240 Single Phase Surge Suppressors

46 Results
Transient/Surge Absorber -- Model 1P-240
from Time Mark Corporation

Transient/Surge Absorbers (TSAs) provide system designers with a cost effective method of protecting sensitive electrical and electronic equipment from damage caused by switching transients, coil and motor backlash, and near miss lightning strikes. There are 3 models available: single-phase (1P),... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Plug-in
  • Maximum AC Power: 25000
400 Series OEM Surge Protection -- Model 417
from MCG SURGE PROTECTION

Max. Continuous Operating VAC: 130% Rated Line Voltage. Response Time: <5 Nanoseconds. Modes of Protection: L-N, L-G, N-G. Surge Current (8x20us): 1 Event - 10kA, 100 Events - 2kA, 1000 Events - 1kA, 10,000 Events - 500A. Status Indicators: Green LED. Operating Altitude: 13,000 ft. (4000m). Temp. [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount; In-line or Integrally Attached
  • Surge Current: 10000
SPDee Series -- S50A240V1P2
from ASCO Power Technologies

The SPDee Series utilizes large Block 50kA Thermal Protected MOV ’s with surge current levels of 50kA per mode. The unit is a perfect replacement to the obsolete surge arrestors. With a small, compact design and line or load side installation flexibility, this unit can be installed anywhere in... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel (optional feature); DIN Rail (optional feature); Pipe Nipple
  • Surge Current: 50000
Equpment Level AC Surge Protector -- DS70US
from CITEL SURGE PROTECTION

The DS70US is a universal SPD for the most demanding AC Power applications. The DS70US Series protects any single or three phase voltage up to 690Vac from the effects of lightning and switching transients. These SPD are approved to the new UL1449 4th Edition (effective March. 2016) and have... [See More]

  • Voltage: 120; 240; 480; 600; 120/240; 120/208; 277/480; 347/600; 240-415 V, 400-690 V
  • Operating Temp: -40 to 185
  • Mounting: DIN Rail
  • Standards: IEC; UL
587B062LP
from ProTek Devices

Low Profile 240V AC Power Line Surge Suppressor FEATURES. • IEC 61000-4-5 (Surge): 1kA, 8/20 µs - Level 4(Line-Line) & 333A Level 4(Line-Ground). • Meets ANSI/IEEE C62.41 Outdoor Requirements. • Listed to CSA, File LR65240. • Differential and Common Mode Protection. [See More]

  • Voltage: 240
  • Surge Current: 3000
AC Panel Surge Protector SPD -- SP Series
from Transtector Systems, Inc.

The SP Series of AC panel surge protectors provides a full range of nominal operating voltages from 120 Vac to 600 Vac to support global AC surge protection requirements and voltages. The UL 1449 4th Edition design, uses thermally protected MOV technology to ensure robust, reliable, protection for... [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120-600, 120-480 Vac
  • Technology: Metal Oxide Varistor
  • Mounting: DIN Rail
  • Surge Current: 50000 to 100000
Surge Suppressor -- DSD11001S275
from Pentair, Inc.

. 17.5 MM W X 68 MM D X 90 MM H SIZE. SUB DISTRIBUTION PANEL USED ON. 0 TO 60 HZ FREQUENCY RATING. 2 AWG SOLID/4 AWG STRANDED WIRE CONNECTION TYPE. CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 220 TO 240 VAC VOLTAGE RATING. 35 MM DIN RAIL MOUNTING. NEMA 1, IP20 ENCLOSURE. -40 TO 80 DEG C... [See More]

  • Voltage: 220; 240
  • Surge Current: 100000
  • Mounting: DIN Rail
  • Operating Temp: -40 to 176
Surge Protective Devices -- 120LS-120S
from MCG SURGE PROTECTION

Features: 120LS: I peak=120,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition. NEMA LS1-1992. Three times redundant protection paths per phase. Employs new 40kA varistors with built in high-speed thermal disconnect. Solid copper bus bar construction. Field-replaceable modules. EMI/RFI noise... [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; Device Mount
  • Surge Current: 120000
TE/C -- TE/12C
from ASCO Power Technologies

