–P4TAI040 is designed to support the entire spectrum of Bluetooth® LE-LR use cases including Industrial IoT applications, Smart home, Asset tracking, Beacons and Sensors, and Medical devices.

The CYW20822–P4TAI040 is pre-programmed via the EZ-Serial Firmware, which eliminates need for customer programming, and helps accelerate the time-to-deployment for Bluetooth®-enabled IoT solutions.

Kit Contents

1. 2 x CYW9BTMDM2BASE1 baseboard
2. 2 x CYW920822M2P4TAI040 Bluetooth® radio card (connected to the baseboard using the M.2 connector)
3. 2 x USB standard-A to Micro-B cable
4. Quick start guide

Kit Features

• AIROC™ CYW20822–P4TAI040 module
• Arduino compatible headers for hardware expansion
• User switches and LEDs
• USB connector for power, programming and USB-UART bridge

Resources

CYW20822-P4TAI040

CYW20822-P4xxI040-EZ_SERIAL-FW-V1.4.1.0.zip

Infineon DevTools

EZ-PD™ Barrel Connector Replacement (BCR) PLUS evaluation kit CY4534

The CY4534 EZ-PD™ Barrel Connector Replacement Plus (BCR-Plus) EVK is an evaluation platform for customers who want to replace an existing barrel/power input connector with a USB-C connector. Implementing this solution in an end-product allows the system to be powered by any USB-C compliant power adapter.

A device such as a speaker, shaver, power tool, modem, etc. that use a barrel connector for power will benefit from using a universal power interface such as USB Type-C. To make the transition easier, the EZ-PD™ BCR-PLUS EVK CY4534 provides a USB Type-C receptacle to consume power from a charger and then supply it over a terminal block. A barrel connector can be attached to this block by using wires to convert a barrel input to USB Type-C.

The CY4534 EZ-PD™ BCR-PLUS evaluation kit ships with pre-programmed firmware with functionality as documented in the CYPD3176 device datasheet. As an additional option, customers who prefer further customization of the BCR-PLUS firmware solution can make changes to the configuration parameters using the EZ-PD™ configuration utility to fit the needs of their end-application.

Summary of Features

• Supports USB Type-C and power delivery 3.0 programmable power supply
• Supports 2.4 A charging
• UFP-only with configurable RD and RD-DB
• Integrated analog blocks
• 30 V-tolerant regulator
• V_BUS-to-CC short protection
• On-chip overvoltage protection (OVP)
• Packages: 24-pin QFN
• Supports extended industrial temperature range (-40°C to +105°C)

Benefits

• Replacement of barrel connectors
• USB Type-C and power delivery 3.0 programmable power supply
• SINK OCP

Potential Applications

• Smart speakers
• Consumer devices
• Power tools
• Wearables
• Personal care products
• VR headset
• Gaming consoles
• Cameras
• IoT devices
• Drones & robots

List of Components

• EZ-PD™ BCR - USB Type-C Port Controller
  (CYPD3176-24LQXQ)
• 13V Clamp 3.5 A (8/20µs) Ipp TVs Diode Surface Mount WLL-2-3
  (ESD131-B1-W0201)
• Silicon Schottky Diode 10 V 3 A SOD323-2
  (BAT60A)
• MOSFET 2P-CH 30V 9.2 A 8SOIC
  (IRF9358)
• MOSFET 2P-CH 30V 2 A 6TSOP
  (BSL308PE)
• EZ-USB™ Serial Bridge Controller 24QFN
  (CY7C65211-24LTXI)

EZ-PD™ Barrel Connector Replacement (BCR) LITE evaluation kit CY4535

The CY4535 EZ-PD™ Barrel Connector Replacement Lite (BCR-Lite) EVK is an evaluation platform for customers who want to replace an existing barrel/power input connector with a USB-C connector. Implementing this solution in an end-product allows the system to be powered by any USB-C compliant power adapter.

