-
Supplier: Mactac
Description: M-Dot Floor is a 7.9-mil matte white PVC film with built-in antislip. Designed for Latex, UV and solvent-based inkjet printing. The product is coated on one side with a semi-sphere structured, clear removable, acrylic pressure-sensitive adhesive and supplied with a 74# white Kraft
- Chemical / Polymer System Type: Vinyl (PVC)
-
Supplier: Mactac
Description: MD228 is a 4.7-mil matte white vinyl (PVC) film designed for Latex, UV and solvent-based ink jet printing. The product is coated on one side with a semi-sphere structured, clear removable, acrylic pressure sensitive adhesive and supplied with a coated paper release liner. MD228 is
- Chemical / Polymer System Type: Vinyl (PVC)
-
Supplier: Mactac
Description: MD199 is a 4.7-mil gloss clear, soft-calendared PVC film designed for Latex, UV and solvent-based ink jet printing. The product is coated on one side with a clear removable, semi-sphere structured dot, pressure sensitive adhesive and supplied with a 5 mil coated paper release liner.
- Chemical / Polymer System Type: Vinyl (PVC)
-
-
Supplier: BNB INT. Co., Ltd.
Description: .4mm Applications Bearing, display equipment parts, and ball caster (ball transfer) Polyvinylchloride (PVC): Polyvinylchloride PVC is a nontoxic plastic with high water, acid, and alkali resistance, and electric insulation. Features It
- Applications: Bearing / Power Transmission, Conveyors / Ball Transfers, Medical / Biotech, Valves, Specialty / Other
- Ball Type: Plastic Balls
- Diameter / OD: 0.0394 to 2 inch
- Features: Corrosion Resistant, Dielectric / Electrically Insulating, Nonmagnetic
-
Storage Tanks and Process Tanks - 1050 2 Compartment NuConSept Septic Tank - Preplumbed -- SII-ST52RSupplier: Plastic-Mart
Description: •NuConSept Septic tanks are furnished preplumbed with inlet and outlet tees, gaskets, and manhole covers. •With the exception of the 300 gallon and 500 gallon sphere tanks, SEPTIC TANKS ARE NOT TO BE USED AS PUMP TANKS OR HOLDING TANKS WITH PUMPS IN THEM. •Parabolic
- Height: 62 inch
- Type: General Purpose/ Bulk Storage Tank
- Volume Capacity: 1050 gallons
-
Storage Tanks and Process Tanks - 1500 1 Compartment NuConSept Septic Tank - Preplumbed -- SII-ST71RSupplier: Plastic-Mart
Description: •NuConSept Septic tanks are furnished preplumbed with inlet and outlet tees, gaskets, and manhole covers. •With the exception of the 300 gallon and 500 gallon sphere tanks, SEPTIC TANKS ARE NOT TO BE USED AS PUMP TANKS OR HOLDING TANKS WITH PUMPS IN THEM. •Parabolic
- Height: 62 inch
- Type: General Purpose/ Bulk Storage Tank
- Volume Capacity: 1500 gallons
-
Storage Tanks and Process Tanks - 1250 2 Compartment NuConSept Septic Tank - Preplumbed -- SII-ST62RSupplier: Plastic-Mart
Description: •NuConSept Septic tanks are furnished preplumbed with inlet and outlet tees, gaskets, and manhole covers. •With the exception of the 300 gallon and 500 gallon sphere tanks, SEPTIC TANKS ARE NOT TO BE USED AS PUMP TANKS OR HOLDING TANKS WITH PUMPS IN THEM. •Parabolic
- Height: 62 inch
- Type: General Purpose/ Bulk Storage Tank
- Volume Capacity: 1250 gallons
-
Storage Tanks and Process Tanks - 1250 1 Compartment NuConSept Septic Tank - Preplumbed -- SII-ST61RSupplier: Plastic-Mart
Description: •NuConSept Septic tanks are furnished preplumbed with inlet and outlet tees, gaskets, and manhole covers. •With the exception of the 300 gallon and 500 gallon sphere tanks, SEPTIC TANKS ARE NOT TO BE USED AS PUMP TANKS OR HOLDING TANKS WITH PUMPS IN THEM. •Parabolic
- Height: 62 inch
- Type: General Purpose/ Bulk Storage Tank
- Volume Capacity: 1250 gallons
Find Suppliers by Category Top
More Information Top
-
Statistical modelling of the spouted bed coating process using positron emission particle tracking (PEPT) data
To validate the model, a spouted bed coating process was studied in which coarse PVC spheres were coated with the hot‐melt coating material polyethylene glycol (PEG) 1500.
-
Zero migration of monomers in glassy polymers: A possible artifact of thermal depolymerization
The results of the solution of the model equations for oT,the transient average concentration of VCM in PVC, for three different diameter PVC spheres at three tem- peratures are shown in Figs. 3 to 5.
-
White's Handbook of Chlorination and Alternative Disinfectants 5th Edition Complete Document
The electrode surfaces are kept clean by a rotating striker assembly consisting of PVC spheres around the cell.
-
The hydrodynamics of spherical capsules
Trains of 24 steel ball bearings of sphere/pipe diameter ratio 0.91 were employed in the % in. pipe; in the 2 in. pipe trains of 10 and 25 ball bearings, and of 10 hollow PVC spheres that could be loaded to …
-
Effects of Oversize Particles on the Density of Clean Granular Soils
Uniform glass and polyvinyl chloride ( PVC ) spheres were used in Group 1 tests; plastic bean-shaped particles and gravel were used in Group 2 tests; and sand and gravel were used in Group 3 tests.
-
Non-contact multi-frequency magnetic induction spectroscopy system for industrial-scale bio-impedance measurement
The sec- ond set of solutions were prepared in 57 mm diameter thin PVC spheres .
-
Ultrahigh-resolution optical imaging of colloidal particles
First images of a field of 100 nm diameter fluorescent calibration PVC spheres (Molecular Probes Ltd, Eugene, OR), are shown in figure 4 using an adapted commercial Bio-Rad MRC 600 scanning microscope in three imaging modalities, namely, type I (conventional .
-
Acoustic scattering of underwater targets
The targets considered are a brass sphere, a PVC sphere , a brass cylinder, a PVC cylinder, concrete block and MS cylinder of different dimensions.
-
Electron beam radiation damage to organic inclusions in vitreous, cubic, and hexagonal ice
In Figs. 5 and 6 we note that radiation damage starts at points where two PVC spheres are adjacent.
-
Minimizing the pressure gradients in capsule pipelines
Comparison of the pressure gradients of PVC spheres and butyrate cylinders, k = 0.93, in the stainless steel pipe.