120 Single Phase Surge Suppressors
from Surge Suppression Incorporated
Tower Light Protection Products [See More]
- Voltage: 120; 500 & 1000Vdc
- Technology: Hybrid
- Mounting: In-line or Integrally Attached
- Standards: ISO 9001:2008
from Pentair, Inc.
. 17.5 MM W X 68 MM D X 90 MM H SIZE. SUB DISTRIBUTION PANEL USED ON. 0 TO 60 HZ FREQUENCY RATING. 2 AWG SOLID/4 AWG STRANDED WIRE CONNECTION TYPE. CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 120 VAC VOLTAGE RATING. 35 MM DIN RAIL MOUNTING. NEMA 1, IP20 ENCLOSURE. -40 TO 80 DEG C OPERATING... [See More]
- Voltage: 120
- Surge Current: 100000
- Mounting: DIN Rail
- Operating Temp: -40 to 176
from Time Mark Corporation
Transient/Surge Absorbers (TSAs) provide system designers with a cost effective method of protecting sensitive electrical and electronic equipment from damage caused by switching transients, coil and motor backlash, and near miss lightning strikes. There are 3 models available: single-phase (1P),... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Plug-in
- Maximum AC Power: 25000
from MCG SURGE PROTECTION
Max. Continuous Operating VAC: 130% Rated Line Voltage. Response Time: <5 Nanoseconds. Modes of Protection: L-N, L-G, N-G. Surge Current (8x20us): 1 Event - 10kA, 100 Events - 2kA, 1000 Events - 1kA, 10,000 Events - 500A. Status Indicators: Green LED. Operating Altitude: 13,000 ft. (4000m). Temp. [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount; In-line or Integrally Attached
- Surge Current: 10000
from ProTek Devices
Low Profile 120V AC Power Line Surge Suppressor FEATURES. • IEC 61000-4-5 (Surge): 1kA, 8/20 µs - Level 4(Line-Line) & 333A Level 4(Line-Ground). • Meets ANSI/IEEE C62.41 Outdoor Requirements. • Listed to CSA, File LR65240. • Differential and Common Mode Protection. [See More]
- Voltage: 120
- Surge Current: 3000
from CITEL SURGE PROTECTION
The DS70US is a universal SPD for the most demanding AC Power applications. The DS70US Series protects any single or three phase voltage up to 690Vac from the effects of lightning and switching transients. These SPD are approved to the new UL1449 4th Edition (effective March. 2016) and have... [See More]
- Voltage: 120; 240; 480; 600; 120/240; 120/208; 277/480; 347/600; 240-415 V, 400-690 V
- Operating Temp: -40 to 185
- Mounting: DIN Rail
- Standards: IEC; UL
from ASCO Power Technologies
Industrial computers, PLCs, and sensitive instrumentation are at the heart of today's automation systems. Maintaining reliability and uptime are essential to the processes running on the factory floor. Semiconductor technology has advanced over the last several decades increasing equipment's... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: DIN Rail
- Surge Current: 50000
from Transtector Systems, Inc.
The SP Series of AC panel surge protectors provides a full range of nominal operating voltages from 120 Vac to 600 Vac to support global AC surge protection requirements and voltages. The UL 1449 4th Edition design, uses thermally protected MOV technology to ensure robust, reliable, protection for... [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120-600, 120-480 Vac
- Technology: Metal Oxide Varistor
- Mounting: DIN Rail
- Surge Current: 50000 to 100000
from Pentair, Inc.
. 17.5 MM W X 68 MM D X 90 MM H SIZE. SUB DISTRIBUTION PANEL USED ON. 0 TO 60 HZ FREQUENCY RATING. 2 AWG SOLID/4 AWG STRANDED WIRE CONNECTION TYPE. CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 120 VAC VOLTAGE RATING. 35 MM DIN RAIL MOUNTING. NEMA 1, IP20 ENCLOSURE. -40 TO 80 DEG C OPERATING... [See More]
- Voltage: 120
- Surge Current: 10000
- Mounting: DIN Rail
- Operating Temp: -40 to 176
from MCG SURGE PROTECTION
Features: 120LS: I peak=120,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition. NEMA LS1-1992. Three times redundant protection paths per phase. Employs new 40kA varistors with built in high-speed thermal disconnect. Solid copper bus bar construction. Field-replaceable modules. EMI/RFI noise... [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; Device Mount
- Surge Current: 120000
from CITEL SURGE PROTECTION
Characteristics,. - Surge Capacity to 50kA 8/20us per mode, 100kA 8/20us Total. - UL1449 Nominal Discharge Current (In) 20kA (All models). - UL1449 Short-circuit Current Rating (SCCR) 200kA (All models). - UL96A Master Label Compliant. - Hybrid TOV circuit provides immunity during high line... [See More]
- Voltage: 120; 240; 140, 280, 230, 280, 320, 350, 400, 550, 560, 690 V
- Operating Temp: -40 to 185
- Mounting: In-line or Integrally Attached
- Standards: CE Marking; UL
from ASCO Power Technologies
The SPDee Series utilizes large Block 50kA Thermal Protected MOV ’s with surge current levels of 50kA per mode. The unit is a perfect replacement to the obsolete surge arrestors. With a small, compact design and line or load side installation flexibility, this unit can be installed anywhere in... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel (optional feature); DIN Rail (optional feature); Pipe Nipple
- Surge Current: 50000
from Transtector Systems, Inc.
