Technical Articles
Brush Research Manufacturing Co., Inc. has published these technical articles:
From this Article:
A flexible surface deburring/finishing tool has improved quality and cut cost
in the honing of burrs created in the manufacture of miniaturized air-driven
liquid pumps. The burrs occur when holes are...
From this Article:
A new surface deburring and finishing tool, has improved quality, and cut
costs in the honing of burrs created during the boring of cylinders in the
manufacture of hermetic and semi-hermetic...
From this Article:
Our first booklet on some common practices in Cylinder Boring, Honing, and Wall Finishing. An educational comparison of various rigid honed and Flex-Honed cylinder wall surfaces. 12 pages....
From this Article:
A leading international manufacturer of outboard engines has developed
a new method of honing the burrs created during the boring of its engines'
cylinders. The new system incorporates a special...
From this Article:
Our fourth booklet. An Introspection of Surface Finish, as is commonly accepted practice, and through profiles and SEM photos exposing the lack of basic quality and inadequacies in the surface...
From this Article:
An extensive study using a Scanning Electron Microscope to examine and compare the results of cylinder honing using rigid hones versus the Flex-Hone® Tool. The booklet examines what the honed...
From this Article:
Servicing the big bore diesel engines
on hard-working container
ships requires fast response as
well as the right training, skills and
tools. For American Diesel, one of
those tools is the portable...
From this Article:
A detailed presentation of several test run engines with performance results of lower blow-by, increased compression, less ring and cylinder wall wear with the Flex-Hone Process. 28 pages....
From this Article:
An updated booklet for the use of Industrial brushes for Deburring, Edge Blending, Radiusing Carbon, Weld, Oxide or Scale Removal, Cleaning, Surface Finishing, Polishing or Roughening. With some...
From this Article:
A leading manufacturer of air valves has developed a new method of
honing burrs created during the molding of the aluminum body for a quickexhaust
valve. The new system incorporates a special...