The Guidense TDR100 is a guided wave radar (GWR) for continuous level measurement and point level detection in liquids and solids, with active analog and digital control output. Mechanical installation has almost no restrictions and can be done easily. Due to its relatively small G3/4" process connection thread, the Guidense can be mounted at nearly any existing tank nozzle. Configuration of the TDR100 isn't any harder. Easy configuration can be done by your own crew instead of expensive service engineers.
The Guidense TDR100 uses Time Domain Reflectometry technology: low-energy, high-frequency electromagnetic impulses, generated by the sensors circuitry, are propagated along the probe which is immerged in the liquid or solid to be measured. When these impulses hit the surface of the media, part of the impulse energy is reflected back up the probe which then calculates the level from the time difference between the impulses sent and the impulses reflected.

Features

• Accurate continuous level measurement and reliable point level detection in one device.
• Reliable measurements even in changing process conditions.
• Highly robust measurement, innovative signal analysis and disturbance signal suppression.
• Best price-performance ratio in the market.
• 3 Probe types: single rod probe, wire rope probe and a coaxial probe.
• Measuring range: 100 to 20.000mm.
• Fastest reaction time with 0,5 sec in the market for smallest vessels / tanks.
• No influences caused by tank / vessel internals.
• Power requirements: 12 to 30VDC.
• Accuracy of +/-3mm or 0.03% of measured distance.
• Resistant to harsh environments with IP68/NEMA6P enclosure.
• Explosion proof according ATEX for hazardous areas available on request.
• Smallest inactive areas in the market.
• Fully compatible with the popular Fluidwell F-Series and D-Series level indicators and monitors.
• Complete galvanic insulation of device electronics from its inputs/outputs and the tank potential.
• User-friendly installation and configuration by your own technicians, saving cost on service engineers.
• Applicable in nearly every type of process and storage tank application.

The Triflex LNI 200 is designed to measure the level on the outside of a non-metallic tank without physical contact with the product. The LNI 200 incorporates the unique FTC technology (Field Time Control). This is a new innovative technology where an electric field is generated between a transmitting electrode and multiple receiving electrodes. The cycle time of the FTC level sensor changes as soon as a product intervenes this electric field. Multiple advanced receiver circuits are embedded to detect the level of low dielectric material, like bulk solid material or dry food products. The Triflex LNI 200 transmitter does not require moving parts or product contact that may be subject to failure situations. Applications with a sensor with FTC Technology provide a more reliable and cost effective solution.

Features

• The ability to detect weak signals coming from low dielectric products.
• Save time and costs in easy installation:
  -Single button setup.
  -No tank nozzles required.
• New FTC technology.
• Non-intrusive installation, no risks of leakage or overspill.
• Virtually no maintenance, no moving parts.
• Easy access maintenance without shutting down your processes, save time and costs!
• Fault detection according to Namur NE43 for fast error solving.
• Auto calibration, unaffected by product quality changes: reliable results ALL the time.
• Sensor status indication for easy reference.

The Triflex LNI 250 is designed to measure the level on the outside of a non-metallic tank without physical contact with the product. The LNI 250 incorporates the unique FTC technology (Field Time Control). This is a new innovative technology where an electric field is generated between multiple transmitting electrodes and a receiving electrode. The cycle time of the FTC level sensor changes as soon as a product intervenes this electric field. Multiple electrodes are embedded to detect the level of relative high dielectric material (εv ≥ 4). The Triflex LNI 250 transmitter does not require moving parts or product contact that may be subject to failure situations. Applications with a sensor with FTC Technology provide a more reliable and cost effective solution.

Features

• Save time and costs in easy installation:
  -Single button setup.
  -No tank nozzles required.
• New FTC technology.
• Non-intrusive installation, no risks of leakage or overspill.
• Virtually no maintenance, no moving parts.
• Easy access maintenance without shutting down your processes, save time and costs!
• Fault detection according to Namur NE43 for fast error solving.
• Auto calibration, unaffected by product quality changes: reliable results ALL the time.
• Sensor status indication for easy reference.