Technical Articles
Port Plastics, Inc. has published these technical articles:
(Plastic Shapes and Stock)
From this Article:
ANTI-MICROBIAL PLASTIC OFFERS PEACE OF MIND FOR FOOD MANUFACTURERS...
(Plastic Shapes and Stock)
From this Article:
THE CASE FOR ASTM IN NORTH AMERICA!...
(Plastic Shapes and Stock)
From this Article:
Highly engineered plastics play a pivotal role in the CMP process. Plastics are used to secure the wafer and to selectively wear to help control the level and quality of the wafer wear. The materials...
(Plastic Shapes and Stock)
From this Article:
Once you machine an accurate socket and an ultra small array pattern you need a socket that can test over a wide temperature range while holding strict dimensional stability. What good is a perfectly...
(Plastics, Elastomers and Polymers)
From this Article:
ECTFE is a melt processable super performance material with best in class fire safety, a superior surface, ultra purity with full range chemical resistance all while delivering a mechanically tough...
(Plastic Shapes and Stock)
From this Article:
USING POLYMERS INCREASES THE THROUGHPUT. OF NATURAL GAS AND METHANE...
(Plastic Shapes and Stock)
From this Article:
THE TOP FIVE REASONS YOU SHOULD CONSIDER PLASTIC GEARS AND SPROCKETS...
(Plastic Shapes and Stock)
From this Article:
Quality and safety expectations come from today’s consumers and food safety regulatory bodies. As global trade has expanded, Food Processors had to raise their standards. In-line X-ray...
(Plastic Shapes and Stock)
From this Article:
ESD plastic materials are used throughout the Semiconductor process to avoid risk of discharge....
(Plastic Shapes and Stock)
From this Article:
Food Irradiation (the application of ionizing radiation to food) is a technology that improves the safety and extends the shelf life of foods by reducing or eliminating micro-organisms and insects....
(Plastic Shapes and Stock)
From this Article:
We have posted on plastic extensively for wet process tools, back end test, infrastructure such as clean rooms and inside vacuum chambers, however we have yet to discuss in detail plastic materials...
(Plastic Shapes and Stock)
From this Article:
COMMON CONDUCTIVE ENGINEERING THERMOPLASTICS IN TERM OF RESIN TECHNOLOGIES...
(Plastic Shapes and Stock)
From this Article:
WHAT EXACTLY IS HAPPENING TO MAKE SOME MATERIALS MORE HYDROPHILIC?...
(Plastic Shapes and Stock)
From this Article:
Processes, procedures and materials to make CE! designated parts can not be changed without proper notification and qualification....
(Plastic Shapes and Stock)
From this Article:
Traditionally machinable plastics have used a variety of filler such as chopped carbon fiber technology to impart static conductive and dissipative properties to plastics.
Using chopped carbon fibers...
(Plastics, Elastomers and Polymers)
From this Article:
As composites are known for their outstanding mechanical properties, many semicrystalline materials offer higher mechanical properties and ductility as well as excellent chemical resistance. The...
(Plastic Shapes and Stock)
From this Article:
With all the attention placed on managing the electromotive force once its present, commonly known as static electricity, there is a class of materials that actually focus on the prevention of the...
(Plastic Shapes and Stock)
From this Article:
One property that is not always needed in wet process tools is elevated thermal performance. One potential candidate for cost reduction in wet process applications that use PEEK is semiconductor grade...
(Plastic Shapes and Stock)
From this Article:
Following several fires in semiconductor fabrication plants in Asia in the late 1990s, the industry came up with guidelines to reduce the risk of costly fires. FM Global, an international leader in...