SAW Filter Board Mount RF Filters
from Qorvo
1842.5 MHz RF SAW Filter - Band 3 Downlink [See More]
- Filter Design: Saw Filter
- Filter Type: Bandpass
- Filter Technology: Passive Filter
- Fc: 1842
from Qorvo
QPB9029 is an L-Band switched filter bank module. The device integrates two switches, one on each side of the 4 filters and bypass. Using Qorvo ’s TC-SAW filter technology, the device provides excellent band filtering capability. This module is housed in a compact 6 x 6 mm package for L-Band... [See More]
- Filter Design: Saw Filter
- Filter Type: Bandpass
- Filter Technology: Passive Filter
- Fc: 1200 to 1400
from Qorvo
The QPQ1060 is a L1 GPS Band Pass Filter in a compact size for use in any GPS application. Designed for rejection of unwanted GPS signals, this SAW filter also has excellent power handling capability for low power transmitters. Housed in a 1.4 x 1.2 mm laminate with over mold package, this device... [See More]
- Filter Design: Saw Filter
- Fc: 1560 to 1591
- Filter Technology: Passive Filter
- Bandwidth: 31000
from Qorvo
The QPQ1063 is a L1/L2 GPS diplexer in a compact size for use in any GPS application. Designed for rejection of unwanted GPS signals, this SAW diplexer also has excellent power handling capability for low power transmitters. Housed in a 5 x 5 mm laminate with over mold package, this device allows... [See More]
- Filter Design: Saw Filter
- Fc: 1212 to 1591
- Filter Technology: Passive Filter
- Bandwidth: 21000
from Qorvo
The QPQ1061 is a L2 GPS Band Pass Filter in a compact size for use in any GPS application. Designed for rejection of unwanted GPS signals, this SAW filter also has excellent power handling capability for low power transmitters. Housed in a 1.4 x 1.2 mm laminate with over mold package, this device... [See More]
- Filter Design: Saw Filter
- Fc: 1212 to 1243
- Filter Technology: Passive Filter
- Bandwidth: 31000
from Qorvo
The QPQ1062 is a L5 GPS Band Pass Filter in a compact size for use in any GPS application. Designed for rejection of unwanted GPS signals, this SAW filter also has excellent power handling capability for low power transmitters. Housed in a 1.4 x 1.2 mm laminate with over mold package, this device... [See More]
- Filter Design: Saw Filter
- Fc: 1161 to 1192
- Filter Technology: Passive Filter
- Bandwidth: 31000
from Broadcom Inc.
The Avago ACPF-7024 is one of a pair of highly selective bandpass filters that enable cellular phones to offer simultaneous operation of next generation 4G WiMAX/LTE voice communications and WiFi/Bluetooth data networks without compromising either voice or data quality of service. The ACPF-7024... [See More]
- Filter Design: Saw Filter
- Filter Type: Bandpass
- Filter Technology: Passive Filter
- Fc: 2442
from Broadcom Inc.
The Avago ACPF-7005 is a miniaturized Bandpass Filter designed for use in handsets and mobile data terminals operating in the PCS (Blocks A-G)/UMTS Band 2 Tx frequency range (1850.6 – 1914.4 MHz). [See More]
- Filter Design: Saw Filter
- Filter Type: Bandpass
- Filter Technology: Active Filter
- Fc: 1851