Products/Services for Ballistic Particle Manufacturing
-
Rapid Prototyping Services - (837 companies)Rapid prototyping automates the fabrication of a prototype part from a three-dimensional (3-D) CAD drawing. These physical models convey more complete information about the product earlier in the development cycle.CapabilitiesServicesLocation -
Nanomaterials - (253 companies)Nanomaterials have features or particle sizes in the range of 1 to 100 nm. How to Select Nanomaterials. Silver Nanopowder. Image Credit: SkySpring Carbon nanotubes. Image Credit: RSC. Nanomaterials have features or particle sizes in the range of 1... -
Glass Powders and Precursors - (20 companies)Glass powders and glass precursors typically consist of oxides with a random, liquid-like or non-crystalline molecular structure. Glass powders and glass precursors are used in a wide variety of applications, so they come in a range of particle...
-
Particle Analyzers - (229 companies)Particle analyzers are used to determine the physical makeup of individual particulates in aerosols, dispersion, emulsions, powders, and other samples. Particle analysis is also used to determine particle velocity and surface charging. Particle... -
Armor and Ballistic Shielding - (90 companies)Armor materials and ballistic shielding are made of ceramics, high-strength fiber textiles, specialty alloys, and composite materials that are resistant to explosions, blast debris, shrapnel and high-velocity projectiles. Armor and ballistic... -
Calorimeters and Thermal Analyzers - (117 companies)Calorimeters and thermal analyzers contain a heat source that can deliver a heat flux, at a distinct temperature, into a sample, and a temperature-measuring device that can read the resultant change in temperature.
-
Composites and Composite Materials - (259 companies)Composites and composite materials typically consist of a matrix and a dispersed, fibrous or continuous second phase. The second phase may reinforce the material, alter electrical or magnetic properties, or enhance wear or erosion resistance.
-
Foams and Foam Materials - (577 companies)Foams and foam materials are industrial products made from low density elastomers, plastics and other materials with various structures and porosities.
-
Magnesium and Magnesium Alloys - (90 companies)Magnesium and magnesium alloys are nonferrous metals with low density, good ductility, moderate strength, and good corrosion resistance.
-
Video Cameras - (1650 companies)Video cameras record live-action scenes that are available for viewing via a stored or transmitted video feed. This allows the user to create a permanent and detailed chronicle of events. Video cameras record dozens of pictures (or frames) a second that when viewed in succession, clearly distinguish the translation of an object or person over time.
Product News
-
NDE Professionals Inc.
Magnetic Particle Testing Magnetic Particle testing is one form of engineering evaluation that detects and interprets flaws in materials, while causing no harm to the materials or structure under examination. It is an exacting science, with highly developed testing techniques. Magnetic Particle testing consists of inducing a magnetic field into a ferromagnetic material (such as rolled, cast, or forged steel). The application of magnetic particles and the interpretation of the patterns formed by the particles... (read more) -
Electro Optical Components, Inc.
Scintilators for High Energy Particle Detection A Scintillator Detector is used to measure charged particles and gamma rays. The scintillations produced by these charged particles and gamma rays in a phosphor are detected and amplified by a photomultiplier, giving an electrical output signal. Syntillator Detectors include: High Resolution Gamma Measurement. Handheld Gama Spectrometer. Scintillator Detector Assemblies. CdZnTe Probe. Scintillator Materials include: Ce:GAGG Crystal. Ce:GAGG Ceramics. Ce:YAP Crystal. Ce:YAG Crystal. Ce:LYSO... (read more) -
PCE Instruments / PCE Americas Inc.
Particle Counter PCE-CPC 50 The state-of-the-art particle counter enables precise real-time measurement in the range from 0.3 mm to 10 mm to provide a comprehensive picture of the air quality. The results are presented in two units, either in number per m ^3, number per litre or number per 28.3l. Air sampling is performed by an internal pump. When the particles pass the light source (laser), light scattering occurs; the scattered light is converted into an electrical signal (pulse) by a photoelectric transducer... (read more)Browse Particle Analyzers Datasheets for PCE Instruments / PCE Americas Inc. -
Suzhou Jiujon Optics Co., Ltd
Plano-Concave Mirror for Laser Particle Counters Precision Optical Solution for Laser Particle Counters. This plano-concave mirror is designed to enhance the performance of laser particle counters, providing accurate beam manipulation for improved particle detection and analysis. Its high-quality optical materials ensure minimal distortion and maximum efficiency in demanding applications such as environmental monitoring, air quality control, and industrial contamination systems. Key Features: Precision-manufactured to control laser beam... (read more)Browse Optical Mirrors Datasheets for Suzhou Jiujon Optics Co., Ltd -
O'Keefe Controls Co.