Advanced Protection Technologies (APT) has been a worldwide leader in the surge suppression industry since 1985. APT ’s surge protection products have long set the standard for protection of commercial & industrial facilities. surgeassure ™ was formed to bring this same level of... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor; Gas Tubes (optional feature)
  • Mounting: Wall/Panel
  • Surge Current: 80000 to 150000
Service Entrance Type 1 Surge Protective Device, M50 Series
from CITEL SURGE PROTECTION

Characteristics,. - Surge Capacity to 50kA 8/20us per mode, 100kA 8/20us Total. - UL1449 Nominal Discharge Current (In) 20kA (All models). - UL1449 Short-circuit Current Rating (SCCR) 200kA (All models). - UL96A Master Label Compliant. - Hybrid TOV circuit provides immunity during high line... [See More]

  • Voltage: 120; 240; 140, 280, 230, 280, 320, 350, 400, 550, 560, 690 V
  • Operating Temp: -40 to 185
  • Mounting: In-line or Integrally Attached
  • Standards: CE Marking; UL
AC Surge Protector SPD APEX Panel 240 Vac Single-Phase SASD, MOV 30 kA, UL 94-5V -- 1101-610
from Transtector Systems, Inc.

AC surge protector (also known as SPD or lightning protector) 1101-610 from Transtector is a UL 94-5V panel style SPD that utilizes state of the art SASD/MOV technology to protect critical equipment that operates on a 240 Vac Single-Phase electrical service. This surge pro-tector provides effective... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor; Silicon Avalanche Diode
  • Mounting: Wall/Panel
  • Surge Current: 30000
Surge Suppressor -- DSD1101S275
from Pentair, Inc.

. 17.5 MM W X 68 MM D X 90 MM H SIZE. SUB DISTRIBUTION PANEL USED ON. 0 TO 60 HZ FREQUENCY RATING. 2 AWG SOLID/4 AWG STRANDED WIRE CONNECTION TYPE. CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 220 TO 240 VAC VOLTAGE RATING. 35 MM DIN RAIL MOUNTING. NEMA 1, IP20 ENCLOSURE. -40 TO 80 DEG C... [See More]

  • Voltage: 220; 240
  • Surge Current: 10000
  • Mounting: DIN Rail
  • Operating Temp: -40 to 176
Surge Protective Devices -- 120M-120S
from MCG SURGE PROTECTION

Features: 120,000 amps per phase. UL1449 3rd Edition. Field-replaceable, high capability protection modules with lifetime replacement warranty. High performance, low inductance MicroZ ™ -installed cable. (Click here). Event counter and front panel LEDs for status indication. LED internal... [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; Device Mount
  • Surge Current: 120000
TE/HP Series -- TE/12HP
from ASCO Power Technologies

Our H Series has one, replaceable module per phase and surge current levels of 120kA and 160kA per phase. Our lowest cost replaceable module product for “budget conscience ” projects. FEATURES: UL 1449 Third Edition Listed. 120kA & 160kA per phase ratings. Type 2 SPD – All UL... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel
  • Surge Current: 120000 to 160000
Type 2 AC Surge Protectors -- DS70RS
from CITEL SURGE PROTECTION

CITEL model DS70RS is a standard duty AC Surge Protector (SPD) used in distribution or control panel applications. The DS70RS is a single pole module. It is configurable for all 1, 2, and 3 phase application up to 70kA. UL1449 3rd Edition. (UL1449 4th Edition - Type 1CA for -400, -600 *Other... [See More]

  • Voltage: 120; 220; 240; 277; 277-347 V, 220-240 V, 120-127 V
  • Technology: Metal Oxide Varistor
  • Mounting: Symmetrical Rail 35 mm
  • Operating Temp: -40 to 185
AC Surge Protector SPD Brick 240 Vac Single-Phase 16 A SASD, MOV 14 kA -- 1101-571
from Transtector Systems, Inc.

