Polyethylene (PE) Electrical Connector Bases and Covers
from Daemar Inc.
The C series caps are straight-sided, thin-walled closures designed to protect threaded connectors. The flanged end allows for easy installation and removal in difficult to reach areas. This versatile design is ideal for a variety of threaded and non-threaded applications. Material: Low-Density... [See More]
- Material: Polyethylene (PE)
- To Fit Thread / Diameter: 0.8750
- Type: Cap
- Features: Conductive
from Polymer Molding, Inc.
Designed to mate with male-threaded electrical connectors. The flange located on the top surface enables the part to be easily removed. This versatile design also allows these parts to be used in many other capping applications. Typical wall thickness: .032. Color: Red. Material: Low Density... [See More]
- Material: Polyethylene (PE)
- Shape / Application: Round
- Type: Cap
- To Fit Thread / Diameter: 0.5000
from Daemar Inc.
Series CBC Coaxial Cable Connector Caps are used to protect cable connectors during packaging and shipping. Designed to fit a nominal 3/8 inch diameter, these tethered caps snap securely to keep out dirt and moisture. Material: Low-Density Polyethylene Color: Black [See More]
- Material: Polyethylene (PE)
- To Fit Thread / Diameter: 0.3750
- Type: Cap
- Features: Conductive
from Polymer Molding, Inc.
YP Series Plugs are designed to plug female-threaded electrical connectors. Flange is located on the top surface for easy removal. This series, although designed as plugs, are often used as caps in non-standard applications. Typical wall thickness: .032. Color: Yellow. Material: Low Density... [See More]
- Material: Polyethylene (PE)
- To Fit Thread / Diameter: 0.6700
- Shape / Application: Round
from Daemar Inc.
For all common sizes of threaded electrical and electronic connectors, Caplugs CEC Conductive Caps are also suitable for protecting non-threaded bayonet type connectors. In addition to dissipating electrostatic charges, they provide an electrical shield over the end of the connector. All static... [See More]
- Material: Polyethylene (PE)
- To Fit Thread / Diameter: 0.2500
- Type: Cap
- Features: Static Dissipative and Conductive; Conductive
from Daemar Inc.
Caplugs Series CEG Edge Liners securely grip each contact of edgeboard connectors and are also used for single in-line devices. These extruded conductive edge liners are the most cost-effective way to provide both ESD and physical protection for circuit boards and subassemblies. All static... [See More]
- Material: Polyethylene (PE)
- Features: Static Dissipative and Conductive; Conductive
- Type: Cap
from Daemar Inc.
Designed to plug the more popular sizes of both threaded and non-threaded, bayonet type electrical and electronic connectors, CEP Conductive Plugs provide electrical shielding as well as mechanical protection. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and... [See More]
- Material: Polyethylene (PE)
- To Fit Thread / Diameter: 0.0044
- Type: Cap
- Features: Static Dissipative and Conductive; Conductive
from Daemar Inc.
DCC Series Caplugs are designed to provide electrostatic discharge protection of rectangular D-subminiature input/output type connectors. Molded with an integral flange to enable easy application and removal, Series DCC is available in either black conductive or pink static dissipative ethylene... [See More]
- Material: Ethyl Vinyl Acetate (EVA) (optional feature); Polyethylene (PE)
- Features: Static Dissipative and Conductive; Conductive
- Type: Cap
from Daemar Inc.
Series DCF connector caps protect electrical connectors from dust and impact damage. DCF-06 and DCF-08 are designed to fit D-Subminiature connectors with flared shells while DCF-07 is designed to fit D-Subminiature power connectors with flared shells. Series DCF is available in black conductive... [See More]
- Material: Polyethylene (PE)
- Features: Static Dissipative and Conductive; Conductive
- Type: Cap
from Daemar Inc.
DP Series Conductive Caplugs are designed to dissipate electrostatic charges, and provide mechanical protection and electrical shielding for ITT Cannon style connectors commonly used in aerospace and military applications. All static dissipative parts meet the static decay requirements of... [See More]
- Material: Polyethylene (PE)
- Features: Static Dissipative and Conductive; Conductive
- Type: Cap
from Daemar Inc.