The EZ-PD™ BCR - CYPD3178 device (and hence the CY4534 EZ-PD™ BCR-PLUS EVK) can be used for USB-C sink or devices that are only capable of accepting power from the following:

• USB Type-C only chargers that are capable of delivering 5 V (up to 3 A) or;
• USB Type-A or Type-C chargers that can operate at 5 V, 9 V, 12 V, 15 V or 20 V using proprietary methods of negotiation over the D+/D- lines.

The CY4535 EZ-PD™ BCR-LITE EVK ships with pre-programmed firmware with functionality as documented in the CYPD3178 device datasheet.

The CYPD3178 device does not support the USB-PD (Power Delivery) protocol unlike the CYPD3177 or CYPD3176 devices. Refer to the CY4533 or EZ-PD™ BCR EVK CY4534 user guides for more details if your application requires USB-PD support.

Summary of Features

• Supports USB Type-C
• Supports 2.4 A charging
• UFP-only with configurable RD and RD-DB
• Integrated analog blocks
• 30 V-tolerant regulator
• V_BUS-to-CC short protection
• On-chip overvoltage protection (OVP)
• Packages: 24-pin QFN
• Supports extended industrial temperature range (-40°C to +105°C)

Benefits

• Barrel Connector Replacement
• USB Type-C
• Sink OCP

Potential Applications

• Smart speakers
• Consumer devices
• Power tools
• Wearables
• Personal care products
• VR headset
• Gaming consoles
• Cameras
• IoT devices
• Drones & robots

List of Components

• EZ-PD™ BCR - USB Type-C port controller
  (CYPD3178-24LQXQ)
• 13V Clamp 3.5A (8/20µs) Ipp TVs Diode Surface Mount WLL-2-3
  (ESD131-B1-W0201)
• Silicon Schottky Diode 10V 3A SOD323-2
  (BAT60A)
• MOSFET 2P-CH 30V 9.2A 8SOIC
  (IRF9358)
• MOSFET 2P-CH 30V 2A 6TSOP
  (BSL308PE)
• EZ-USB™ Serial Bridge Controller IC - 24QFN
  (CY7C65211-24LTXI)

CY4603 HX3 USB 3.0 Hub Development Kit

CY4603 is an easy-to-use Development Kit to evaluate and develop solutions on the USB-IF certified CYUSB331x family of HX3 USB 3.0 hub controllers. This kit comes integrated with the required components to demonstrate application of HX3 for a 4-port USB 3.0 Hub. The kit also includes the Blaster Plus utility, a GUI based Infineon software tool to change the configuration parameters of HX3. This kit also demonstrates the GPIO configurability options available in HX3.

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.

Kit Features

• Configurable GPIOs
• Supports Battery Charging v1.2
• Supports Ghost Charging™
• Configure HX3 using I²C EEPROM or I²C slave mode
• Supports Individual and Ganged Downstream port Power
• 88-pin QFN package

Kit Contents

• Development board (1)
• USB 3.0 A to B cable (1)
• 5V/4A Power Adaptor (1)
• Quick start guide

CY4605 - High-Speed Low-Power USB 2.0 Compliant 2-Port Hub

EZ-USB™ HX2LP(TM) USB 2.0 2-Port Hub

Infineon offers a complete reference design for developing a fixed-function, low-power 2-port USB 2.0 hub that is production ready.

Key Features

• Compliance with USB 2.0
• 480/12/1.5-Mbps operation
• Low-power operation for bus-powered applications
• Fit/Form/Function Compatible with CY7C65640 & CY7C65640A TetraHub(TM)
• 8x8mm 56-lead QFN (quad flat no-lead) package
• Integrated components for lower BOM cost
• Individual or ganged port power switching and over current detection
• Dedicated LED ports

Hardware Description

The EZ-USB™ HX2LP(TM) reference design kit includes:

• CY7C65620-based demonstration unit
• 5 VDC, 2.5A wall power supply
• USB cable
• Datasheet
• Design & Application Notes
• Hardware files
• Schematics
• Bill of Materials
• Gerber and OrCAD source files

CY4608 HX2VL Very Low-Power USB 2.0 Compliant 4-Port Hub Development Kit

CY4608 HX2VL(TM) USB 2.0 4-Port Hub

Infineon offers a complete development kit for developing a fixed-function, very low-power 4-port USB 2.0 hub that is production ready and USB-IF compliant.