AC surge protector (also known as SPD or lightning protector) 1101-571 from Transtector is a brick style SPD that utilizes state of the art SASD technology to protect critical equipment that operates on a 240 Vac Single-Phase electrical service. This surge protector provides effective protection... [See More]

  • Voltage: 240
  • Surge Current: 14000
  • Technology: Metal Oxide Varistor; Silicon Avalanche Diode
  • Operating Temp: -40 to 131
Surge Suppressor -- DSD1401S275
from Pentair, Inc.

. 17.5 MM W X 68 MM D X 90 MM H SIZE. SUB DISTRIBUTION PANEL USED ON. 0 TO 60 HZ FREQUENCY RATING. 2 AWG SOLID/4 AWG STRANDED WIRE CONNECTION TYPE. CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 220 TO 240 VAC VOLTAGE RATING. 35 MM DIN RAIL MOUNTING. NEMA 1, IP20 ENCLOSURE. -40 TO 80 DEG C... [See More]

  • Voltage: 220; 240
  • Surge Current: 40000
  • Mounting: DIN Rail
  • Operating Temp: -40 to 176
Surge Protective Devices -- 125M-120T
from MCG SURGE PROTECTION

Features: 120,000 amps per phase. UL1449 3rd Edition. Field-replaceable, high capability protection modules with lifetime replacement warranty. 8 Ft. installed cable. Front panel LED's for status indication. LED internal diagnostics for on-site maintenance. Audible fault alarm with mute switch. All... [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; Device Mount
  • Surge Current: 120000
TE/HPS Series -- TE/12HPS
from ASCO Power Technologies

Our H Series has one, replaceable module per phase and surge current levels of 80kA, 120kA and 160kA per phase. Our lowest cost replaceable module product for “budget conscience ” projects. FEATURES: UL 1449 Third Edition Listed. 80 kA, 120kA & 160kA per phase ratings. Type 2 SPD... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel
  • Surge Current: 80000 to 160000
Type 2 Multi-Pole AC Surge Protector -- DS240
from CITEL SURGE PROTECTION

CITEL model DS240 surge protectors are used mainly for distribution panels of single-phase and three-phase networks. They provide common-mode protection (between the active conductors and ground) and are available with an option remote alarm. The DS240 is built with a plug-in module and a fixed... [See More]

  • Voltage: 120; 208; 220; 240; 277
  • Operating Temp: -40 to 185
  • Mounting: Symmetrical Rail 35 mm
  • Standards: UL 1449 Third Edition; CE Marking; CSA Mark; IEC; UL; EN 61643-11: Europe; NF EN 61643-11: France
AC Surge Protector SPD MCP Brick 240 Vac Single-Phase SASD 3 kA -- 1101-172-2
from Transtector Systems, Inc.

AC surge protector (also known as SPD or lightning protector) 1101-172-2 from Transtector is a brick style SPD that utilizes state of the art SASD technology to protect critical equipment that operates on a 240 Vac Single-Phase electrical service. This surge protector pro-vides effective protection... [See More]

  • Voltage: 240
  • Technology: Silicon Avalanche Diode
  • Mounting: Wall/Panel
  • Surge Current: 3000
Surge Suppressor -- DSD1601SR275
from Pentair, Inc.

. 17.5 MM W X 68 MM D X 90 MM H SIZE. SUB DISTRIBUTION PANEL USED ON. 0 TO 60 HZ FREQUENCY RATING. 14 AWG WIRE CONNECTION TYPE. CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 220 TO 240 VAC VOLTAGE RATING. 35 MM DIN RAIL MOUNTING. NEMA 1, IP20 ENCLOSURE. -40 TO 80 DEG C OPERATING TEMPERATURE. [See More]

  • Voltage: 220; 240
  • Surge Current: 60000
  • Mounting: DIN Rail
  • Operating Temp: -40 to 176
Surge Protective Devices -- 160MXT-120T
from MCG SURGE PROTECTION

