Component / Sub-system Spray Painting Equipment (Paint Sprayers)
from Sames North American Corporation
The output pressure of this pneumatically operated valve is adjusted by changing the control air pressure. The changes can be achieved by manual adjustments of the air pressure or by changing the strength of the electronic flow rate signal (0 to 10v DC or 0 to 4095 Dnet). The 1R System can dispense... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Sames North American Corporation
The AutoStream 2K Control Unit can dispense multi component materials precisely in ratio and volume applied. It completely secures the process with high precision and total control of the parameters. Performance. 2K ratio available: 1:1, 2:1 and 4:1. Pressure ratio: up to 13:1. Volume to dispense:... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Sames North American Corporation
High flow rates. 50 years of experience. Reduced overspray. Performance. Excellent finish quality due to very fine atomization at medium to high flow rates. Productivity. Reduced cost of ownership for high productivity. Compact design. Sustainability. Sustainability with limited number of parts. [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Airless
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Sames North American Corporation
High transfer efficiency. Outstanding finish quality. Designed for high solids & solvent-free materials. ► For configurations & part numbers, please refer to the Documents tab. Performance. Index knob adjustments of fluid output allows for precise output accuracy. Fan width control... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Sames North American Corporation
Answers to high production Airspray rates. Ideal for high precision & small output applications. Designed for high viscosity materials. ► For configurations & part numbers, please refer to the Documents tab. Performance. Index knob adjustments of fluid output allows for precise output... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Sames North American Corporation
High transfer efficiency (up to 72%). Good finish quality. Perfect compromise between HPA and HVLP technologies. ► For configurations & part numbers, please refer to the Documents tab. Performance. Index knob adjustments of fluid output allows for precise output accuracy. Fan width control... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Sames North American Corporation
High transfer efficiency. Outstanding finish quality. High reliability. ► For configurations & part numbers, please refer to the Documents tab. Performance. Index knob adjustments of fluid output allows for precise output accuracy. Fan width control for a finish quality & fan pattern... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Sames North American Corporation
Answers to high production Airspray rates. Designed for high viscosity material. Modular design & high reliability. ► For configurations & part numbers, please refer to the Documents tab. Performance. Index knob adjustments of fluid output allows for precise output accuracy. Fan width... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Sames North American Corporation
High transfer efficiency (up to 72%). Good finish quality. Modular design & high reliability. ► For configurations and part numbers, please refer to the Documents tab. Performance. Index knob adjustments of fluid output allows for precise output accuracy. Fan width control delivers a high... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Sames North American Corporation
Like the previous generation of ACCUBELL ® system, this atomizer still includes an insulated paint reservoir that allows: loading of the necessary paint volume. applying high voltage to the paint for the most efficient technology - internal charge. control the flow rate with pinpoint accuracy. [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Sames North American Corporation
The ASB automatic spray gun offers superior atomization whatever the line speed thanks to perfect balance between high pressure and high flow rate. It offers precise application - coating applied directly on the target - due to fast response time. Description. Premium Airless application. The... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Airless
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun; Feeder / Metering Unit
from Sames North American Corporation
Stainless steel design to handle water-based & solvent-based materials. High precision regulation. Constant fluid outlet [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Sames North American Corporation
Stainless steel design to handle water-based & solvent-based materials. High precision regulation. Remote control & optimal regulation accuracy [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Sames North American Corporation
