Technical Articles
Conax Technologies has published these technical articles:
(Temperature Sensing)
From this Article:
Conax Technologies has developed ground-breaking technology that lowers the cost of ASM Epsilon® reactor ownership. After eight years of development and testing, Conax introduces its exclusive new...
(Temperature Sensing)
From this Article:
From choosing the right temperature sensor for your particular process application to the periodic recalibration of that temperature sensor, these tips can help you ensure temperature measurement...
(Temperature Sensing)
From this Article:
RTD Tolerance table...
(Sensing and Measurement Instruments)
From this Article:
Specify sensor lead configuration...
(Temperature Sensing)
From this Article:
It is the purpose of the information on this page to give you some general guidelines in estimating the speed of response you might expect from a thermocouple or an RTD. In defining any transient...
(Temperature Sensing)
From this Article:
Thermocouple Characteristics Table...
(Temperature Sensing)
From this Article:
Special tolerances below 0°C (32°F) are unofficial and are provided as a basis of discussion between Conax and our customers....
(Temperature Sensing)
From this Article:
Resistance in Ohms per Double Foot at 68°F....
(Temperature Sensing)
From this Article:
When purchasing a thermocouple as a component of temperature control in an industrial process, one must determine if they will use a standard wire curve to interpret the sensor output or if the...
(Temperature Sensing)
From this Article:
Standard exhaust gas sensors in 7F and 9F class turbines are at risk of premature failure. As temperatures rise, the radiation shield and sensor sheath expand at different rates. A gap forms between...
(Temperature Sensing)
From this Article:
Although temperature sensor buyers usually pay close attention to choosing the right device for the job, they are often less deligent when it comes to installation details. The very best sensor can...
(Seals)
From this Article:
Conax Technologies seal fittings should be installed by suitably qualified personnel in accordance with relevant safety rules and with proper regard to safe working practices....
(Test Equipment Maintenance and Repair)
From this Article:
Requirements of the European Pressure Equipment Directive (PED) 97/23/EC are applicable to Conax Technologies Pressure and Vacuum Sealing Glands....
(Temperature Sensing)
From this Article:
This manual provides instructions on setup and use of Conax PC Programmable Transmitters, Models PTH-400 and PDT-400....
(Temperature Sensing)
From this Article:
This manual provides basic ordering information and specifications for Universal Input Temperature Transmitter, Model HPT, Conax P/N 318548-xxx....
(Hose, Pipe and Tubing)
From this Article:
Supplied pipe thread dimensions are reference only. Typical thread engagement is shown in parentheses.
(Seals)
From this Article:
Standard Sealants...
(Temperature Sensing)
From this Article:
This manual provides basic ordering information and specifications for Universal Input Temperature Transmitter, Model HPTI, Conax P/N 318549-xxx....