Features: 200,000 amps per phase. UL1449 3rd Edition. Independent lab tested modules. NEMA LS 1 Tested. Redundant modular protection withstands multiple lightning strikes. Solid copper bus bar construction for minimal impedance and enhanced current sharing. High performance, low inductance. Micro-Z... [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; Device Mount
  • Surge Current: 200000
TE/XGA Series -- TE/12XGA
from ASCO Power Technologies

With one, replaceable module per phase and surge current levels of 160kA and 240kA per phase, the XGA Series is a great fit for Service Entrance and Downstream applications. The XGA Features APT ’s Patented TranSafe ™ Circuitry. FEATURES: UL 1449 Third Edition Listed. 160kA & 240kA... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel
  • Surge Current: 80000 to 120000
AC Surge Protector SPD SP PLUS Brick 240 Vac Single-Phase MOV 50 kA, UL 1449 4th Ed. Type 1 and Type 2, CE, RoHS -- SP50-2401P
from Transtector Systems, Inc.

AC surge protector (also known as SPD or lightning protector) SP50-2401P from Transtector is a UL1449 4th Ed. Type 1/Type 2 brick style SPD that utilizes state of the art MOV technology to protect critical equipment that operates on a 240 Vac Single-Phase electrical service. This surge protector... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel
  • Surge Current: 50000
Surge Suppressor -- DSD1601SR440M
from Pentair, Inc.

. 17.5 MM W X 68 MM D X 90 MM H SIZE. SUB DISTRIBUTION PANEL USED ON. 0 TO 60 HZ FREQUENCY RATING. 14 AWG WIRE CONNECTION TYPE. CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 220 TO 240 VAC VOLTAGE RATING. 35 MM DIN RAIL MOUNTING. NEMA 1, IP20 ENCLOSURE. -40 TO 80 DEG C OPERATING TEMPERATURE. [See More]

  • Voltage: 220; 240
  • Surge Current: 60000
  • Mounting: DIN Rail
  • Operating Temp: -40 to 176
Surge Protective Devices -- 202XT-120T
from MCG SURGE PROTECTION

Features: 200,000 amps per phase, 8x20 us. Date & time of last event it handled/diverted displayed. Independent lab tested modules. UL1449 3rd Edition. NEMA LS 1. Redundant modular protection withstands multiple lightning strikes. Solid copper bus bar construction for minimal impedance and... [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; Device Mount
  • Surge Current: 200000
TeXAS Series -- TE12XAS10*
from ASCO Power Technologies

With surge current levels of 100kA, 150kA, 200kA, 250kA, 300kA, 400kA and 500kA per phase, our XAS Series is the SPD that covers most current SPD needs. With one replaceable module per unit containing Large Block 50kA Thermal Protected MOV ’s, this units low cost, reliability, flexibility and... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel
  • Surge Current: 100000
Modular AC Surge Protection Device -- SP PLUS Series
from Transtector Systems, Inc.

The SP Plus provides all mode system protection and integrity for critical applications. A compact design listed to UL 1449 4th Edition with robust surge capacity for long life and easy installation makes this unit ideal for all your surge protection requirements. [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 120-480 Vac
  • Surge Current: 50000 to 100000
  • Technology: Metal Oxide Varistor
  • Operating Temp: -40 to 185
Surge Suppressor -- SES402401P
from Pentair, Inc.

. COMPACT TYPE. 3.9 INCH W X 3.43 INCH D X 2.44 INCH H SIZE. SERVICE ENTRANCE, DISTRIBUTION PANEL USED ON. 0 TO 60 HZ FREQUENCY RATING. 12 AWG WIRING LEAD CONNECTION TYPE. UL (CANADA AND US), UL 1449, CE APPROVAL. INDOOR/OUTDOOR, PHOTOVOLTAIC SYSTEM APPLICATION. 240 V VOLTAGE RATING. 3/4 INCH... [See More]

  • Voltage: 240
  • Operating Temp: -40 to 176
  • Surge Current: 40000
  • Wires: 2-Wire
Surge Protective Devices -- 402XT-120T
from MCG SURGE PROTECTION

