Register for this Webinar
On-Demand Webinar:

Tips and Tricks on Using an Oscilloscope to Verify Control Loop Stability

This webinar covers measuring the control loop stability of switch-mode power supplies to achieve an excellent performance and to get confidence in the design. We will discuss the main measurement concept and describe the measurements from a pragmatist’s point of view. Presenting proper measurement setups and advising key solution differentiators complete this discussion on verifying control loop stability.


Date: April 1, 2020
Time: 10 AM EDT (7 AM PDT / 4:00 PM CEST)
Duration: 1 hour
Presented by:

Overview

This webinar covers measuring the control loop stability of switch-mode power supplies to achieve an excellent performance and to get confidence in the design. We will discuss the main measurement concept and describe the measurements from a pragmatist's point of view. Presenting proper measurement setups and advising key solution differentiators complete this discussion on verifying control loop stability.

Key Takeaways

  • Gain insight into key parameters related to measuring control loop stability
  • Learn about oscilloscopes from Rohde & Schwarz
  • Understand the right probing technique
  • Gain insight into primary applications for the technique

Speakers

Andreas Ibl, Product Manager Oscilloscopes, Rohde & Schwarz

Andreas holds a Master's degree in Engineering Management with a focus on electronics from the University of Applied Sciences in Landshut Germany. He is product manager at Rohde & Schwarz where he is responsible for oscilloscopes. In addition to control loop stability, he also focused on power integrity and multi-domain analysis.

Marcus Sonst, Application Development Engineer, Rohde & Schwarz

Marcus holds a Master's degree in Electrical Engineering with a focus on power / energy from the University of Applied Sciences in Dortmund Germany.

He has more than 20 years of experience with development, design, and test of power supplies and electronic ballasts. He currently is Application Development Engineer at Rohde & Schwarz, responsible for power management and power electronics testing with focus on time domain measurements.