PVC Ball Valves
from Plast-O-Matic Valves, Inc.
Actuated & Manual Ball Valves feature trunnion safety design and dual sliding seats for ultra-smooth operation and repeatable bubble-tight shutoff with an incredibly long cycle life. Available 2-way and 3-way, in 3/8 ″ – 4 ″ sizes. Actuated & Manual Butterfly Valves, 2... [See More]
- Material: PVC; CPVC (optional feature)
- Number of Ports: 3
- Valve Size: 0.50 to 1.50
- Flow (Cv): 4.00 to 39.00
from Asahi/America, Inc.
The AVBVX allows for a simple transition between rigid PVC pipe and flexible PFA tubing integrated into Asahi/America ’s Type-21 manual ball valve. PFA x PFA versions are also available. [See More]
-
Material:
PVC, CPVC, PP, PVDF
; PVC; PP; PVDF
-
Connection Description: Threaded;
Socket, Threaded, Flanged, series Flowell 60
series, Super Type Pillar fitting, Super 300 Type Pillar fitting , Flare Type, Hose nipple
from RS Components, Ltd.
Georg Fischer 161546062 Ball Valve [See More]
- Material: Pvc-u; PVC
- Connection Description: Solvent cement socket
- Maximum Pressure: 232.06
from Assured Automation
Description: The PTP Series 3-Way Ball Valves can be used for flow diverting, mixing, or on/off isolation. They will replace a Tee + 2 valve linkage assembly at reduced cost and space, along with shorter installation and maintenance time. The patented seat stop carrier allows for in-line... [See More]
- Material: PVC
- Maximum Pressure: 232.00
- Valve Size: 0.50 to 2.00
- Number of Ports: 3
from Bonomi North America, Inc.
0.5" 2-Way, PVC Ball Valve & 12VDC Plastic On/Off Electric Actuator [See More]
- Material: Aluminum; Brass / Bronze; PVC
- Maximum Pressure: 600.00
- Valve Size: 0.50
- Number of Ports: 2
from Plast-O-Matic Valves, Inc.
Three-way version offers the same trunnion design, dual sliding seats and other premium features found in our 2-way valves. 1/2 ″ – 2 ″ sizes in PVC or CPVC, with 2-hole ball to prevent mixing, or 3-hole ball to prevent momentary deadhead. 3 ″ & 4 ″ sizes in PVC,... [See More]
- Material: PVC; CPVC (optional feature)
- Number of Ports: 3
- Valve Size: 0.50 to 2.00
- Flow (Cv): 4.00 to 39.00
from Asahi/America, Inc.
The Asahi/America ball check valve employs a free moving ball, which unseats to permit flow in one direction, but seals against a seat to prevent backflow. It may be installed vertically or horizontally. Also available as foot valve for suction side of pump. [See More]
-
Material:
PVC, CPVC, PP and PVDF
; PVC; PP; PVDF - Actuation: Manual
- Valve Size: 0.50 to 4.00
from RS Components, Ltd.
Georg Fischer 161546063 Ball Valve [See More]
- Material: Pvc-u; PVC
- Connection Description: Solvent cement socket
- Maximum Pressure: 232.06
from Bonomi North America, Inc.
0.5" 2-Way, PVC Ball Valve & Double Acting Pneumatic Actuator [See More]
- Material: Aluminum; Brass / Bronze; PVC
- Maximum Pressure: 600.00
- Valve Size: 0.50
- Number of Ports: 2
from Plast-O-Matic Valves, Inc.
Valve body, stem, ball, seat carrier, union nuts and connections are choice of PVC or CPVC. Seats are PTFE; o-rings are choice of EPDM or FKM (Viton).Actuator body is aluminum alloy (ASTM 6063-T6 and ASTM B179) with additional components constructed of nickel plated steel, stainless steel, spring... [See More]
- Material: PVC; CPVC
- Number of Ports: 2
- Valve Size: 0.50 to 4.00
- Connection Description: Union
from Asahi/America, Inc.
The GP-V general purpose plastic manual ball valve is engineered for use in water applications like pools and water parks and light chemical service duty. It has a maximum operating pressure of 150psi. It can not be actuated and should not be used in aggressive chemical and demanding industrial... [See More]
-
Material:
PVC
; PVC - Maximum Pressure: 150.00
- Valve Size: 0.50 to 4.00
-
Connection Description: Threaded;
Combination (Socket and Threaded)
from RS Components, Ltd.