Perfectly balanced, the FPro S suction paint spray gun provides a superior finish for all levels of painters. SAMES offers the largest range of spray guns and accessories for all FPro applications in high-end finishing markets. Professional Finishing For All Painters!. Breakthrough in Airspray... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun; Feeder / Metering Unit; Pressure Tank, Pot or Hopper
from Sames North American Corporation
SAMES Airspray Tanks are dedicated to all the applications: from a light aluminum 2L (0.5 gal) to feed a touch-up gun to a heavy duty 7 bar (100 psi) 50L (13 gal) stainless steel tank for high production. Easy to work with: Easy to use, easy maintenance. New Premium Agitator: Lube-free and very high... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit; Pressure Tank, Pot or Hopper
from Sames North American Corporation
Complete stainless steel fluid passage. 50 years of experience. High cycling rate (opening / closing). ► For configurations & part numbers, please refer to the Documents tab. Performance. Very fine atomization at medium to high flow delivery for excellent finish quality. Very limited... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Airless
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Sames North American Corporation
The Auto Color Medium Pressure Color Change System can be used with SAMES standard Airmix ® automatic & manual spray guns. Each system includes: floor mounting stand, 6" color touchscreen PLC control panel with 4 to 19 color preset capabilities, color valve stack including air/solvent purge... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Sames North American Corporation
High flexibility. High performance. Simplicity. Performance. AUTOSTREAM enables continuous control & monitoring of performance ensuring constant bead or spray pattern quality saving time & money. AUTOSTREAM is compatible with our family of dosing applicators & is used for extrusion,... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Sames North American Corporation
High transfer efficiency (up to 86%*). Excellent atomization quality. Modular design & high reliability. Performance. Dual spring mounted outside fluid passage allows you to open air before atomizing fluid for better spray fan quality. VX24 (adjustable spray) or VX124 (fix spray) and a large... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Sames North American Corporation
Easy to use. Heated version. Protected by a box. ► For configurations and part numbers, please refer to the Documents tab. Performance. Control and sign Regulex shotmeter. Constant or variable diameter at constant speed. Constant or variable diameter at variable speed. Productivity. Esay to... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Sames North American Corporation
A patented dosing principle, optimized waste management and connectivity make the Cyclomix® Evo the modular dosing unit that will meet your expectations. [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted; Airless (optional feature); Electrostatic
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Sames North American Corporation
Capable of metering 1 component as well as mixing 2 and 3 component materials. Flexible modular design - up to 24 programmable components. PH version available for acid-catalyzed coatings. Handles up to 50 recipes. Constant flow technology. Performance. Production flush 5-step programmable sequence. [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Airless
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Sames North American Corporation
The filter bypass can be used in either Airmix ®, airless or airspray applications. Constructed using all stainless steel components for use with a variety of coatings. Performance. Eliminates downtime. Eliminates contamination. Easily installed. Productivity. Less downtime. Quickly re-route to... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Sames North American Corporation
The FCR standard cabinet is specifically designed to supply and control powder spraying operations in a ventilated booth. It can accommodate the CRN457, REV800, MCR, TCR and VCR modules. The FCR comes as a bare cabinet with a front panel for installing standard 19 ’ ’ control units, an... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Sames North American Corporation
Perfectly balanced, the FPro spray gun provides a superior finish for all painters. SAMES offers the largest range of spray guns and accessories for all FPro applications in the high finishing markets. Description. New Standard in Airspray. Performance At Your Fingertips. Effortlessly Perfect... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Feeder / Metering Unit
from Walther Pilot North America
