-
Supplier: ERSAELECTRONICS PTE. LTD.
Description: IC DAC VIDEO ENC NTSC 44TQFP Product overview: ADV7171KSUZ from Analog Devices Inc. is a Digital-to-Analog Converter IC for analog output generation, control loops, instrumentation, signal synthesis, and embedded system interfaces. It is useful for engineers
- Pin Count: 44
- Resolution: 10 bits
- Operating Temperature: -40 C
- Features: Other
-
Supplier: ERSAELECTRONICS PTE. LTD.
Description: Integrated Digital CCIR-601 YCrCb to PAL/NTSC Video Encoder / Video Encoder 4 DAC 10bit 44-Pin PQFP Product overview: ADV7176KS from Analog Devices Inc. is a Digital-to-Analog Converter IC for analog output generation, control loops, instrumentation,
-
Supplier: ERSAELECTRONICS PTE. LTD.
Description: 8-Bit, 20 MSPS ADC Triple Ch., Digital Clamp for YUV/NTSC/PAL, Output Data Format Mux, Low Power 64-LQFP -20 to 75 Product overview: TLC5733AIPM from Texas Instruments is an Analog-to-Digital Converter IC for sensor measurement, data acquisition,
- Resolution: 8 bits
- Features: Other
-
-
Supplier: ERSAELECTRONICS PTE. LTD.
Description: NTSC/PAL/SECAM 4x10-bit digital video decoder with macrovision detection, YPbPR/RBG inputs 80-HTQFP 0 to 70 Product overview: TVP5146PFPR from Texas Instruments is an Interface Transceiver IC for serial communication, bus conversion, signal driving, receiver stages, and
- TJ: 0 C
- Features: Other, RoHS Compliant
- Device Type: Transceiver
-
IC Interfaces - Interface - Interface - Encoders, Decoders, Converters - AK8858VQ -- 199006-AK8858VQSupplier: Win Source Electronics
Description: Manufacturer: AKM Semiconductor Inc. Win Source Part Number: 199006-AK8858VQ Packaging: Tray Type: Video Decoder Applications: NTSC, PAL Mounting: SMD (SMT) Categories: Integrated Circuits Status: Active Case / Package: 80-LQFP (12x12) Analog Supply Voltage: 1.7 V to 2 V Digital
- Features: Other
- Package Type: QFP
-
Supplier: Win Source Electronics
Description: Manufacturer: Intersil Win Source Part Number: 122573-TW9903-MBS Packaging: Tray Type: NTSC/PAL/SECAM Video Decoder Applications: Multimedia Mounting: SMD (SMT) Categories: Integrated Circuits Status: Active Case / Package: 100-LQFP Analog Supply Voltage: 3.15 V to 3.45 V
- Features: Other
- Package Type: QFP
-
Supplier: Win Source Electronics
Description: Manufacturer: Rohm Semiconductor Win Source Part Number: 118002-BH7240AKV-E2 Packaging: Reel - TR Type: Signal Applications: NTSC, PAL Mounting: SMD (SMT) Categories: Integrated Circuits Status: Not For New Designs Case / Package: 48-VQFP (7x7) Analog Supply Voltage: 4.5 V to 5.5 V
- Features: Other
- Package Type: QFP
-
Supplier: Win Source Electronics
Description: Manufacturer: Rohm Semiconductor Win Source Part Number: 011589-BH7236AF-E2 Packaging: Reel - TR Type: Signal Applications: NTSC, PAL Mounting: SMD (SMT) Categories: Integrated Circuits Status: Not For New Designs Case / Package: 24-SOP Analog Supply Voltage: 4.5 V to 5.5 V
- Features: Other
- Package Type: SOP
Find Suppliers by Category Top
Featured Products Top
-
enhanced Σ-Δ architecture with integrated digital filtering. This ADC offers flexible configuration options, allowing engineers to switch between high-resolution and high-speed modes. With 111 dB SNR (in high-resolution mode) and a (read more)
Browse Analog-to-Digital Converter (ADC) Chips Datasheets for Win Source Electronics -
When connected to a specified Analog Devices high speed converter evaluation board, the ADS9-V2EBZ works as a data capture/transmit board. Designed to support the highest speed JESD204B/C data converters, the FPGA on the ADS9-V2EBZ acts as the data receiver for high speed ADC's, and as the (read more)
Browse Digital-to-Analog Converter (DAC) Chips Datasheets for Richardson RFPD -
ADI's MAX77859 is a high-efficiency, high-performance buck-boost converter targeted for systems requiring a wide input voltage range (2.5 V to 22 V). The IC can supply up to 6 A of output current in buck mode and 4 A in boost mode (VIN = 3.7 V (read more)
Browse DC-DC Converter Chips Datasheets for DigiKey -
-drift internal reference and reference buffer, the AD4854 allows the SoftSpan range of each channel to be independently configured to match the application signal swing, thereby minimizing additional external signal conditioning. To further maximize the single-conversion dynamic range, the AD4854 incorporates (read more)
Browse Analog-to-Digital Converter (ADC) Chips Datasheets for DigiKey -
. The IC fully integrates sensing elements, voltage regulators, analog-to-digital converters, and a digital controller to adaptively measure the magnetic signal and provide a robust, low-jitter AK Protocol output over the two-wire interface. The A19351 features Allegro’s Solid (read more)
Browse Speed Sensors Datasheets for Allegro MicroSystems Inc. -
might be read by an analog-to-digital converter (ADC) in a monitoring system for recording instantaneous device current. The device offers FLAG and UVOV communication signals to indicate different operational and fault signals. The communication signal pins are open drain in nature and require (read more)
Browse Power Supplies Datasheets for DigiKey
More Information Top
-
A class-AB high-speed low-power operational amplifier in BiCMOS technology
The applications cover intermedi- ate frequency (IF) signal processing in the 20-100 MHz range, digital-to-analog and analog- to - digital converters in wireless front-ends [11J and National Television Standards Committee ( NTSC )/PAL decoders in video/multimedia electronics IC ’s .