Georg Fischer 161546065 Ball Valve [See More]
- Material: Pvc-u; PVC
- Connection Description: Solvent cement socket
- Maximum Pressure: 232.06
from Bonomi North America, Inc.
0.5" L-Ported 2-Way, PVC Ball Valve & 12VDC Plastic On/Off Electric Actuator [See More]
- Material: Aluminum; Brass / Bronze; PVC
- Maximum Pressure: 600.00
- Valve Size: 0.50
- Number of Ports: 2
from Plast-O-Matic Valves, Inc.
High performance brushless actuator motor with overload/overheat protection.Valve body and piping connections are available in PVC or CPVC, with EPDM or Viton seals. Actuator housing is constructed of ABS and is IP67 rated. ISO drive and mounting unit are aluminum.Mounting fasteners are stainless... [See More]
- Material: PVC; CPVC
- Number of Ports: 2
- Valve Size: 0.75 to 4.00
- Connection Description: Union
from Asahi/America, Inc.
This is a quarter-turn plastic (PVC) manual ball valve. It has many process control monitoring and fluid sampling uses in the laboratory. These are quarter-inch valves, which come in seven configurations. They may be used for simple on/off service or for calibrating flow. 1/4" PVC/EPDM [See More]
-
Material:
PVC
; PVC - Actuation: Manual
- Valve Size: 0.25
from RS Components, Ltd.
Georg Fischer 161546242 Ball Valve [See More]
- Material: Pvc-u; PVC
- Connection Description: Solvent cement socket
- Maximum Pressure: 232.06
from Bonomi North America, Inc.
0.5" L-Ported 2-Way, PVC Ball Valve & Double Acting Pneumatic Actuator [See More]
- Material: Aluminum; Brass / Bronze; PVC
- Maximum Pressure: 600.00
- Valve Size: 0.50
- Number of Ports: 2
from Plast-O-Matic Valves, Inc.
Plast-O-Matic Trunnion Ball Valves are available with an adapter and tee for substantially stronger and more compact valve connections to lateral piping. This design eliminates the need for a reducer, additional length of pipe, and one of the end connections on the ball valve. Simplifies connections... [See More]
- Material: PVC; CPVC (optional feature); PP (optional feature); PVDF (optional feature)
- Number of Ports: 2
- Valve Size: 0.50 to 1.25
- Connection Description: Threaded (optional feature); BoltFlange (optional feature); Socket Weld (optional feature)
from Asahi/America, Inc.
The Omni ® Type-27 plastic manual valves are economical, one-piece valves that cannot be taken apart. Omni ® plastic manual ball valves are molded body design quarter turn valves with hyperbolic flow characteristics, low pressure drops and reliable sealing. They offer relatively poor flow... [See More]
-
Material:
PVC, CPVC
; PVC - Actuation: Manual
- Valve Size: 0.38 to 2.00
from RS Components, Ltd.
Georg Fischer 161546243 Ball Valve [See More]
- Material: Pvc-u; PVC
- Connection Description: Solvent cement socket
- Maximum Pressure: 232.06
from Plast-O-Matic Valves, Inc.
The original Engineered Ball Valve features trunnion design, dual sliding seats, blowout proof stem, mounting lugs. 3/8 ″ to 4 ″ sizes in PVC, CPVC, Natural Polypro, PVDF with FKM or EPDM. Available with NPT, socket, BSP, Sanitary, and other connection types. [See More]
- Material: PVC
- Number of Ports: 2
- Valve Size: 0.50 to 4.00
- Flow (Cv): 10.00 to 768.00
from Asahi/America, Inc.
PVC body. EPDM or FKM seals. True union design. Equal percentage flow characteristics. Precision machined flow control ball and seat design. SST - Seat Support Technology. Degreed indicator plate (manual type). Indicator line on handle (manual type). Flow direction arrow label. Handle doubles as... [See More]
-
Material:
PVC
; PVC - Actuation: Manual
- Valve Size: 0.50 to 2.00
from RS Components, Ltd.