Fully automatic spray gun for a wide range of fine spraying jobs, especially dot marking operations. Extremely short switching times. With pull bar for manual cleaning. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Name: Model 2100 Gun and 1 Qt. Drip-Free Siphon Cup. Part Number: 98-2650. Gun Category: Conventional. Gun Type: Manual. Fluid Passages: Stainless Steel. Fluid Inlets: 3/8" NPS (m). Air Inlet: 1/4" NPS (m). Weight: 28 oz. Construction: Drop-Forged Aluminum. Colors: Blue. Cup: 81-800 [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
Conventional/Pressure-Feed Guns [See More]
- Equipment Type: Component or Sub-system
- Features: PressureFeed
- Options / Components: Applicator / Gun
from Aervoe Industries Incorporated
Transform aerosol cans into spray guns, eliminate finger fatigue [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
- Mounting: Handheld
from Air Compressors Direct
Two Types of Spray Guns In One. •Changes from siphon-feed to pressure-feed spray gun. Works With Standard Or Tank Less Air Compressors. •Convertible from non-bleeder to bleeder styles. Versatile. •Works with paint tanks and remote canisters [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Walther Pilot North America
Fully automatic spray gun for a wide range of fine spraying jobs, especially in the pharmaceutical and food industry. All wetted parts are made of stainless steel.. Extremely short switching times. With pull bar for manual cleaning. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
2100 Conventional Spray Gun, Hoses, includes: 2 Quart Regulated Pressure Cup. 6' Air Hose Assembly. 6" Fluid Hose Assembly [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
Need a 81-800 cup [See More]
- Equipment Type: Component or Sub-system
- Features: Suction or Venturi Feed
- Options / Components: Applicator / Gun
from Air Compressors Direct
Two Types of Spray Guns In One. •Easily changes from siphon to pressure-feed by twisting a knob. Works With Standard Or Tank Less Air Compressors. •Convertible from non-bleeder to bleeder styles. Versatile. •Works with paint tanks and remote canisters. Adjustable. •Pattern... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Walther Pilot North America
This compact size automatic spray gun is ideally suited for use with robots. The hard coated gun body is ideal for applications in the food processing industry (before processing in the US). Flat jet and round jet can be externally controlled. Wide choice of nozzle sizes. The needles and nozzles are... [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Name: Model 2100. Part Number: 2100 (user selects). Gun Category: Conventional. Gun Type: Manual. Fluid Passages: Stainless Steel. Fluid Inlet: 3/8" NPS (M). Air Inlet: 1/4" NPS (M). Weight: 24 oz. Construction: Aluminum. Color: Blue [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
Need a TLC-555 cup [See More]
- Equipment Type: Component or Sub-system
- Features: Suction or Venturi Feed
- Options / Components: Applicator / Gun
from Air Compressors Direct
Great Choice In An Economical Spray Gun. •Sprays low to medium viscosity materials. Maneuverability. •Sprays in areas other gun types cannot. Produces Fine Finishes. •For most autos, furniture and equipment painting. Includes. •One-quart anti-drip canister. Adjustable. [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Walther Pilot North America
Automatic spray gun, round and wide jet can be separately controlled. Material volume regulation through notch-type fine adjustment. With pull bar for manual cleaning operation. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Name: Model 7. Part Number: 6100. Gun Category: Conventional. Gun Type: Manual. Fluid Passages: Stainless Steel. Fluid Inlets: 3/8" NPS (m). Air Inlet: 1/4" NPS (m). Weight: 28 pz. Construction: Drop-Forged Aluminum. Colors: Black [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
The D-2000 Downdraft is Spray Systems ’ premier booth. Using the true downdraft air design, the air flows over the top of the vehicle, around the sides, and is pulled down through the filters beneath grating, set in a trench/pit. The downdraft air movement creates an environment where little... [See More]
- Equipment Type: Component or Sub-system
- Air Flow: 12600.0
- Options / Components: Walk-in Room Type Booth
from Air Compressors Direct
Compatible With Advanced Coatings. •Stainless fluid needle and nozzle. Maneuverability. •Sprays in areas other gun types can not. Built-In Air Adjusting Valve. •Provides easy adjustment a tool. Includes. •One-quart anti-drip canister. Adjustable. •Pattern, material and... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Walther Pilot North America
The PILOT WA 400 series guns operate without internal control. Round and wide jet can be adjusted separately. Body: aluminum. Front body and all wetted parts: stainless steel. Material volume regulation through notch-type fine adjustment. Spray gun versions for external control available on request. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Name: Model 7D. Part Number: 6101. Gun Category: Conventional. Gun Type: Manual. Fluid Passages: Plated Brass. Fluid Inlets: 1/2" NPS (m). Air Inlet: 1/4" NPS (m). Weight: 1 lb. 14 oz. Construction: Drop-Forged Aluminum. Colors: Black [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