AC surge protector (also known as SPD or lightning protector) 1101-608 from Transtector is a UL 94-V0 plug-in style SPD that utilizes state of the art SASD technology to protect critical equipment that operates on a 120 Vac Single-Phase electrical service. This surge pro-tector provides effective... [See More]
- Voltage: 120
- Technology: Silicon Avalanche Diode
- Mounting: Wall/Panel
- Surge Current: 8000
from Pentair, Inc.
. 17.5 MM W X 68 MM D X 90 MM H SIZE. SUB DISTRIBUTION PANEL USED ON. 0 TO 60 HZ FREQUENCY RATING. 14 AWG WIRE CONNECTION TYPE. CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 120 VAC VOLTAGE RATING. 35 MM DIN RAIL MOUNTING. NEMA 1, IP20 ENCLOSURE. -40 TO 80 DEG C OPERATING TEMPERATURE. 1 PHASE... [See More]
- Voltage: 120
- Surge Current: 40000
- Mounting: DIN Rail
- Operating Temp: -40 to 176
from MCG SURGE PROTECTION
Features: 120,000 amps per phase. UL1449 3rd Edition. Field-replaceable, high capability protection modules with lifetime replacement warranty. High performance, low inductance MicroZ ™ -installed cable. (Click here). Event counter and front panel LEDs for status indication. LED internal... [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; Device Mount
- Surge Current: 120000
from CITEL SURGE PROTECTION
CITEL model DS250VG is a heavy duty AC Surge Protection Device (SPD) for high risk, low tolerance electrical service entrance applications. The DS250VG provides protection against the direct and indirect effects of lightning and is particularly useful in a high lightning area where the risk of heavy... [See More]
- Voltage: 120; 220; 277; 120-127 V, 220-277 V
- Technology: VG Technology for Maximum Performance
- Mounting: Symmetrical Rail 35 mm
- Operating Temp: -40 to 185
from ASCO Power Technologies
Advanced Protection Technologies (APT) has been a worldwide leader in the surge suppression industry since 1985. APT ’s surge protection products have long set the standard for protection of commercial & industrial facilities. surgeassure ™ was formed to bring this same level of... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor; Silicon Avalanche Diode; Hybrid; Inductor
- Mounting: Wall/Panel
- Surge Current: 10000
from Transtector Systems, Inc.
AC surge protector (also known as SPD or lightning protector) 1101-578 from Transtector is a UL 94-V0 plug-in style SPD that utilizes state of the art SASD technology to protect critical equipment that operates on a 120 Vac Single-Phase electrical service. This surge pro-tector provides effective... [See More]
- Voltage: 120
- Technology: Silicon Avalanche Diode
- Mounting: Wall/Panel; DIN Rail
- Surge Current: 8000
from Pentair, Inc.