Georg Fischer 161546244 Ball Valve [See More]
- Material: Pvc-u; PVC
- Connection Description: Solvent cement socket
- Maximum Pressure: 232.06
from Plast-O-Matic Valves, Inc.
Valve body, stem, ball, seat carrier, union nuts and connections are choice of PVC, CPVC, beige polypro, or PVDF. Seats are PTFE; O-rings are choice of EPDM or FKM. Handle is molded of ABS. Maximum test pressure under laboratory conditions at 75°F is 235 PSI on 1/2" through 2" sizes, 150 PSI on 3"... [See More]
- Material: PVC; CPVC; PVDF
- Number of Ports: 2
- Valve Size: 0.50 to 4.00
- Connection Description: Union
from Asahi/America, Inc.
Type-23 Multiport ® plastic ball valves are three way ball valves with true union design. The use of a multiport ball valve simplifies piping and eliminates the need for an additional valve and tee fitting. A “L ” ported ball valve permits flow from the bottom entry to either the... [See More]
-
Material:
PVC, CPVC, PP, PVDF
; PVC; PP; PVDF -
Connection Description: Threaded;
Socket, Threaded, Butt (Spigot) DIN Socket, IPS Socket, Flanged
*6” end connections available for 4" valve bodies
- Valve Size: 0.50 to 4.00
- Actuation: Manual
from RS Components, Ltd.
Georg Fischer 161546245 Ball Valve [See More]
- Material: Pvc-u; PVC
- Connection Description: Solvent cement socket
- Maximum Pressure: 232.06
from Plast-O-Matic Valves, Inc.
Valve body, stem, ball, seat carrier, union nuts & connections are choice of PVC, CPVC, polypro, or PVDF. Seats are PTFE; o-rings are choice of EPDM or FKM. Handle is molded of ABS. Mounting threads (non-wetted) are brass and 304 stainless steel. Maximum test pressure under laboratory conditions at... [See More]
- Material: PVC; CPVC; PVDF
- Number of Ports: 2
- Valve Size: 0.50 to 4.00
- Connection Description: Union
from Asahi/America, Inc.
ALL Fast Packs ship within 24 hours from time the order is placed!*. *Note: Fast Pack delivery times may vary based on availability and inventory. Every effort will be made to meet our 24-hour shipping goal. Fast Pack items ordered with other Asahi/America products may affect delivery. The Type-21... [See More]
-
Material:
PVC
; PVC; Nylon -
Connection Description: Threaded;
½" NPT
- Valve Size: 0.50 to 4.00
from RS Components, Ltd.
Georg Fischer 161546246 Ball Valve [See More]
- Material: Pvc-u; PVC
- Connection Description: Solvent cement socket
- Maximum Pressure: 232.06
from Asahi/America, Inc.
ALL Fast Packs ship within 24 hours from time the order is placed!*. *Note: Fast Pack delivery times may vary based on availability and inventory. Every effort will be made to meet our 24-hour shipping goal. Fast Pack items ordered with other Asahi/America products may affect delivery. The Type-21... [See More]
-
Material:
PVC
; PVC; Nylon -
Connection Description: Threaded;
¼" NPT
- Valve Size: 0.50 to 4.00
from RS Components, Ltd.
Georg Fischer 161546247 Ball Valve [See More]
- Material: Pvc-u; PVC
- Connection Description: Solvent cement socket
- Maximum Pressure: 232.06
from Asahi/America, Inc.
Plastic Manual Ball Valves. Type-21/21a ball valves are corrosion resistant plastic manual true union design quarter turn valves with hyperbolic flow characteristics, low pressure drops and reliable sealing. They are typically used in on/off applications and are offer relatively poor flow control. [See More]
-
Material:
PVC, CPVC, PP, and PVDF
; PVC; PP; PVDF
- Valve Size: 0.50 to 4.00
from RS Components, Ltd.
Georg Fischer 161546061 Ball Valve [See More]
- Material: Pvc-u; PVC
- Connection Description: Threaded; Solvent cement socket
- Maximum Pressure: 232.06
from Flomatic Valves
208T/S - Corrosion resistant PVC body. Threaded female x female connection. NITRILE (Buna-N) self-cleaning ball. E-Z access port with NITRILE (Buna-N) seal. Also available with socket weld –change part number from “T ” to “S ” –same pricing. For reference use... [See More]
- Material: PVC
- Maximum Pressure: 100.00
- Valve Size: 1.25 to 2.00
- Media Temperature: 150
from NIBCO INC.
