Desktop Wire, Cable, and Connector Tools
from Greenlee Textron, Inc.
Trust Greenlee as the industry standard for bending stubs, offsets, saddles, u-bends in EMT, IMC, PVC coasted and rigid conduit. For more than 140 years, Greenlee has been a provider of quality tools to the woodworking industry and, for over 70 years, to the electrical industry as well. Over 20... [See More]
- Form Factor: Desktop; Handheld
- Technology: Hydraulic Tool; Hand Tools
- Tool Type: Bender
from FKN Systek, Inc.
The CM 500W is a table top low cost crimp tool which takes a variety of dies. Air operated, using standard factory air (5 bar min), with a pressing capacity of up to 1200kp, this portable device allows easy and convenient change of tools and set up for different crimp contacts. Compare this to... [See More]
- Form Factor: Desktop
- Technology: Pneumatic Tool
- Tool Type: Crimper
from Eraser Company, Inc.
1256 Coaxial Cable Stripper. Item # RC1068. Eraser ’s Model 1256 Stripper is a bench model stripper that can be used to strip coaxial cables, including semi-rigid, heliax, plenum and RGU. Powered by an AC motor with a drilled out armature and foot switch activated, Model 1256 is easy to use,... [See More]
- Form Factor: Desktop
- Application / Connector Type: Coaxial; General Application
- Tool Type: Stripper
- Technology: Electrical
from Eraser Company, Inc.
Designed for portability and weighing only two pounds (910 grams), the Model 824 Portable Coaxial Cable Stripper is battery operated and can be used to strip coaxial cables, including RGU, semi-rigid, plenum, heliax and more. The 824 can also process semi-rigid cable up to.141 inches OD (3.5mm... [See More]
- Form Factor: Desktop
- Application / Connector Type: Coaxial
- Tool Type: Stripper
- Technology: Electrical
from Eraser Company, Inc.
Eraser's Model BTS1 Thermal Wire Stripper is a bench mounted thermal stripper for solid and stranded wire and cables up to 1/2" OD (12.7mm ø). The temperature of the stripping elements is infinitely variable up to 1400 °F (760 °C). The unit has an infinitely adjustable strip length... [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Stripper
- Technology: Electrical
from Eraser Company, Inc.
The Model C100S single blade centrifugal rotary wire stripper and twister will strip most insulations from solid and stranded wires, Teflon, P.T.F.E., PVC, nylon, KEL-F, and many more. Strip length and blade depth adjustments must be made while the machine is running. The C100S can be used to remove... [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Stripper
- Technology: Electrical
from Eraser Company, Inc.
Designed for production, Eraser's Model C200 Twin Blade Rotary Wire Stripper and Twister can process insulations such as Teflon, P.T.F.E., PVC, nylon, rubber, KEL-F and more from solid and stranded wires. The stripping head incorporates a pair of accurately adjustable tungsten carbide stripping... [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Stripper
- Technology: Electrical
from Eraser Company, Inc.
Designed for production, the Model C300 Twin Blade Rotary Wire Stripper and Twister will strip insulations from solid and stranded wires. The unit is capable of processing Teflon, P.T.F.E., PVC, nylon, rubber, KEL-F, miniature coax, coaxial cables, shielded wires and cables. The slug may be left on... [See More]
- Form Factor: Desktop
- Application / Connector Type: Coaxial
- Tool Type: Stripper
- Technology: Electrical
from Eraser Company, Inc.
The CCB100 is a hand held, battery operated cable cutter. With a squeeze of the trigger, this tool will easily cut through cables as large as 1000 kcmil soft drawn copper or aluminum or 750 kcmil hard drawn copper. The CCB100 has a 3 way switch (forward, reverse, and neutral) which allows the... [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Cutters / Scissors
- Technology: Electrical
from Eraser Company, Inc.
Eraser's Model CS800 Wire Cut & Strip is a fully programmable, fully electric bench top wire cutter and stripper. The unit can process wire from 10AWG - 30AWG and can quickly and precisely cut and partial strip 6,150 pieces per hour at 2.5" lengths (63.5 mm ø), and 5,700 pieces per hour... [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Stripper; Cutters / Scissors
- Technology: Electrical
from Eraser Company, Inc.
The D series wheel strippers cover many applications for stripping magnet, enamel and film insulated wires. Round, rectangular and square section wires with insulations such as Formvar, ML, Dayglass, Isonel, Polythermaleze and many more can be stripped. Fybrglass or wire brush wheels may be utilized... [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Stripper
- Technology: Electrical
from Eraser Company, Inc.
The D series wheel strippers cover many applications for stripping magnet, enamel and film insulated wires. Round, rectangular and square section wires with insulations such as Formvar, ML, Dayglass, Isonel, Polythermaleze and many more can be stripped. Fybrglass or wire brush wheels may be utilized... [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Stripper
- Technology: Electrical
from Eraser Company, Inc.
The DCF 2/3 stripper with drilled armature will strip round magnet and enamel wires with any type of film insulation, including Formvar, nylon, polythermaleze and varnish The variable speed power unit controls the speed. Insulation is cleanly removed but the wire conductor is not damaged. This tool... [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Stripper
- Technology: Electrical
from Eraser Company, Inc.
The DCFH is a versatile wire twister for producing twisted pairs by twisting a looped wire. The speed is variable using the control on the power unit. [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Wire / Cable Twister
- Technology: Electrical
from Eraser Company, Inc.
The DCFR uses a rotating carbide rasp head to strip square, rectangular, or flat magnet or enamel wire insulations including glass, varnish, epoxy and polythermaleze. The variable speed power unit controls the speed. Insulation is cleanly removed but the wire conductor is not damaged. This tool is... [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Stripper
- Technology: Electrical
from Eraser Company, Inc.
Portable wire twister model DCFT is used for neatly twisting together the ends of pre-stripped stranded wires. [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Wire / Cable Twister
- Technology: Electrical
from Eraser Company, Inc.
The DSP stripping pots are designed specifically for use with Dip Strip. The DSP3 has an advanced feedback temperature controller and has a 600 watt heating element to increase the throughput 10 times. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires... [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Stripper; Stripping Pot
- Technology: Electrical; Chemical Removal
from Eraser Company, Inc.
The D series wheel strippers cover many applications for stripping magnet, enamel and film insulated wires. Round, rectangular and square section wires with insulations such as Formvar, ML, Dayglass, Isonel, Polythermaleze and many more can be stripped. Fybrglass or wire brush wheels may be utilized... [See More]
- Form Factor: Desktop
- Application / Connector Type: General Application
- Tool Type: Stripper
- Technology: Electrical