Key Features

• Compliance with USB 2.0 specification.
• 480/12/1.5-Mbps operation
• Very Low-power consumption
• Highly integrated solution for reduced BOM cost
• Supports Internal or External Voltage regulation
• Space Saving 5x5mm 28-pin QFN package.
• Maximum configurability using EEPROM programming.
• Individual or ganged port power switching and over current detection.

Hardware Description

The CY4608 HX2VL Development Kit Box includes:

• CY7C65632-based USB 2.0 4-port Hub Board.
• 5 VDC, 2.5A wall power supply
• USB cable (A-B).
• Quick Start Guide booklet.

CY4613 HX3 USB 3.0 Shared Link Development Kit

CY4613 is a development kit to evaluate and develop solutions with CYUSB332x family of HX3 USB 3.0 hub controllers. The kit demonstrates HX3’s Shared Link feature in a 6 port configuration and also supports ACA-Dock functionality. This kit comes integrated with the required components and the Blaster Plus software utility. Blaster Plus is a GUI based Infineon software tool to change the configuration parameters of HX3.

Kit Features

• Supports Shared Link
• Supports ACA-Dock
• Supports Battery Charging v1.2
• Supports Ghost Charging
• Configure HX3 using I²C EEPROM or I²C slave mode
• Supports Individual Downstream port Power Control
• 88-pin QFN package

Kit Contents

• Development board (1)
• USB 3.0 A to Micro-B cable (1)
• 12V/3A Power Adaptor with 4 types of plugs (1)
• Quick start guide
• USB 2.0 Micro-B to Micro-B cable (1)
• Jumpers (5)

CY7110 EZ-PD™ PMG1-S0 prototyping Kit

The CY7110 EZ-PD™ PMG1-S0 prototyping kit is a development platform to design products which can be powered from a high-voltage USB PD port, and also need a microcontroller to implement additional features. This platform is compliant with the USB PD 3.0 protocol and can support up to 100 W (20 V, 5 A) of power consumption.

Featuring the EZ-PD™ PMG1-S0 microcontroller

The CY7110 EZ-PD™ PMG1-S0 prototyping kit is based on the EZ-PD™ PMG1-S0 microcontroller (CYPM1011-24LQXI). This is an ARM® Cortex®-M0 based controller with 64-KB flash and 8-KB SRAM. It implements a complete Type-C USB-PD transceiver and supports 12 GPIOs of which, some of them can be re-purposed to support SCB (serial communication block) functions such as I2C, UART & SPI.

Flexible prototyping

The CY7110 EZ-PD™ PMG1-S0 prototyping Kit provides easy access to all the I/Os of the PMG1-S0 microcontroller in a breadboard-compatible format.

The kit includes Infineon's KitProg programmer and debugger. KitProg can program and debug the target PMG1-S0 microcontroller via SWD using ModusToolbox™ or Infineon programmer. KitProg also supports USB-UART bridge and USB-I2C bridge features.

The kit design allows users to snap-off the KitProg from the EZ-PD™ PMG1-S0 board and use them independently.

Supported software

Application development on CY7110 EZ-PD™ PMG1-S0 prototyping Kit can be done using ModusToolbox™. ModusToolbox™ is a set of multi-platform development tools and a comprehensive suite of GitHub-hosted firmware. The development tools include Eclipse based IDE, configurators and programming tools. The firmware includes PDL (peripheral drivers), middleware including USB PD stack and example projects.

Kit contents

• CY7110 EZ-PD™ PMG1-S0 prototyping board
• Quick start guide

CY7111 EZ-PD™ PMG1-S1 Prototyping Kit

The CY7111 EZ-PD™ PMG1-S1 prototyping kit is a development platform to design products which can be powered from a high-voltage USB PD port, and also need a microcontroller to implement different features. This platform is compliant with the USB PD 3.0 protocol and can support up to 100 W (20 V, 5 A) of power consumption.