The E series straight-sided, thin-walled closures are designed to protect threaded connectors. The flanged end makes for easy removal in hard-to-reach areas. The versatile design of these plugs make them ideal for use in a variety of threaded and non-threaded applications. Material: Low-Density... [See More]
- Material: Polyethylene (PE)
- To Fit Thread / Diameter: 0.7500
- Type: Cap
- Features: Conductive
from Daemar Inc.
Made to protect threaded connectors, Series EC Caps are designed for easy application and removal in areas not readily accessible. They can be installed over threads or cylindrical surfaces. Material: Low-Density Polyethylene Color: Red Applicable Specs: MS-90376-R, NAS-813, NAS-831 [See More]
- Material: Polyethylene (PE)
- To Fit Thread / Diameter: 0.6250
- Type: Cap
- Features: Conductive
from Daemar Inc.
EMC Series Caplugs fit 36- and 68-pin Champ 050 series connector caps and 50-pin Champ-type connectors. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 12 ohms/sq. All conductive parts meet the static decay requirements of... [See More]
- Material: Ethyl Vinyl Acetate (EVA) (optional feature); Polyethylene (PE)
- Features: Static Dissipative and Conductive; Conductive
- Type: Cap
from Daemar Inc.
Made to serve as dust and protective closures for threaded connectors, Series EP Plugs are designed for easy application and removal in areas not readily accessible. They can be installed to fit threaded or smooth cylindrical surfaces. Material: Low-Density Polyethylene Color: Yellow Applicable... [See More]
- Material: Polyethylene (PE)
- To Fit Thread / Diameter: 0.0061
- Type: Cap
- Features: Conductive
from Daemar Inc.
These non-conductive plugs are used for female connectors. Use these inexpensive plugs to protect your connectors during transit and storage. The IEC series will keep your connector free of dust, moisture and contaminants. A flanged end offersease of installation and removal. We launched this series... [See More]
- Material: Polyethylene (PE)
- Features: Conductive
- Type: Cap
from Daemar Inc.
Series MDC connector caps are designed to fit Micro-DC connectors. Series MDC is available in black conductive polyethylene or pink static dissipative polyethylene. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 12 ohms/sq. [See More]
- Material: Ethyl Vinyl Acetate (EVA) (optional feature); Polyethylene (PE)
- Features: Static Dissipative and Conductive; Conductive
- Type: Cap
from Daemar Inc.
Contact factory for information on black conductive polyethylene plugs for protecting RJ telephone type jacks on computers. Material: Conductive Polyethylene Color: Black [See More]
- Material: Polyethylene (PE)
- Features: Conductive
- Type: Cap
from Daemar Inc.
Static Dissipative EC Series Caplugs provide positive ESD and physical protection for all common sizes of threaded electrical and electronic connectors. Also suitable for protecting non-threaded bayonet type connectors. All static dissipative parts meet the static decay requirements of... [See More]
- Material: Polyethylene (PE)
- To Fit Thread / Diameter: 0.6250
- Type: Cap
- Features: Static Dissipative and Conductive; Conductive
from Daemar Inc.
SEP plugs are designed to fit inside both threaded and non-threaded bayonet-type connectors. All static dissipative Caplugs provide a surface resistivity in the range of at least 1x105 ohms/sq, but less than 1x1012. They also meet the static decay test requirements of MIL-PRF-81705D. Material:... [See More]
- Material: Polyethylene (PE)
- To Fit Thread / Diameter: 2.01
- Type: Cap
- Features: Static Dissipative and Conductive; Conductive
from Daemar Inc.
These non-conductive plugs protect type B USB ports. Use these inexpensive plugs to shield female ports from dust, moisture, and contaminants. Caplugs USB plugs have a convenient pull-tab for quick and easy removal. We launched this series the USB-B, and continue to develop new sizes. Material:... [See More]
- Material: Polyethylene (PE)
- Features: Conductive
- Type: Cap