Features: 400,000 Amps per phase 8x20 us. Date & time of last event it handled/diverted displayed. Independent lab tested modules. UL1449 3rd Edition. NEMA LS 1 Tested. High capability redundant modular protection withstands multiple lightning strikes. Solid copper bus bar construction for... [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; Device Mount
  • Surge Current: 400000
TeXBS Series -- TE12XBS1K*
from ASCO Power Technologies

Our largest, highest kA SPD, the XBS Series utilizes two separate, dual redundant replaceable modules that work in parallel. With Large Block 50kA Thermal Protected MOV ’s with surge current levels of 600kA, 800kA and 1000kA per phase, this unit is for those “Mission Critical ”... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel
  • Surge Current: 1.00E6
Surge Suppressor -- TDS11002SR240
from Pentair, Inc.

. COMPACT TYPE. 35 MM W X 68 MM D X 90 MM H SIZE. DISTRIBUTION PANEL BOARD, MOTOR CONTROL CENTER, SUB DISTRIBUTION PANEL USED ON. 0 TO 100 HZ FREQUENCY RATING. 14 AWG WIRE CONNECTION TYPE. UL 1449, CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 220 TO 240 VAC VOLTAGE RATING. 35 MM DIN RAIL... [See More]

  • Voltage: 220; 240
  • Surge Current: 100000
  • Mounting: DIN Rail
  • Operating Temp: -40 to 176
Surge Protective Devices -- PT120-120S
from MCG SURGE PROTECTION

Features: I peak=120,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition Listed. Triple redundant - three fused surge paths/phase. Remote 1 Form C relay contacts with status LED. Neutral to Ground voltage monitor. Front panel protection status LEDs. Low profile design. All modes protected. [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount
  • Surge Current: 120000
TeXCS Series -- TE12XCS104X
from ASCO Power Technologies

The XCS Series utilizes large Block 50kA Thermal Protected MOV ’s with surge current levels of 100kA per phase. With a compact economical design and line or load side installation flexibility, this unit can be installed anywhere in any electrical distribution system. FEATURES: UL 1449 Third... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel
  • Surge Current: 100000
Surge Suppressor -- TDS1501SR277
from Pentair, Inc.

. COMPACT TYPE. 17.5 MM W X 68 MM D X 90 MM H SIZE. DISTRIBUTION PANEL BOARD, MOTOR CONTROL CENTER, SUB DISTRIBUTION PANEL USED ON. 0 TO 100 HZ FREQUENCY RATING. 14 AWG WIRE CONNECTION TYPE. UL 1449, CE APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 240 TO 277 VAC VOLTAGE RATING. 35 MM DIN RAIL... [See More]

  • Voltage: 240; 277
  • Surge Current: 50000
  • Mounting: DIN Rail
  • Operating Temp: -40 to 176
Surge Protective Devices -- PT160-120S
from MCG SURGE PROTECTION

Features: I peak=160,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition Listed. Triple redundant - three fused surge paths/phase. Remote 1 Form C relay contacts with status LED. Neutral to Ground voltage monitor. Front panel protection status LEDs. Low profile design. All modes protected. [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount
  • Surge Current: 160000
TeXDS Series -- TE12XDS104X
from ASCO Power Technologies

The XDS Series utilizes large Block 50kA Thermal Protected MOV ’s with surge current levels of 100kA, 150kA and 200kA per phase. With line or load side installation flexibility, this unit is a great fit from the service entrance all the way down to each distribution and/or branch panel. [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel
  • Surge Current: 100000
Surge Suppressor -- TDS50240
from Pentair, Inc.

