Technical Articles
Beijing Grish Hitech Co., Ltd. has published these technical articles:
(Abrasives and Abrasive Products)
From this Article:
For cast iron, silicon carbide is almost always the right starting point - green or black SiC in a friable vitrified bond, run dry or with a light mist, in the 36-80 grit range for stock removal and...
(Abrasives and Abrasive Products)
From this Article:
This guide covers what diamond polishing compounds are, how they work, and how to choose and apply them for reliable, high-quality results....
(Abrasives and Abrasive Products)
From this Article:
Selecting the right CMP slurry requires matching both the abrasive chemistry and particle type to the specific wafer material being planarized - the wrong combination directly degrades removal rate,...
(Abrasives and Abrasive Products)
From this Article:
Synthetic diamonds are different from natural diamonds, which are expensive and used mainly in jewelry as gemstones. Due to their large production volume and low cost, synthetic diamonds are mostly...
(Abrasives and Abrasive Products)
From this Article:
For hard substrates like silicon carbide (SiC), gallium nitride (GaN), and sapphire, diamond slurry is the clear choice - its unmatched hardness delivers the removal rates these materials demand....
(Industrial Adhesives)
From this Article:
How to make an LCD sunlight readable...
(Abrasives and Abrasive Products)
From this Article:
For single-fiber fiber optic connectors, PC, UPC, and APC describe the ferrule end-face geometry and polishing finish, not separate connector families. A typical polishing process usually follows a...
(Abrasives and Abrasive Products)
From this Article:
Indium phosphide (InP) is an important III-V compound semiconductor material, InP has a direct leap energy band structure, wide bandwidth, InP crystal materials have high electric field drift speed,...
(Abrasives and Abrasive Products)
From this Article:
Optical lens polishing transforms rough-ground optics into precision components with diffraction-limited performance. This critical final step eliminates subsurface damage, achieves sub-angstrom...
(Abrasives and Abrasive Products)
From this Article:
Silicon carbide lapping film delivers sharp, aggressive cutting action for precision surface finishing on hard and brittle materials....
(Abrasives and Abrasive Products)
From this Article:
This guide covers everything you need to know to implement microfinishing film effectively....