The Front Flow booth draws air in through filtered front doors, and exhausts the air out through the filter banks located at the rear of the booth. This traditional style booth has been a favorite among painters for years in providing a clean environment to work and paint. Technical specifications... [See More]
- Equipment Type: Component or Sub-system
- Air Flow: 12600.0
- Options / Components: Walk-in Room Type Booth
from Air Compressors Direct
General Purpose Spray Gun. •1 quart paint cup is great for any small project. Average Air Consumption 20 CFM At 50 PSI. •Works with many brands of air compressor. All Metal Construction. •Durable and easy to clean up. 100% Manually Adjusted Nozzle Sets. •Ensures constant high... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Walther Pilot North America
Fully automatic spray gun for superb surface results. Internal control for opening and closing. Material volume regulation through notch-type fine adjustment. With pull bar for manual cleaning operation. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Designed for spraying heavy bodied fluids such as roof coatings, block fillers, and similar materials, the Model 7E2 has extra large fluid passages in a plated drop-forged brass head. It features adjustable floating needle valves and stainless steel air valve cartridges. It has a hardened steel four... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
HVLP/Pressure-Feed Guns [See More]
- Equipment Type: Component or Sub-system
- Features: PressureFeed
- Options / Components: Applicator / Gun
from Air Compressors Direct
Gravity Speed Spray Gun. •Lets fluid flow downward using less air. Specially Designed Air Caps & Large Air Passages. •Produces a wide spray pattern. •Causes excellent atomization for a faster work speed. 4.2 Ounce Capacity Cup. •Easy to clean. •Uses 9 CFM at 43 PSI;... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Walther Pilot North America
Fully automatic spray gun for perfect surface finish. Internal control for opening and closing the atomizing air. Standard version with pull-bar for manual cleaning operation. Material regulation via notch type fine adjustment. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Model 95 is a high production spray gun that can be used with most coatings. It provides superior performance and efficiency. The spray gun features all stainless steel fluid passages, 60 Series air and fluid nozzles, an extra wide trigger, large control knobs, and an ergonomic forged aluminum body. [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
HVLP/Siphon-Feed/Gravity-Feed Guns [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
from Walther Pilot North America
The automatic spray guns of the PILOT WA 800 series are fitted with an adapter plate. This allows the guns to be quickly exchanged for maintenance purposes. The front body is made entirely of stainless steel. The large material ducts allow for almost all types of material to be sprayed. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Name: Model 95G. Part Number: 6119. Gun Category: Conventional. Gun Type: Gravity Feed. Fluid Passages: Stainless Steel. Air Inlet: 1/4 NPS (m). Construction: Drop-Forged Aluminum. Cups: 1 Liter Aluminum Gravity Cup (54-4720). Colors: Black [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
Spray Systems Industrial Dry Filter Booths are designed to efficiently remove the overspray from the painting operation while maintaining uniform air flow throughout the work area. The disposable paint arrestor media is designed not to face load. The airborne paint particles are efficiently... [See More]
- Equipment Type: Component or Sub-system
- Air Flow: 10000.0
- Options / Components: Walk-in Room Type Booth
- Length: 90
from Walther Pilot North America
Automatic spray gun for a wide variety of spraying jobs. The font body is made of stainless steel. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Name: SV100 Siphon Feed. Part Number: 98-3161. Gun Category: Spray Vantage Pro Series. Gun Type: Manual. Fluid Passages: Aluminum. Fluid Inlets: 3/8" NPS(M). Air Inlet: 1/4" NPS(M). Weight: 1.17 lbs (532 g). Construction: Cast Aluminum. Market: Painter-Decorator-Contractor. Colors: Silver [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
Spray Systems Industrial Dry Filter Booths are designed to efficiently remove the overspray from the painting operation while maintaining uniform air flow throughout the work area. The disposable paint arrestor media is designed not to face load. The airborne paint particles are efficiently... [See More]
- Equipment Type: Component or Sub-system
- Air Flow: 9600.0
- Options / Components: Walk-in Room Type Booth
- Length: 90
from Walther Pilot North America