. 17.5 MM W X 68 MM D X 90 MM H SIZE. SUB DISTRIBUTION PANEL USED ON. 0 TO 60 HZ FREQUENCY RATING. 14 AWG WIRE CONNECTION TYPE. CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 120 VAC VOLTAGE RATING. 35 MM DIN RAIL MOUNTING. NEMA 1, IP20 ENCLOSURE. -40 TO 80 DEG C OPERATING TEMPERATURE. 1 PHASE... [See More]
- Voltage: 120
- Surge Current: 60000
- Mounting: DIN Rail
- Operating Temp: -40 to 176
from MCG SURGE PROTECTION
Features: 120,000 amps per phase. UL1449 3rd Edition. Field-replaceable, high capability protection modules with lifetime replacement warranty. 8 Ft. installed cable. Front panel LED's for status indication. LED internal diagnostics for on-site maintenance. Audible fault alarm with mute switch. All... [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; Device Mount
- Surge Current: 120000
from CITEL SURGE PROTECTION
CITEL model DS150E is a heavy duty AC Surge Protection Device (SPD) for high exposure applications such as direct lightning strikes, capacitor bank switching and large inductive loads. The DS150E is a single pole device that incorporated a multi-varistor circuit. It offers unmatched mechanical... [See More]
- Voltage: 120; 220; 277; 480; 347V-480V, 347V-480V, 347V-480V
- Technology: Metal Oxide Varistor
- Mounting: Symmetrical Rail 35 mm
- Operating Temp: -40 to 185
from ASCO Power Technologies
Our H Series has one, replaceable module per phase and surge current levels of 120kA and 160kA per phase. Our lowest cost replaceable module product for “budget conscience ” projects. FEATURES: UL 1449 Third Edition Listed. 120kA & 160kA per phase ratings. Type 2 SPD – All UL... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel
- Surge Current: 120000 to 160000
from Transtector Systems, Inc.
AC surge protector (also known as SPD or lightning protector) 1101-515-1100 from Transtector is a DIN-Rail style SPD that utilizes state of the art SASD technology to protect critical equipment that operates on a 120 Vac Single-Phase electrical service. This surge protector provides effective... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor; Silicon Avalanche Diode
- Mounting: DIN Rail
- Surge Current: 10000
from Pentair, Inc.
. COMPACT TYPE. 3.9 INCH W X 3.43 INCH D X 2.44 INCH H SIZE. SERVICE ENTRANCE, DISTRIBUTION PANEL USED ON. 0 TO 60 HZ FREQUENCY RATING. 12 AWG WIRING LEAD CONNECTION TYPE. UL (CANADA AND US), UL 1449, CE APPROVAL. INDOOR/OUTDOOR, PHOTOVOLTAIC SYSTEM APPLICATION. 120 V VOLTAGE RATING. 3/4 INCH... [See More]
- Voltage: 120
- Operating Temp: -40 to 176
- Surge Current: 40000
- Wires: 2-Wire
from MCG SURGE PROTECTION
Features: 200,000 amps per phase. UL1449 3rd Edition. Independent lab tested modules. NEMA LS 1 Tested. Redundant modular protection withstands multiple lightning strikes. Solid copper bus bar construction for minimal impedance and enhanced current sharing. High performance, low inductance. Micro-Z... [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; Device Mount
- Surge Current: 200000
from CITEL SURGE PROTECTION
CITEL model DS40 is a standard duty AC Surge Protector (SPD) used in distribution or control panel applications. The DS40 is a single pole module that can be combined with other DS40 modules or a DS40G (N-G Mode Only) module. It is configurable for all 1, 2, and 3 phase application up to 480V AC. [See More]
- Voltage: 120; 480; 277-347 V, 220-240 V, 120-127 V, 277-347 V
- Operating Temp: -40 to 185
- Mounting: Symmetrical Rail 35 mm
- Standards: UL 1449 Third Edition; CE Marking; CSA Mark; IEC; UL; EN 61643-11: Europe; NF EN 61643-11: France
from ASCO Power Technologies
Our H Series has one, replaceable module per phase and surge current levels of 80kA, 120kA and 160kA per phase. Our lowest cost replaceable module product for “budget conscience ” projects. FEATURES: UL 1449 Third Edition Listed. 80 kA, 120kA & 160kA per phase ratings. Type 2 SPD... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel
- Surge Current: 80000 to 160000
from Transtector Systems, Inc.
AC surge protector (also known as SPD or lightning protector) I2R-T240-2PG120 from Transtector is a DIN-Rail style SPD that utilizes state of the art MOV/GDT technology to protect critical equipment that operates on a 120 Vac Single-Phase + CM electrical service. This surge protector provides... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: DIN Rail
- Surge Current: 40000
from Pentair, Inc.