Featuring the EZ-PD™ PMG1-S1 microcontroller

The CY7111 EZ-PD™ PMG1-S1 prototyping kit is based on the EZ-PD PMG1-S1 microcontroller (CYPM1111-40LQXI). This is an ARM® Cortex®-M0 based controller with 128-KB flash and 12-KB SRAM. It implements a complete Type-C USB-PD transceiver and supports 17 GPIOs of which, some of them can be re-purposed to support SCB (serial communication block) functions such as I2C, UART & SPI.

Flexible prototyping

The CY7111 EZ-PD™ PMG1-S1 prototyping Kit provides easy access to all the I/Os of the PMG1-S1 microcontroller in a breadboard-compatible format.

The kit includes Infineon's KitProg programmer and debugger. KitProg can program and debug the target PMG1-S1 microcontroller via SWD using ModusToolbox™ or Infineon programmer. KitProg also supports USB-UART bridge and USB-I2C bridge features.

The kit design allows users to snap-off the KitProg from the EZ-PD™ PMG1-S1 board and use them independently.

Supported software

Application development on CY7111 EZ-PD™ PMG1-S1 prototyping Kit can be done using ModusToolbox. ModusToolbox™ is a set of multi-platform development tools and a comprehensive suite of gitHub-hosted firmware. The development tools include Eclipse based IDE, configurators and programming tools. The firmware includes PDL (peripheral drivers), middleware including USB PD stack and example projects.

Kit contents

• CY7111 EZ-PD™ PMG1-S1 prototyping Board
• Quick start guide

CY7112 EZ-PD™ PMG1-S2 Prototyping Kit

The CY7112 EZ-PD™ PMG1-S2 prototyping kit is a development platform to design products which can be powered from a high-voltage USB PD port, and also need a microcontroller to implement different features. This platform is compliant with the USB PD 3.0 protocol and can support up to 100 W (20 V, 5 A) of power consumption.

Featuring the EZ-PD™ PMG1-S2 microcontroller

The CY7112 EZ-PD™ PMG1-S2 prototyping kit is based on the EZ-PD™ PMG1-S2 microcontroller (CYPM1211-40LQXI). This is an ARM Cortex-M0 based controller with 128-KB flash and 8-KB SRAM. It implements a complete Type-C USB-PD transceiver and supports 20 GPIOs of which, some of them can be re-purposed to support SCB (serial communication block) functions such as I2C, UART & SPI.

Flexible prototyping

The CY7112 EZ-PD™ PMG1-S2 Prototyping Kit provides easy access to all the I/Os of the PMG1-S2 microcontroller in a breadboard-compatible format.

The kit includes Infineon's KitProg programmer and debugger. KitProg can program and debug the target PMG1-S2 microcontroller via SWD using ModusToolbox™ or Infineon Programmer. KitProg also supports USB-UART bridge and USB-I2C bridge features.

The kit design allows users to snap-off the KitProg from the EZ-PD™ PMG1-S2 board and use them independently.

Supported software

Application development on CY7112 EZ-PD™ PMG1-S2 prototyping kit can be done using ModusToolbox. ModusToolbox™ is a set of multi-platform development tools and a comprehensive suite of gitHub-hosted firmware. The development tools include Eclipse based IDE, configurators and programming tools. The firmware includes PDL (peripheral drivers), middleware including USB PD stack and example projects.

Kit contents

• CY7112 EZ-PD™ PMG1-S2 prototyping board
• Quick start guide

CYUSB3KIT-004 EZ-USB™ SX3 SuperSpeed explorer kit

The CYUSB3KIT-004 explorer kit (DVK) is based on EZ-USB™ SX3 family configurable SuperSpeed USB peripheral controllers. It has a fully configurable general interface that can interface with any processor, ASIC, image sensor, or field programmable gate array (FPGA).

The kit provides an easy and effortless connectivity to popular industry interfaces such as synchronous slave FIFO, asynchronous SRAM, asynchronous and synchronous address data multiplexed interfaces, and image sensor interfaces.