A high performance spray gun for a wide variety of spraying jobs. Features two material inlets permitting the use of gravity or syphon feed cups, material pressure tanks or pumps. Gun body TEFLON coated for ease of cleaning. Weight: 600 g. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Name: SV25 Gun w/Pressure Cup. Part Number: 7044-1500-1. Gun Category: Spray Vantage Pro Series. Gun Type: Manual. Max. Pressure: 40 PSI. Construction: Cast Aluminum. Market: Painter-Decorator-Contractor. Colors: Silver [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
The Spray Systems Modified Downdraft paint booth, in principle has airflow like the conventional downdraft booth. The air is forced through filters at the top of the booth, flows around the car and out through the plenums located along the sides of the booth. The Modified Downdraft booth does not... [See More]
- Equipment Type: Component or Sub-system
- Air Flow: 14000.0
- Options / Components: Walk-in Room Type Booth
from Walther Pilot North America
A lightweight spray gun made of high-grade plastic material. All wetted parts made of stainless steel. With air volume regulation. Wide choice of nozzles with only two air cap sizes. Weight: 290 g. Air Pressure Range: 0.7 to 1.5 bar. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Name: Airless 1M. Part Number: 44-6000. Gun Category: Conventional. Gun Type: Airless Manual. Fluid Passages: Stainless Steel. Fluid Inlets: 3/8" NPT (f) with a 9/16-18 JIC (m) adapter. Max. Pressure: 6000 PSI. Construction: Drop-Forged, Brass Plated. Colors: Silver [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Airless
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
Another traditional favorite, the Rear Flow booth filters all of the air for dust, dirt and lint. There are no door clearances or other open seams in the air path between the bank of intake filters and the exhaust fan. In the Rear Flow booth the double door automobile entrance is located at the same... [See More]
- Equipment Type: Component or Sub-system
- Air Flow: 12600.0
- Options / Components: Walk-in Room Type Booth
from Walther Pilot North America
Ergonomically designed high performance spray gun. Nozzle and needle made of stainless steel. All seals are solvent resistant. PTFE quick change packing, adjustable from the outside. Weight: 450 g. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
The PitBull 3500 PSI Airless spray gun has a revolutionary design that eliminates the needle and spring valve and is replaced by a single piece spray valve. Wear parts in the spray valve are made of Tungsten Carbide. Spray valve design reduces spitting, trigger pull, and fatigue while lasting up to... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Airless
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
The Spray Systems Semi Downdraft paint booth offers the business owner and painter the advantages of the down draft air flow without the expense of the pit area. In the Semi Downdraft Paint Booth fresh air is pulled through filters located at the top of the booth, down over the vehicle then swept... [See More]
- Equipment Type: Component or Sub-system
- Air Flow: 12600.0
- Options / Components: Walk-in Room Type Booth
from Walther Pilot North America
A high performance spray gun for industrial heavy duty applications. Front body is made of stainless steel. Weight: 760 g. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
The PitBull 7500 PSI Airless spray gun has a revolutionary design that eliminates the needle and spring valve and is replaced by a single piece spray valve. Wear parts in the spray valve are made of Tungsten Carbide. Spray valve design reduces spitting, trigger pull, and fatigue while lasting up to... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Airless
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Accessorie Air Compressor Systems
Spray Systems Twin lower is designed as a pressurized cross draft, which creates a positive booth atmosphere. By providing uniform air movement throughout the booth, an ultimate clean paint environment is achieved. The T-1000 requires an air replacement system and is great for high production shops... [See More]
- Equipment Type: Component or Sub-system
- Air Flow: 12600.0
- Options / Components: Walk-in Room Type Booth
from Walther Pilot North America
A low-pressure (HVLP) spray gun for a wide varitey of spraying jobs. Front body part is made of stainless steel. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
The unique Binks air assisted airless tip and air cap design is now available in a new manifold automatic gun platform. The two-piece design is ideally suited for multi-gun finishing equipment such as rotary machines, reciprocators, or fixed chain-on-edge systems located in high production... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air-assisted Airless
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun; Dust Collection or Air Filtration System