Clean Fluid In, Particles Kept Out of Enclosures O'Keefe Controls Miniature Fine Screen Breathers provide effective particulate control for enclosed components. Rated at 15, 25 or 100 microns, they allow clean fluid in, while preventing the ingestion of solid particles which could cause problems. Common applications include use in equipment enclosures, vented control components, small three- or four-way valves, small two-way vacuum valves, air purge equipment, and EMI or RFI shields. These convenient devices are available in brass... (read more)Browse Flow Orifices and Flow Restrictors Datasheets for O'Keefe Controls Co. -
Eastern Instruments
Solid Particle Mass Flow Meter: Low Flows The CentriFlow® Low Flow Meter is a specially designed solid-particle mass flow meter that can accurately measure bulk solids from pellets and granular materials to powders at extremely low flow rates. What is the CentriFlow Low Flow Meter?. The CentriFlow® Low Flow Meter is a specially designed solid-particle mass flow meter that can accurately measure bulk solids from pellets and granular materials to powders at extremely low flow rates. Used for measuring the continuous flow of a variety... (read more)Browse Solids Flow Meters Datasheets for Eastern Instruments -
Agilent Technologies - Vacuum Products
How Vacuum Enables Particles and Plasma Research Agilent Vacuum has been supporting scientific inquiry enabled by ultrahigh & extreme high vacuum for many decades. As the successor to Varian, which invented the ion getter pump that made UHV possible, Agilent remains committed to supporting physics exploration that expands knowledge of the physical world through continued innovation of vacuum technologies, products, and services. Read more here. (read more)Browse High Vacuum Pumps Datasheets for Agilent Technologies - Vacuum Products -
Eastern Instruments
Solid-Particle Flow Measurement - Vertical Flow The CentriFlow® Type II Meter, manufactured by Eastern Instruments, is a solid-particle mass flow meter used for measuring bulk solids continuously in a process. The Type II Meter works well for feed systems that allow product to move in a vertical direction, such as screw conveyors, rotary valves and slide gates. The enclosure is great for containing dusty products and for minimizing contamination to the product while in process. How It Works. The Type II Meter is configured to fit inside... (read more) -
AGC Chemicals Americas, Inc.
Fine Silica Particles Enhance 3D Printing Resins SOLESPHERE Fine Silica Particles Enhance 3D Printing Resins Used in Different Processes. 3D printing has completely transformed our world with its countless applications. It 's not just about rapid prototypes anymore. Now, we 're using it for everything from crafting prosthetics and medical gadgets to creating stylish clothes and educational tools. 3D printing resins are a key component. They provide the desirable characteristics that regular fillers just can 't match. They 're what enable us... (read more)Browse Silica, Quartz, and Silicate Materials Datasheets for AGC Chemicals Americas, Inc. -
Ducon Environmental Systems
Wet Scrubbers - Remove Particles & Acid Gases particulate. This unit operates with centrifugal action between gas stream and liquid and can be designed with either spin vanes or spray manifolds for liquid distribution. High efficiencies are obtained for particles in the 1 to 8-micron range. Custom Engineering for an Industrial Wet Scrubber or a wet scrubber system is possible. Send us your requirements for feedback. Wet Scrubber Applications: Pulp and Paper; Kraft Process. Black Liquor Recovery Boilers. Dissolving Tanks. Mining Plants: Particulate... (read more)Browse Baghouses and Baghouse Filters Datasheets for Ducon Environmental Systems
-
Principles of Laser Materials Processing Complete Document
… 2.1.1 Beam Scanning 19.2.1.2 Parallel Processing 19.2.2 Powder-Based Systems 19.2.2.1 Selective Laser Sintering (SLS) 19.2.2.2 3D Printing 19.2.2.3 Ballistic Particle Manufacturing 19.2.3 Solid …
-
Springer Handbook of Mechanical Engineering
ballistic particle manufacturing BPR .
-
Moon
For example, ballistic particle manufac- turing may be appropriate for creating the foundation layer.
-
Virtual Prototyping & Bio Manufacturing in Medical Applications
Reports in literature can be found on the usage of stereolithography (SLA), three-dimensional printing (3DP), ballistic particle manufacturing (BPM) and others.
-
Additive Manufacturing Technologies
Another example may be the defunct Ballistic Particle Manufacturing process, which used a 5-axis mechanism to direct wax droplets onto a substrate.
-
Micro-Manufacturing: Design and Manufacturing of Micro-Products
3D Printing multi jet manufacturing ballistic particle manufacturing rapid freeze process .
-
Additive Manufacturing Technologies
Another example may be the defunct Ballistic Particle Manufacturing process, which used a 5-axis mechanism to direct wax droplets onto a substrate.
-
Laser Fabrication and Machining of Materials
9.3.1.6 Ballistic Particle Manufacture (BPM .
-
Rapid prototyping of large scale aerospace structures
Ballistic Particle Manufacturing (BPM) is a new process that fires droplets of thermoplastic material froma five axis head onto a surface to .
-
Three-dimensional rapid prototyping technologies and key development areas
0 fused deposition modelling (FDM) 0 three-dimensional printing 0 ballistic particle manufacturing .
Indicates content that may require registration and/or purchase.