Double Seal Insert Bearings
from RS Components, Ltd.
High temperature radial insert ball bear [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 0.6693
from RS Components, Ltd.
High temperature radial insert ball bear [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 0.7874
from RS Components, Ltd.
High temperature radial insert ball bear [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 0.9843
from RS Components, Ltd.
High temperature radial insert ball bear [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 1.1811
from RS Components, Ltd.
High temperature radial insert ball bear [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 1.3780
from RS Components, Ltd.
High temperature radial insert ball bear [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 1.5748
from RS Components, Ltd.
High temperature radial insert ball bear [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 1.7717
from RS Components, Ltd.
High temperature radial insert ball bear [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 1.9685
from Noma Bearing Corporation
The 88000 series bearings is similar in function to the 8000 and 8700 series except that it features an extended inner ring on both sides to provide additional shaft sup port. When assembled with the proper press fit, the extra width of the inner ring provides a more firm grip on the shaft reducing... [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 0.4331
from WD Bearing Group
Pillow blocks, the most commonly used type of mounted units, are housings which have a bearing fitted into them. They are designed to provide shaft support where the mounting surface is parallel to the shaft axis. Typically manufactured from cast iron or cast steel, the pillow block bearing housing... [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 0.5906
from SKF/Global
Y-bearings of this type are delivered exclusively with the rugged standard "Superagriseal" fitted with additional plain sheet steel flingers. The outer ring has two lubrication holes as standard. [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 0.7874
from SKF/North America
SKF Y-bearings for high temperatures correspond in design to the appropriate Y-bearings in the YAR 2-2FW series with grub screws. [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 0.7500
from Noma Bearing Corporation
The 88000 series bearings is similar in function to the 8000 and 8700 series except that it features an extended inner ring on both sides to provide additional shaft sup port. When assembled with the proper press fit, the extra width of the inner ring provides a more firm grip on the shaft reducing... [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 0.6693
from SKF/Global
Y-bearings with grub screws in the inner ring are locked in position on the shaft by tightening the two cup point hexagonal grub (set) screws, positioned 120 ° apart. The bearings are suitable for applications where the direction of rotation is constant or alternating. Two different standard... [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 0.5000
from SKF/North America
Y-bearings with an eccentric locking collar are intended primarily for use in applications where the direction of rotation is constant. On one side of the bearing inner ring is an eccentric extension that fits the locking collar. Turning the locking collar on the inner ring extension in the... [See More]
- Seals: Double Seal
- Design Units: Metric
- Ball Type: Ball
- Bore: 0.7500