Key features

• Video streaming up to 1080p @30fps in YUV format from onboard image sensor module
• Audio stream from onboard L/R digital MEMS microphones
• USB bus-powered operation
• External off-the-shelf MIPI camera interface from Raspberry Pi
• Compatible with FX3 explorer kit interconnect boards
• Onboard regulators
• Firmware-controlled LED and user switch
• GPIO headers

Easy connectivity

The EZ-USB™ SX3 explorer kit combines hardware, software, and documentation that enable customers to evaluate the SX3 device. This user guide describes the steps to install the software required by the SX3 explorer kit and to operate the development board provided with the kit.

Kit contents

The CYUSB3KIT-004 EZ-USB™ SX3 explorer DVK consists of the following:

• SX3 baseboard
• Camera add-on board
• Superspeed USB-C cable
• Hard copy of quick start guide
• Kit casing
• Foam
  

The following items may be required for developing applications with this kit. Note that the following are not included in the kit:

• Off-the-shelf (OTS) MIPI camera module - MPN# 410-358 from Raspberry Pi
• 22-pin to 15-pin ribbon cable (CAB0306)
• FX3 explorer kit interconnect boards from Altera and Xilinx

Block diagram

CYUSB3ACC-007 CPLD Accessory Board for the EZ-USB™ FX3 SuperSpeed Explorer Kit

The CYUSB3ACC-007 CPLD accessory board is designed to work with the GPIF II (general programmable interface) of the EZ-USB™ FX3 SuperSpeed Explorer Kit (CYUSB3KIT-003). It is meant to be used for the examples mentioned in the book "SuperSpeed device design by example", by John Hyde.

For any questions regarding this board, please contact us here.

F-RAM Development Kit

Develop with EXCELON™ Ultra F-RAM – The industry’s highest-performance mission-critical data-logging memory

The CY15FRAMKIT-002 kit is an easy-to-use and inexpensive development kit for evaluating Infineon’s new high-performance EXCELON™ Ultra QSPI F-RAM. The development kit offers the following key features:

• On-board 4-Mbit (512Kx8), EXCELON Ultra Quad SPI F-RAM with 1.8V to 3.6V operating voltage
• Compatible with ST NUCLEO-L433RC-P MCU Evaluation Board for SPI and QSPI mode operation
• Offers Morpho headers for QSPI evaluation using ST NUCLEO-L433RC-P MCU Evaluation Board
• Compatible with any Arduino UNO R3 compatible boards for SPI mode operation
• Operational with 1.8-V or 3.3-V power supply
• Example Project to evaluate SPI and QSPI mode operation in ST NUCLEO-L433RC-P MCU

ST Nucleo Kit support

The CY15FRAMKIT-002 kit has been designed to operate with the ST NUCLEO-L433RC-P MCU Evaluation Board shown below. Morpho headers enable QSPI mode evaluation using the ST NUCLEO-L433RC-P MCU Evaluation Board.

Arduino support

The CY15FRAMKIT-002 kit has been designed to operate with any board compatible with Arduino UNO R3.

Kit contents

The CY15FRAMKIT-002 kit includes:

• CY15FRAMKIT-002 Kit Board
• Quick Start Guide
• Arduino Stackable Headers for connector expansion

EZ-PD™ Barrel Connector Replacement (BCR) evaluation kit CY4533

The EZ-PD™ Barrel Connector Replacement (BCR) kit CY4533 is an evaluation platform for customers who want to replace an existing barrel/power input connector with a USB-C connector. Implementing this solution in an end-product allows the system to be powered by any USB-C-compliant power adapter.

The EZ-PD™ BCR CYPD3177 device (and hence the EZ-PD™ BCR EVK CY4533) can be used for USB-C sink or devices that are only capable of accepting power from the following:

• USB Type-C only chargers that are capable of delivering 5 V (up to 3 A) or;
• USB Type-C chargers with USB-PD that can operate at 5 V, 9 V, 12 V, 15 V or 20 V.

The EZ-PD™ BCR EVK CY4533 ships with pre-programmed firmware with functionality as documented in the CYPD3177 device datasheet.

The CYPD3177 device support the USB-PD (Power Delivery) protocol.

