-
Supplier: CiMa-Pak Corporation
Description: The Infrared shrink tunnel does not circulate hot air, rather it radiates heat enough to shrink bands onto containers or film around packages. Shrinks polyolefin and polyethylene Heat on all 4 sides Infrared replaceable tubes Adjustable temp.
- Machine Type: Shrink Machines
-
Supplier: Eraser Company, Inc.
Description: Ideal for many applications including heat shrinking, plastic tube bending, soldering, adhesive curing, solder preforms, butt welding and more. Glo-Rings incorporate quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at
- AC Voltage Required: 220 to 240 volts
- Fuel / Energy Source: Electric
- Heater Type: Radiant Heater
- Heating Capacity: 0.2200 to 0.5500 kW
-
Supplier: Eraser Company, Inc.
Description: Ideal for many applications including heat shrinking, plastic tube bending, soldering, adhesive curing, solder preforms, butt welding and more. Glo-Rings incorporate quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at
- AC Voltage Required: 110 volts
- Fuel / Energy Source: Electric
- Heater Type: Radiant Heater
- Heating Capacity: 0.2300 to 0.3800 kW
-
-
Supplier: Eraser Company, Inc.
Description: Ideal for many applications including heat shrinking, plastic tube bending, soldering, adhesive curing, solder preforms, butt welding, etc. Glo-Rings incorporate quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at
- AC Voltage Required: 115 volts
- Fuel / Energy Source: Electric
- Heater Type: Radiant Heater
- Heating Capacity: 0.6600 to 1.08 kW
-
Supplier: Eraser Company, Inc.
Description: Ideal for many applications including heat shrinking, plastic tube bending, soldering, adhesive curing, solder preforms, butt welding, etc. Glo-Rings incorporate quartz encapsulated heating elements which open and close to encircle work pieces with instant radiant heat at
- AC Voltage Required: 220 to 240 volts
- Fuel / Energy Source: Electric
- Heater Type: Radiant Heater
- Heating Capacity: 0.1950 to 0.4400 kW
-
Supplier: Northrop Grumman Corporation
Description: The Northrop Grumman-built Defense Support Program (DSP) satellites have been the spaceborne segment of NORAD's Tactical Warning and Attack Assessment system since 1970. Using infrared detectors that sense the heat from missile plumes against the earth background, these orbiting
-
Supplier: SAE International
Description: Nondestructive tests are those tests which detect factors related to the serviceability or quality of a part or material without limiting its usefulness. Material defects such as surface cracks, laps, pits, internal inclusions, bursts, shrink, seam, hot tears, and composition analysis can be
-
Supplier: SAE International
Description: Nondestructive tests are those tests which detect factors related to the serviceability or quality of a part or material without limiting its usefulness. Material defects such as surface cracks, laps, pits, internal inclusions, bursts, shrink, seam, hot tears, and composition analysis can be
Find Suppliers by Category Top
Conduct Research Top
-
Infrared Imaging to Measure Cigarette Smoking Induced Vasoconstriction Effects
Scientifically proven adverse health effects of cigarette smoking include increased risks for lung and bronchial cancer and raised LDL (bad) cholesterol blood values. Plus, smoking also increases adrenalin which, in turn, is responsible for vasoconstriction (shrinking of blood vessels), resulting
More Information Top
-
Scientific.Net: Materials Science
Abstract:In order to study the control problem of infrared heating shrinkage machine, i.e. Large delay,nonlinearity of the control system, one type of...
-
Microscopic and Spectroscopic Evaluation of Inactivation of Staphylococcus aureus by Pulsed UV Light and Infrared Heating
It was also noted that the cytoplasmic membrane shrunk upon infrared heat treatment, and the damage to the cytoplamic membrane was also observed (Fig. 3d and f).
-
Investigation of Staphylococcus aureus Inactivation by Pulsed UV-light and Infrared Heating Using Micro-spectrometry and Transmission Electron Microscopy
It was also noted that the cytoplasmic membrane shrunk upon infrared heat treatment, and damage to the cytoplamic membrane was also observed (Figure 3D and Figure 3F).
-
Infrared Heat Tool
It is a hand-held, lightweight tool that uses infrared heat to penetrate and shrink tubings.
-
Intermediate Robot Building
Cover the sides and bottoms (again, not the tops) of the infrared LEDs with black heat - shrink tubing.
-
The relaxation behavior of amorphous PET in global chain orientation but nearly random segmental orientation (GOLR) state
In this paper, the relaxation behaviors of amorphous poly(ethylene terephthalate) (PET) film in GOLR state are studied by optical birefringence (∆n), infrared dichroism as well as heat shrinkage .
-
Lasers and optics in health care
One approach relies on the use of an Ho:YAG infrared laser to heat and controllably shrink portions of the cornea outside the central visual field, avoiding the haze problem.
-
Rapid Prototyping of Digital Systems
The LEDs can be outfitted with short heat - shrink tubes to better direct the infrared light forward.
-
Rapid Prototyping of Digital Systems
The LEDs can be outfitted with short heat - shrink tubes to better direct the infrared light forward.
Indicates content that may require registration and/or purchase.