. COMPACT TYPE. 35 MM W X 68 MM D X 90 MM H SIZE. DISTRIBUTION PANEL BOARD, MOTOR CONTROL CENTER, SUB DISTRIBUTION PANEL USED ON. 0 TO 100 HZ FREQUENCY RATING. 14 AWG WIRE CONNECTION TYPE. UL 1449, CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 120 TO 150 VAC VOLTAGE RATING. 35 MM DIN RAIL... [See More]
- Voltage: 120
- Surge Current: 100000
- Mounting: DIN Rail
- Operating Temp: -40 to 176
from MCG SURGE PROTECTION
Features: 200,000 amps per phase, 8x20 us. Date & time of last event it handled/diverted displayed. Independent lab tested modules. UL1449 3rd Edition. NEMA LS 1. Redundant modular protection withstands multiple lightning strikes. Solid copper bus bar construction for minimal impedance and... [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; Device Mount
- Surge Current: 200000
from CITEL SURGE PROTECTION
CITEL model DS70RS is a standard duty AC Surge Protector (SPD) used in distribution or control panel applications. The DS70RS is a single pole module. It is configurable for all 1, 2, and 3 phase application up to 70kA. UL1449 3rd Edition. (UL1449 4th Edition - Type 1CA for -400, -600 *Other... [See More]
- Voltage: 120; 220; 240; 277; 277-347 V, 220-240 V, 120-127 V
- Technology: Metal Oxide Varistor
- Mounting: Symmetrical Rail 35 mm
- Operating Temp: -40 to 185
from ASCO Power Technologies
With one, replaceable module per phase and surge current levels of 160kA and 240kA per phase, the XGA Series is a great fit for Service Entrance and Downstream applications. The XGA Features APT ’s Patented TranSafe ™ Circuitry. FEATURES: UL 1449 Third Edition Listed. 160kA & 240kA... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel
- Surge Current: 80000 to 120000
from Transtector Systems, Inc.
Transtector AC surge protector / arrester (Also known as alternating current surge protection device or SPD as well as transient voltage surge suppressor or TVSS) I2R-T240-1P120 is in-stock and will ship same business day as purchased from us. Our AC surge protector / SPD provides overvoltage... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: DIN Rail
- Surge Current: 40000
from Pentair, Inc.
. COMPACT TYPE. 3.31 INCH W X 3.07 INCH D X 6.02 INCH H SIZE. SERVICE ENTRANCE, MAIN DISTRIBUTION PANEL, INDOOR/OUTDOOR SERVICE PANEL USED ON. 50/60 HZ FREQUENCY RATING. 30 INCH 10 AWG FLYING LEAD WIRE (LINE), 36 INCH 10 AWG FLYING LEAD WIRE (NEUTRAL/GROUND) CONNECTION TYPE. UL 1449, CE APPROVAL. [See More]
- Voltage: 120
- Operating Temp: -40 to 176
- Surge Current: 100000
- Wires: 2-Wire
from MCG SURGE PROTECTION
Features: 400,000 Amps per phase 8x20 us. Date & time of last event it handled/diverted displayed. Independent lab tested modules. UL1449 3rd Edition. NEMA LS 1 Tested. High capability redundant modular protection withstands multiple lightning strikes. Solid copper bus bar construction for... [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; Device Mount
- Surge Current: 400000
from CITEL SURGE PROTECTION
CITEL model DS240 surge protectors are used mainly for distribution panels of single-phase and three-phase networks. They provide common-mode protection (between the active conductors and ground) and are available with an option remote alarm. The DS240 is built with a plug-in module and a fixed... [See More]
- Voltage: 120; 208; 220; 240; 277
- Operating Temp: -40 to 185
- Mounting: Symmetrical Rail 35 mm
- Standards: UL 1449 Third Edition; CE Marking; CSA Mark; IEC; UL; EN 61643-11: Europe; NF EN 61643-11: France
from ASCO Power Technologies
With surge current levels of 100kA, 150kA, 200kA, 250kA, 300kA, 400kA and 500kA per phase, our XAS Series is the SPD that covers most current SPD needs. With one replaceable module per unit containing Large Block 50kA Thermal Protected MOV ’s, this units low cost, reliability, flexibility and... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel
- Surge Current: 100000
from Transtector Systems, Inc.
AC surge protector (also known as SPD or lightning protector) 1101-1153 from Transtector is a DIN-Rail assy style SPD that utilizes state of the art SASD/MOV technology to protect critical equipment that operates on a 120 Vac Single-Phase electrical service. This surge pro-tector provides effective... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor; Silicon Avalanche Diode
- Mounting: Wall/Panel; DIN Rail
- Surge Current: 30000
from Pentair, Inc.