Summary of Features

• Supports USB Type-C and USB-PD
• UFP-only with configurable RD and RD-DB
• Integrated analog blocks
• 30 V-tolerant regulator
• V_BUS-to-CC short protection
• On-chip overvoltage protection (OVP)
• Packages: 24-pin QFN
• Supports extended industrial temperature range (-40 °C to +105 °C)

Benefits

• Barrel Connector Replacement
• USB Type-C

List of components

• EZ-PD™ BCR - USB Type-C port controller
  (CYPD3177-24LQXQ)
• 13 V Clamp 3.5A (8/20µs) Ipp TVs Diode Surface Mount WLL-2-3
  (ESD131-B1-W0201)
• Silicon Schottky Diode 10 V 3 A SOD323-2
  (BAT60A)
• MOSFET 2P-CH 30V 9.2 A 8SOIC
  (IRF9358)
• MOSFET 2P-CH 30 V 2 A 6TSOP
  (BSL308PE)

Potential Applications

• Smart speakers
• Consumer devices
• Power tools
• Wearables
• Personal care products

PSoC™ 6 Wi-Fi BT Prototyping Kit (CY8CPROTO-062-4343W)

PSoC™ 6 Wi-Fi BT Prototyping Kit (CY8CPROTO-062-4343W) is a low cost hardware evaluation platform for rapid prototyping of applications based on the PSoC™ 62xA, PSoC™ 62x8, PSoC™ 61xA, PSoC™ 61x8 MCU product families. The kit also includes a wireless module based on the AIROC™ CYW4343W combo device to develop cloud connected IoT applications.

Kit Features

• Featuring the PSoC™ 62xA MCU - Ultra low power, high performance MCU based on the dual core CPU (Arm^® Cortex^®-M4 and Arm^® Cortex^®-M0+), 2048 KB of on-chip Flash, 1024 KB of SRAM, Quad-SPI external memory interface, built-in hardware and software security features, rich analog, digital, and communication peripherals
• Base Features – PSoC™ 62xA MCU (OPN: CY8C624ABZI-S2D44), AIROC™ CYW4343W device supporting Single-band Wi-Fi 4 (802.11n) + Bluetooth combo, Integrated Programmer / Debugger (KitProg3), User LEDs(1), Push buttons(1), KHz/MHz crystal
• Additional Features – CAPSENSE™ slider(5-segment), CAPSENSE™ buttons(2), Infineon Quad SPI NOR flash (512-Mbit), PDM Microphones(2), Thermistor, USB-FS Device I/F (PSoC™ 6), microSD Card Slot
• Hardware Expansion Features - Digilent Pmod™ headers, Extended IO headers, Program/Debug Header
• Software Support - ModusToolbox™ software
• Board Support Package - TARGET_CY8CPROTO-062-4343W
• Code Examples available at Infineon’s GitHub Repository
• Applicable Product families - PSoC™ 62xA, PSoC™ 62x8, PSoC™ 61xA, PSoC™ 61x8

Kit Contents - PSoC™ 6 Wi-Fi BT Prototyping Board, USB Type-A to Micro-B cable, Quick Start Guide (on kit package)

Evaluation board featuring the IR38063 a 600kHz, 25A SupIRBuck synchronous buck converter

Benefits

• PV_in = +12 V (+ 13.2 V Max), No V_cc required
• V_out = +1.2 V at 0-25 A
• Fs = 600 kHz
• L = 0.215 uH
• C_in = 4x22 uF (ceramic 1206) + 1x330 uF (electrolytic, optional)
• C_out =7x47 uF (ceramic 0805)

Potential Applications

• DC-DC

Evaluation board featuring the IR38064 - 600kHz, 35 A SupIRBuck synchronous buck converter

• PV_IN = +12 V (+ 13.2 V Max), No V_CC required
• V_OUT = +1.2 V at 0-35 A
• Fs= 600 kHz
• L= 0.150 uH
• C_IN= 4x22 uF (ceramic 1206) + 1x330 uF (electrolytic, optional)
• Cout=10x47 uF (ceramic 0805)