-
Supplier: Scientific Polymer Products, Inc.
Description: Polyethylene, oxidized Catalog # : 406 CAS : 68441-17-8 Physical Form : Powder Density (g/cc) : 0.99 Brookfield viscosity : 9,000cp (149C) Fp (F) : >490 Softening Point (C) : 138 TSCA : TSCA listed Misc : Acid number 28mg KOH/g Soluble in : Insoluble in water
- Chemical System: Polyethylene
- Features: Thermoplastic
-
Supplier: Scientific Polymer Products, Inc.
Description: Polyethylene Catalog # : 558 CAS : 9002-88-4 Physical Form : Powder Approx Mn : 1,800 Density (g/cc) : 0.94 Refractive Index : 1.51 Viscosity : 450cp (140C) Fp (F) : >445 Softening Point (C) : 117 TSCA : TSCA listed Soluble in : (Above 80C) Xylene
- Index of Refraction: 1.51
- Viscosity: 450 cP
- Chemical System: Polyethylene
- Features: Thermoplastic
-
Supplier: Scientific Polymer Products, Inc.
Description: Poly(ethylene oxide) Catalog # : 136B CAS : 25322-68-3 Physical Form : Powder ParticleSize : 98% thru 10 mesh Approx Mw : 200,000 Density (g/cc) : 1.21 Refractive Index : 1.4539 Viscosity : 75cp (5% solution @ 25C) Tm (C) : 65 TSCA : TSCA listed Tg (C) : -67 Soluble in : Acetonitrile,
- Index of Refraction: 1.4539
- Viscosity: 75 cP
- Chemical System: Polyethylene
- Features: Thermoplastic
-
-
Supplier: Scientific Polymer Products, Inc.
Description: Poly(vinyl alcohol), 98% hydrolyzed Catalog # : 362 CAS : 9002-89-5 Physical Form : Powder Approx Mw : 88,000 Density (g/cc) : 1.29 Refractive Index : 1.50 Viscosity : 30cp (4% aqueous solution @ 20C) Tm (C) : 200 TSCA : TSCA listed Misc : pH 6-8 Soluble in : Glycerol (hot), glycols (hot),
- Index of Refraction: 1.5
- Viscosity: 30 cP
- Chemical System: PolyVinyl Chloride (PVC)
- Features: Thermoplastic
-
Supplier: Dynasol Elastomers
Description: Calprene® 6144 is a thermoplastic copolymer Ethylene-Butylene/Styrene (69/31), polymerized in solution and having a linear structure. Benefits Excellent UV, ozone and temperature resistance Easy oil absorption High compatibility with polyolefins Excellent mechanical properties FDA Approved
- Features: Elastomer / Rubber, Styrene Copolymer (SBR, etc.), Thermoplastic / TPE
Find Suppliers by Category Top
Featured Products Top
-
Offers much greater pressure capability than unreinforced polyurethane tubing Made from non-toxic raw ingredients conforming to FDA standards Resin is listed by the National Sanitation Foundation (NSF-61) for use with potable water Resistant to weathering†, tearing (read more)
Browse Industrial Hose Datasheets for NewAge Performance Products | NAPP -
. Filled PTFE Compounds: Compounded with pigments and fillers like glass, graphite and metal powders for enhanced wear, creep resistance and thermal/electrical performance. Adhesive Grades: Fluorinated adhesive resin compounds made with Fluon (read more)
Browse Resins and Compounds Datasheets for AGC Chemicals Americas, Inc. -
. PFA- and PEEK-based fluoropolymer compounds are a better choice for the polymer layer. They adhere strongly to copper, PI, thermosetting resins, thermoplastic resins and glass. They also (read more)
Browse Datasheets for AGC Chemicals Americas, Inc. -
. PFA- and PEEK-based fluoropolymer compounds are a better choice for the polymer layer. They adhere strongly to copper, PI, thermosetting resins, thermoplastic resins and glass. They also (read more)
Browse Datasheets for AGC Chemicals Americas, Inc.