-
Description: TESCOM™ 44-4200 Series is a high pressure, dome loaded, pressure reducing regulator, with Cv = .80 or 2.0 available; rated up to 6000 PSIG [415 bar] inlet and 5000 PSIG [345 bar] outlet. Ideal for use in fire suppression equipment and CNG filling.
- Valve Size: 0.25 to 0.75 inch
- Flow (Cv): 2
- Pressure Rating: 6,000 psi
- Media Temperature: -65 to 165 F
-
Description: TESCOM™ 26-1200 Series dome loaded, high flow pressure reducing regulator is externally loaded with 6000 PSIG [413 bar] maximum inlet and outlet pressures. The 26-1200 Series offers three orifice sizes and Cv ratings, balanced main valve and available external sensing.
- Valve Size: 0.75 to 1.25 inch
- Flow (Cv): 6
- Pressure Rating: 6,000 psi
- Media Temperature: -65 to 165 F
-
Description: TESCOM™ CP3200 Series self-contained pilot-operated high flow, high pressure dome-loaded regulator is designed for gas flows to 1200 SCFM. Ideal for use in laser assist and resonator gases, and tank purging.
- Valve Size: 0.5 inch
- Flow (Cv): 1
- Pressure Rating: 3,000 psi
- Media Temperature: 0 to 250 F
-
-
Description: TESCOM™ DH-Series single stage regulator provides a compact size with high flow capability from 5-200 SCFM [141-5663 SLPM]. The large diaphragm and balanced main valve design provide low droop (larger usable flow range) than competitive designs. Available in spring or
- Valve Size: 0.5 to 1 inch
- Flow (Cv): 5
- Pressure Rating: 300 psi
- Media Temperature: -20 to 165 F
-
Supplier: Equilibar, LLC.
Description: loaded back pressure regulators to achieve high precision in the low pressure range. The LPR2 series low pressure regulator is also frequently used by itself to directly and precisely control very low pressures.
- Valve Size: 0.25 inch
- Pressure Rating: 0 to 30 psi
- Number of Ports/Ways: 3
- Port Size: 0.25 inch
-
Supplier: Equilibar, LLC.
Description: Electronic Pressure Regulator (EPR) Series Control Pressure from vacuum through 1000psi Precision QPV/MPV models use high resolution proportional solenoid valves Use stand alone or as a pilot regulator for Equilibar dome loaded back pressure regulators Many custom
- Valve Size: 0.125 inch
- Pressure Rating: 0 to 150 psi
- Number of Ports/Ways: 3
- Number of Positions: 3
Find Suppliers by Category Top
More Information Top
-
Basics of Pressure Regulation
In the example in Figure 9, a 26-1200 Series dome loaded regulator is connected to a 26-1000 Series venting regulator.
-
Folder 1: technical proposal. Design of long-life, space-maintainable nuclear stage regulators and shutoff valves. To George C. Marshall Space Flight Cent...
DOME LOADED REGULATOR RANGE .
-
Flow Friction Fire History and Research
FIG. 3— Dome loaded regulator , post-fire.
-
Design and Development of the Texas Tech Fuel Cell Powered FutureTruck
In addition, a separate air line is sent to the Dome Loaded Regulator , where the pressure of the hydrogen is matched to that of the oxygen.
-
Peripheral Systems for a Fuel Cell Powered Vehicle
In addition, a separate air line is sent to a dome loaded regulator , where the pressure of the hydrogen is matched to that of the oxygen.
-
A demountable, gas-balanced autoclave with chemically inert reaction vessel
Differential pressure gauge & 2 x 105Pa Bursting disc assembly Dome loaded regulator .
-
Cold Start Fuel Economy and Power Limitations for a PEM Fuel Cell Vehicle
Modeling the dome loaded regulator required the assumption that the hydrogen flow and pressure could be met at all times, and the system model did not utilize recirculation, but rather “dead headed” the fuel cell stacks (the same net effect of recirculation).
-
Oxygen Content Variation in “Zero” Grade Air Due to Production, Treatment and Distribution
The system under test is a very simple combination of a two piston, 200 slpm, 1034 kPa oil-less compressor and 70 liter accumulator (ACC) in series with a high flow (Cv=5.0) dome loaded regulator as shown in Figure 2.
-
http://repositories.lib.utexas.edu/bitstream/handle/2152/10639/wagnerj45960.pdf?sequence=2
Dome Loaded Regulator .
-
Suitability of compressed air energy storage technology for electricity utility standby power applications
A 0-10V signal is then sent to an electro-pneumatic regulator that pilots a dome loaded regulator .
Indicates content that may require registration and/or purchase.