from Walther Pilot North America
A medium-pressure spray gun for a wide varitey of spraying jobs. Gun body is TEFLON coated for ease of cleaning. Weight: 600 g. Air Pressure Range: 0.7 to 1.5 bar. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Name: MAG UV. Part Number: 4003, 4004. Gun Category: HVLP. Gun Type: AA Airless Automatic. Fluid Passages: Stainless Steel. Fluid Inlets: 1/4" NPT (f). Max. Pressure: 100 PSI/6.8 Bar. Air Inlet: 1/4" NPT (f) Cylinder. Air Inlet: 1/8" NPT (f). Weight: 2.5 lbs./1.1 kg. Construction: Drop-Forged Steel. [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air-assisted Airless
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun; Dust Collection or Air Filtration System
from Walther Pilot North America
A lightweight spray gun made of high-grade plastic material. All wetted parts made of stainless steel. With air volume regulation. Wide choice of nozzles with only two air cap sizes. Weight: 290 g. Air Pressure Range: 0.7 to 1.5 bar. [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
from Carlisle
Name: Model 21. Part Number: 6220. Gun Category: Conventional. Gun Type: Automatic. Fluid Passages: Brass/Electroless nickel plated. Fluid Inlets: 3/8" NPS (m). Max. Pressure: 100 PSI/6.8 Bar. Air Inlet: 1/4" NPS (m). Cylinder Air Inlet: 1/4" NPS (m). Weight: 41 oz. Construction: Drop-Forged Steel. [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Carlisle
Name: Model 460. Part Number: 6401. Gun Category: Conventional. Gun Type: Automatic. Fluid Passages: Stainless Steel. Fluid Inlets: 1/4" NPS (m). Air Inlet: 1/4" NPS (m). Weight: 6 oz. Construction: Drop-Forged Aluminum. Colors: Silver [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Carlisle
Name: Model 603. Part Number: 6473. Gun Category: Conventional. Gun Type: Automatic. Fluid Inlets: 3/8" NPS (m). Max. Pressure: 100 PSI/6.8 Bar. Air Inlet: 1/4" NPS (m) Cylinder. Air Inlet: 1/4" NPS (m). Weight: 15 oz. Construction: Drop-Forged Aluminum. Colors: Graphite [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Carlisle
The Model 95A is a conventional spray gun that is pneumatically activated for applications with reciprocating, rotary, spindle machines and in stationary spray gun set ups. It is exceptionally rugged and is designed to stand up under hard, continuous use. 60 Series air and fluid nozzles are used in... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Carlisle
The Model 95AR is a conventional spray gun that is pneumatically activated for applications with reciprocating, rotary, spindle machines and in stationary spray gun set ups. It has the same features as the Model 95A spray gun, but has ratchet type adjustable needle valve control. Recommended for... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Carlisle
Name: Rhino Conventional. Part Number: 7039 - Order air cap separately. Gun Category: Conventional. Gun Type: Automatic. Fluid Passages: Stainless Steel. Fluid Inlets: 3/8" NPS (m). Max. Pressure: 120 PSI/8.3 Bar. Air Inlet: 1/4" NPS (m) Cylinder. Air Inlet: 1/4" NPS (m). Weight: 2.6 lbs/1.2 kg. [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Carlisle
Name: Model 550. Part Number: 6700. Gun Category: Conventional. Gun Type: Airless Automatic. Fluid Passages: Stainless Steel. Fluid Inlets: 1/4" NPS (m). Max. Pressure: 3000 PSI. Air Inlet: 1/4" NPS (m). Weight: 1.5 lbs. Construction: Drop-Forged Aluminum. Colors: Silver [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: Airless
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Carlisle
Incorporating some of the best features our award winning MACH 1 HVLP spray gun, the MACH 1A Automatic offers total control of atomizing air pressure, side port air, fluid flow, and spray patterns in production settings which require automatic equipment. These features give it an exceptionally high... [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: HVLP
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun
from Carlisle
Name: MAG HVLP. Part Number(s): 4006, 4007, 4008. Gun Category: HVLP. Gun Type: Automatic. Fluid Passages: Stainless Steel. Fluid Inlets: 1/4 ” NPT (F). Max. Pressure: 100 PSI/6.8 Bar. Atomizing Air Inlet: 1/4" NPS (M). Cylinder Air Inlet: 1/8" NPT (F). Fan Air Inlet: 1/4" NPS (M). [See More]
- Equipment Type: Component or Sub-system
- Spray Technology: HVLP
- Painting / Coating Process: Wet Spray
- Options / Components: Applicator / Gun; Dust Collection or Air Filtration System
from Carlisle
The Model 21M is a heavy duty, pneumatically operated gun for spraying all conventional coatings. It features a drop-forged, brass plated body and adjustable stainless steel fluid needle. It has an adjustable spray pattern control at the side of the gun head and offers a replaceable gasket fluid... [See More]
- Equipment Type: Component or Sub-system
- Options / Components: Applicator / Gun
- Painting / Coating Process: Wet Spray
- Automation / Control: Automatic