. COMPACT TYPE. 84 MM W X 72 MM D X 155 MM H SIZE. SUB DISTRIBUTION PANEL USED ON. 50/60 HZ FREQUENCY RATING. 24 INCH 10 AWG FLYING LEAD WIRE (LINE), 36 INCH 10 AWG FLYING LEAD WIRE (NEUTRAL/GROUND) CONNECTION TYPE. UL 1449, CE, C-TICK APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 120 VAC... [See More]
- Voltage: 120
- Operating Temp: -40 to 176
- Surge Current: 50000
- Wires: 2-Wire
from MCG SURGE PROTECTION
Features: I peak=120,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition Listed. Triple redundant - three fused surge paths/phase. Remote 1 Form C relay contacts with status LED. Neutral to Ground voltage monitor. Front panel protection status LEDs. Low profile design. All modes protected. [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount
- Surge Current: 120000
from ASCO Power Technologies
Our largest, highest kA SPD, the XBS Series utilizes two separate, dual redundant replaceable modules that work in parallel. With Large Block 50kA Thermal Protected MOV ’s with surge current levels of 600kA, 800kA and 1000kA per phase, this unit is for those “Mission Critical ”... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel
- Surge Current: 1.00E6
from Transtector Systems, Inc.
AC surge protector (also known as SPD or lightning protector) 1101-1023 from Transtector is a panel style SPD that utilizes state of the art MOV technology to protect critical equipment that operates on a 120 Vac Single-Phase electrical service. This surge protector pro-vides effective protection... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel
- Surge Current: 30000
from MCG SURGE PROTECTION
Features: I peak=160,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition Listed. Triple redundant - three fused surge paths/phase. Remote 1 Form C relay contacts with status LED. Neutral to Ground voltage monitor. Front panel protection status LEDs. Low profile design. All modes protected. [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount
- Surge Current: 160000
from ASCO Power Technologies
The XCS Series utilizes large Block 50kA Thermal Protected MOV ’s with surge current levels of 100kA per phase. With a compact economical design and line or load side installation flexibility, this unit can be installed anywhere in any electrical distribution system. FEATURES: UL 1449 Third... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel
- Surge Current: 100000
from Transtector Systems, Inc.
The SP Plus provides all mode system protection and integrity for critical applications. A compact design listed to UL 1449 4th Edition with robust surge capacity for long life and easy installation makes this unit ideal for all your surge protection requirements. [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 120-480 Vac
- Surge Current: 50000 to 100000
- Technology: Metal Oxide Varistor
- Operating Temp: -40 to 185
from MCG SURGE PROTECTION
Features: I peak=250,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition Listed. Triple redundant - three fused surge paths/phase. Remote 1 Form C relay contacts with status LED. Neutral to Ground voltage monitor. Front panel protection status LEDs. Low profile design. All modes protected. [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount
- Surge Current: 250000
from ASCO Power Technologies
The XDS Series utilizes large Block 50kA Thermal Protected MOV ’s with surge current levels of 100kA, 150kA and 200kA per phase. With line or load side installation flexibility, this unit is a great fit from the service entrance all the way down to each distribution and/or branch panel. [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel
- Surge Current: 100000
from MCG SURGE PROTECTION
Features: I peak=40,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition Listed. Remote 1 Form C relay contacts with status LED. Neutral to Ground voltage monitor. Front panel protection status LEDs. Low profile design. All modes protected. Filtering standard. Thermally protected MOVs. 20 Year... [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount
- Surge Current: 40000
from ASCO Power Technologies
The XRS Series utilizes uni-modular replaceable module design with Large Block 50kA Thermal Protected MOV ’s with surge current levels of 100kA, 150kA, 200kA, 250kA and 300kA per phase. FEATURES: UL 1449 Third Edition Listed. 100kA – 300kA per phase ratings. Type 4 SPD for intended Use... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Device Mount
- Surge Current: 100000
from MCG SURGE PROTECTION
Features: I peak=80,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition Listed. Remote 1 Form C relay contacts with status LED. Neutral to Ground voltage monitor. Front panel protection status LEDs. Low profile design. All modes protected. Filtering standard. Thermally protected MOVs. 20 Year... [See More]
- Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
- Technology: Metal Oxide Varistor
- Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount
- Surge Current: 80000
from ASCO Power Technologies
Our highest kA internal-mount SPD, the XWS Series utilizes uni-modular replaceable module design with Large Block 50kA Thermal Protected MOV ’s with surge current levels of 300kA, 400kA, and 500kA per phase. This unit is for those “Mission Critical ” environments. FEATURES: UL 1449... [See More]
- Voltage: 120
- Technology: Metal Oxide Varistor
- Mounting: Device Mount
- Surge Current: 300000