. COMPACT TYPE. 36 MM W X 68 MM D X 90 MM H SIZE. ELECTRICAL PANEL, ELECTRICAL EQUIPMENT USED ON. 50/60 HZ FREQUENCY RATING. 18 TO 10 AWG WIRE CONNECTION TYPE. UL 1449, CSA 22.2, CE, NOM APPROVAL. 240 VAC VOLTAGE RATING. 35 MM DIN RAIL MOUNTING. NEMA 1, IP20 ENCLOSURE. -35 TO 55 DEG C OPERATING... [See More]

  • Voltage: 240
  • Surge Current: 10000 to 20000
  • Mounting: DIN Rail
  • Operating Temp: -31 to 131
Surge Protective Devices -- PT250-120S
from MCG SURGE PROTECTION

Features: I peak=250,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition Listed. Triple redundant - three fused surge paths/phase. Remote 1 Form C relay contacts with status LED. Neutral to Ground voltage monitor. Front panel protection status LEDs. Low profile design. All modes protected. [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount
  • Surge Current: 250000
TeXRS Series -- TE12XRS10*
from ASCO Power Technologies

The XRS Series utilizes uni-modular replaceable module design with Large Block 50kA Thermal Protected MOV ’s with surge current levels of 100kA, 150kA, 200kA, 250kA and 300kA per phase. FEATURES: UL 1449 Third Edition Listed. 100kA – 300kA per phase ratings. Type 4 SPD for intended Use... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Device Mount
  • Surge Current: 100000
Surge Suppressor -- TDX100C240
from Pentair, Inc.

. COMPACT TYPE. 84 MM W X 72 MM D X 155 MM H SIZE. MAIN DISTRIBUTION PANEL USED ON. 50/60 HZ FREQUENCY RATING. 24 INCH 10 AWG FLYING LEAD WIRE (LINE), 36 INCH 10 AWG FLYING LEAD WIRE (NEUTRAL/GROUND) CONNECTION TYPE. UL 1449, CE, C-TICK APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 240 VAC... [See More]

  • Voltage: 240
  • Operating Temp: -40 to 176
  • Surge Current: 100000
  • Wires: 2-Wire
Surge Protective Devices -- PT40-120S
from MCG SURGE PROTECTION

Features: I peak=40,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition Listed. Remote 1 Form C relay contacts with status LED. Neutral to Ground voltage monitor. Front panel protection status LEDs. Low profile design. All modes protected. Filtering standard. Thermally protected MOVs. 20 Year... [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount
  • Surge Current: 40000
TeXWS Series -- TE12XWS31*
from ASCO Power Technologies

Our highest kA internal-mount SPD, the XWS Series utilizes uni-modular replaceable module design with Large Block 50kA Thermal Protected MOV ’s with surge current levels of 300kA, 400kA, and 500kA per phase. This unit is for those “Mission Critical ” environments. FEATURES: UL 1449... [See More]

  • Voltage: 240
  • Technology: Metal Oxide Varistor
  • Mounting: Device Mount
  • Surge Current: 300000
Surge Suppressor -- TDX50C240
from Pentair, Inc.

. COMPACT TYPE. 84 MM W X 72 MM D X 155 MM H SIZE. SUB DISTRIBUTION PANEL USED ON. 50/60 HZ FREQUENCY RATING. 24 INCH 10 AWG FLYING LEAD WIRE (LINE), 36 INCH 10 AWG FLYING LEAD WIRE (NEUTRAL/GROUND) CONNECTION TYPE. UL 1449, CE, C-TICK APPROVAL. POWER DISTRIBUTION SYSTEM APPLICATION. 240 VAC... [See More]

  • Voltage: 240
  • Operating Temp: -40 to 176
  • Surge Current: 50000
  • Wires: 2-Wire
Surge Protective Devices -- PT80-120S
from MCG SURGE PROTECTION

Features: I peak=80,000A/Phase (8 x 20 μs waveform). UL1449 3rd Edition Listed. Remote 1 Form C relay contacts with status LED. Neutral to Ground voltage monitor. Front panel protection status LEDs. Low profile design. All modes protected. Filtering standard. Thermally protected MOVs. 20 Year... [See More]

  • Voltage: 120; 208; 220; 240; 277; 346; 380; 480; 600; 120/240
  • Technology: Metal Oxide Varistor
  • Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount
  • Surge Current: 80000