-
Supplier: Caterpillar Oil & Gas
Description: Voltmeters Gauge mounting Ammeter Lube System Oil pan Oil pan drain Oil level gauges Oil filter — bypass and remote Lubricating oil Oil filler Fumes disposal Mounting System Front and rear engine supports Structural steel base Power Take-Offs Crankshaft pulleys Crankshaft pulley —
- Horse Power: 385 to 520 HP
- RPM: 2,100 rpm
- Displacement: 12.454158654210135 liters
- Length: 47.3 inch
-
Supplier: Caterpillar Oil & Gas
Description: filter — bypass Oil filter — remote Lubricating oil Oil filler Fumes disposal Mounting System Front and rear engine supports Structural steel base Power Take-Offs Crankshaft pulleys Crankshaft pulley — stack-on Output flange Flywheel stub shaft Front stub shaft Hydraulic pump drive
- Horse Power: 325 to 450 HP
- Displacement: 11.159581636206713 liters
- Length: 47.3 inch
- Width: 41.6 inch
-
Supplier: Caterpillar Oil & Gas
Description: filter — RH Oil pan — front sump Oil filler — top mounted Oil level gauge — LH side Oil pump — gear-driven Oil valve sampling Preservation of turbocharger, flywheel, and crankcase Power Take-Offs Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (7/8 in) wide
- Horse Power: 340 HP
- RPM: 2,200 rpm
- Displacement: 8.815577881077479 liters
- Length: 44.4 inch
-
-
Supplier: Caterpillar Oil & Gas
Description: pan — front sump Oil filler — top mounted Oil level gauge — LH side Oil pump — gear-driven Oil valve sampling Preservation of turbocharger, flywheel, and crankcase Power Take-Offs Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (7/8 in) wide General Vibration
- Horse Power: 275 to 375 HP
- Displacement: 8.81623336311191 liters
- Length: 43 inch
- Width: 32.6 inch
Find Suppliers by Category Top
More Information Top
-
My Little PTO | Today's Trucking
A front-mount/ crankshaft - driven PTO takes power off the front of the engine, which is especially useful where power is required while the vehicle is in motion.
-
Design Parameters of Four-shank Vibrating Subsoiler
The crankshaft was driven by pto shaft via a gear box and chain transmission system.
-
T800 PTO OPTION | Today's Trucking
An optional front engine PTO , crankshaft - driven adapter can be ordered to power the front engine PTO driveshaft.
-
Chapter 4. Powered Tillage Equipment. Part II. Vibratory Tillage Implements
The crankshaft was driven by the PTO shaft via a gear box and chain transmission system.
-
7th AVL International Commercial Powertrain Conference Proceedings (2013)
The power transmission is possible with a 100% Power Take off drive ( PTO ) directly at the front of the crankshaft and additionally with two side PTOs for 85 and 310 Nm.
Indicates content that may require registration and/or purchase.