Help with Voltage-to-Frequency Converters specifications:
Device Specifications
Back to Top
Analog Input Channels: | This is the maximum number of analog channel inputs. The single-ended number is specified when single-ended inputs are available as twice the number of differential inputs. Differential channels use the difference between two signals as an input; common mode is filtered out. In some systems, differential inputs are combinations of two single-ended inputs. When this is the case, twice the number of differential channels are available as single-ended inputs. | ||
Search Logic: | All matching products will have a value greater than or equal to the specified value. | ||
Differential Channels | Differential channels have two inputs. The signal to process is the voltage (V) difference between the two inputs. For example, if one reading is 4.93 V and the other reading is 5.16 V, the meaningful value is the 0.23 V difference between the two. Often, this applies to precision measurements where the difference between two low-voltage inputs is small but critical. | ||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
Maximum Output | This is the limit of output voltage. | ||
Search Logic: | All matching products will have a value greater than or equal to the specified value. | ||
Bandwidth | Bandwidth is the difference between the high and low limits of the frequency response, typically defined by a variation from a nominal value by a stated value such as 3 dB. | ||
Search Logic: | All matching products will have a value greater than or equal to the specified value. | ||
Accuracy | Accuracy depends on the signal conditioning linearity, hysteresis, temperature considerations, etc. It is represented here as percent full scale of measurement range. | ||
Search Logic: | All matching products will have a value less than or equal to the specified value. | ||
Signal Isolator | Signal isolation is the separation of any direct electrical contact of a signal. This can be done in various ways, including optical isolation, capacitors, and magnetic induction. | ||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
Signal Inputs
Back to Top
DC Voltage Input | |||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
AC Voltage Input? | |||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
Outputs
Back to Top
Voltage Output? | Variable voltage outputs such as 0-10V, ±5V, etc. | ||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
Current Output? | Variable current level outputs such as 0-20mA, 4-20 mA current loop, etc. | ||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
Frequency Output? | The output is a frequency or pulse signal such as amplitude modulation (AM), frequency modulation (FM), or pulse width modulation (PWM) or control. | ||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
Timer / Counter Output? | The output is a counting or timing of measured events. | ||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
Relay Output? | With switch-type outputs, the contacts are open or closed depending on the state of one or more of the inputs. | ||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
Other Output? | Other unlisted or specialized outputs. | ||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
Filter Specifications
Back to Top
Low Pass Cutoff Frequency | The low pass cutoff frequency is the nominal frequency below which the input signal is passed and above which the signal is blocked. | ||
Search Logic: | User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria. | ||
Integral Filter? | Integral filters allow certain signal frequencies to pass while attenuating others. These filters can also operate on signal phase. | ||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
Programmable Filter? | Filter parameters such as cutoff frequencies may be interactively programmed by the user. | ||
Search Logic: | "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice. | ||
Form Factor
Back to Top
Form Factor | |||
Your choices are... | |||
Printed Circuit Board (PCB) | Devices are printed circuit boards (PCBs) that attach to enclosures or plug directly into computer backplanes. | ||
Panel / Chassis Mount | Devices attach to a panel or bolt onto a chassis. | ||
Modular Bay / Slot System | Devices stack in modular bays or slots, and can be interfaced to other units. | ||
Rack Mount | Devices are rack-mounted and fit inside enclosures such as a standard 19 in. telecommunications rack. | ||
DIN Rail | Devices mount on a standard DIN rail. DIN is an acronym for Deutsches Institut für Normung (DIN), a German national organization for standardization. | ||
Stand Alone | Devices are benchtop or floor-standing units with a full casing or cabinet, and an integral interface. | ||
Other | Other unlisted form factors. | ||
Search Logic: | All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches. | ||
User Interface
Back to Top
User Interface | |||
Your choices are... | |||
None | There is no user input or programmability. Instead, there is "black box" style of storage for download or processing elsewhere. | ||
Front Panel and Display | There are integral controls, a keypad, and/or a display on the panel of the unit. | ||
Touch Screen | The device's visual display screen is contact-sensitive to allow direct input. | ||
Hand-held / Remote Programmer | The interface unit is designed specifically to be held in the hand while the user enters program parameters, and may include remote programming. | ||
Computer Programmable | The device is interfaced to a separate supervisory or host computer. | ||
Other | Other unlisted user interface methods. | ||
Search Logic: | All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches. | ||