-
A 0.8 μm CMOS digital signal processor for a video camera
… b) 3-line Color ProcessingCircuit (c) Y ProcessingCircuit (d) NTSC /PAL Encoder (2) SSG … … 2ch DAC (Digitalto Analog Converter ) (5) Digital Interfacefor DigitalFeatures (6) Serial Interfacefor MicroComputer Thanks to this large scale integration … … up of so few IC 's as shown in …
-
A design of VSB receiver IC for digital television
A Design of VSB Rccciver IC for Digital Television AID converter Input to the AID converter Carrier recovery scheme DIA converters for STR and AGC NTSC rejection filter .
-
1981 Index IEEE Transactions on Consumer Electronics Vol. CE-27
Thick-film circuits frequency converter , 2 GHz-60 MHz, for TV receivers; Uwamo, Tomoki; T-CE … … quality tuner; Grosjean, Jon P.; T-CE Feb 81 47-50 digital frequency synthesizer with alive … … receiver tuners TV bridges to future high-definition television … … CE Aug 81 311-314 CMOS implementation of chroma bandpass, chroma notch, and sound bandpass filters; Srinivasan, S.; T-CE Aug 81 200-209 color transient response in NTSC system; Naimpally, Saiprasad V … … decoder implemented in bipolar IC ; Yoshihisa, Kozo; T-CE …
-
PCM Audio IC's for 8 mm Video
They perform digital signal processings such as 8- to -10 bit conversion, error correction, and modulation. Mode selection, recording or playback and NTSC or CCIR, is possible by changing external pin connection. The other two ICs , the AD/DA CONVER- TER and the INTERFACE, are bipolar ICs.
-
Design of an MPEG-2 codec
In every video recording or playback system, MPEG ICs need to be connected to a variety of other devices, such as memory, NTSC /PAL video encoders and decoders, audio converters , system controllers, and recording me- dia. As an example, we look into the system design of a USB-based digital video recorder and …
-
Flicker-Free Non Interlaced Receiving System for Standard Color TV Signals
… H delay line, and the LC transversal filter and custom bi-polar linear IC were used for … NTSC RECEIVER Fig. 4-1. shows a block diagram of an NTSC receiver with Y C separation by menas of the logical comb filter, and the interlace/non-inter- lace signal converter section provided by line memories. The composite signals from the tuner is first converted to 8-bit digital signal and then fed into the logical comb filter.
-
An Integrated High Performance Mixed Signal IF-to-Digital Converter
A single 'chip9 IF- to - Digital converter sub-system containing Low Noise Amplifiers, AGC, down-conversion mixers, oscillators, baseband amplifiers, references and an A/D converte is presented Mixed analog-digital circuit design and packaging techniques achieve a high level of integration using Measured results show that the IC can operate on IF signals between 30MHz-85MHz and decode transmissions up to 64QAMeither in NTSC or PAL systems.
-
Zoran Corporation Announces New Reference Design for High Quality, Cost Effective High Definition Televisions
The new ATSC/ NTSC compliant reference design greatly reduces the overall system cost for manufacturers of digital televisions due to the high level of integration within the SupraHD 660 IC , the cost-effective Cascade 2 demodulator, and the partnerships Zoran has with … … video (Y/C), and component (YPbPr) inputs processed by the on-chip 3D comb filter color space converter .
-
Synchronous quantized subcarrier multiplexing for transport of video, voice, and data
The system was configured to mul- tiplex two full-bandwidth NTSC baseband video signals with a single … The analog- to - digital converter used to digitize the composite signal was a commercially produced IC from Motorola having the specified performance features listed in Table I.
Indicates content that may require registration and/or purchase.