PVC Schedule 40 ball valves are used in cold water pressure distribution systems. Choose socket or threaded end connections. Maximum service temperature 140 °F, Do not test or use with compressed air or other gases. ASTM D2466, ASTM D1784, cell Class 12454, NSF/ANSI Standard 61, UL Listed 94V-0,... [See More]
- Material: Schedule 40; PVC
- Number of Ports: 2
- Valve Size: 0.50 to 4.00
- Media Temperature: 140
from Mid-America Fittings, Inc.
Choice of outside diameter size [See More]
- Material: Brass / Bronze; PVC
- Number of Ports: 2
- Valve Size: 0.50 to 4.00
- Connection Description: Threaded; 1/2" - 4" Female Pipe
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. is committed to providing quality, custom solutions which meet our customers ’ unique needs. We provide a highly valued experience for our customers and employees by making all our business partnerships enjoyable, professional and profitable. [See More]
- Material: PVC
- Maximum Pressure: 125.00
- Valve Size: 0.50 to 0.75
- Number of Ports: 3
from Cole-Parmer
• True union ball valve with added safety and functionality for a diverse range of applications. • PTFE ball seat with high abrasion resistance. • Built-in tool for easy adjustment of ball torque. • Threaded mounting inserts for fixed-point attachment [See More]
- Material: PVC
- Flow (Cv): 5.00
- Maximum Pressure: 232.00
from Dura Plastic Products, Inc.
Valves:Compact Ball Valve - Gray:Soc x Soc [See More]
- Material: PVC
- Valve Size: 0.50
from GF Piping Systems
A broad spectrum of product features provides you with quality, flexibility, and reliability, in addition to modularity. GF Piping Systems has 40 years experience in plastic valves. GF Piping Systems offers 3-way diverter valves, metering valves as well as basic plastic ball valves to meet all your... [See More]
- Material: ABS; PVC; CPVC; PVDF
- Maximum Pressure: 232.00
- Valve Size: 0.38 to 6.00
- Number of Ports: 2 to 3
from Princess Auto Limited
1/2 in. PVC Ball Valve [See More]
- Material: PVC
- Valve Size: 0.50
from Clark Solutions
All model 83 open/close electrically actuated ball valves sizes 3/8" thru 2" have direct mounted unidirectional 90 º turn actuators (115 Vac & 220 Vac, 12/24 AC & DC are reversing). The actuators are weatherproof (NEMA 4X), have a green lead for grounding, and all wire leads protrude... [See More]
- Material: PVC; CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.38 to 2.00
- Number of Ports: 2
from U.S. Plastic Corporation
Designed for swimming pool, pond, irrigation, and other water applications with low concentrations of chlorine or other additives. Lightweight, thermoplastic design resists process and atmospheric corrosion. Pressure rating 150 psi for 1-1/2 - 3", 100 PSI for 4" (non-shock water at 73 F). Blue ABS... [See More]
- Material: PVC
- Connection Description: Threaded; Union; Socket Weld
- Valve Size: 1.50
from Hayward Flow Control
HCTB Series ready for actuation ball valves are the TB Series without a handle or a mounting kit. In other words, these valves are ready for actuation. If an actuator is ordered with the valve, the mounting kit is included at no charge. The mounting kit is determined by the choice or type of... [See More]
- Material: PVC; CPVC
- Number of Ports: 2
- Valve Size: 0.50 to 6.00
- Connection Description: Socket Weld
from Victaulic Co. of America
Available with a lever handle or a square nut. Sizes from 2 -- 6 ″ | 50 -- 150 mm. Pressures up to 100 psi | 690 kPa | 7 bar [See More]
- Material: PVC
- Maximum Pressure: 100.00
- Valve Size: 2.00 to 6.00
- Connection Description: Grooved Ends
from BI-TORQ® Valve Automation
Full port PVC automated true union 3-way ball valves. 1/2" through 2". EPDM and Viton seal options with TFE seats. Ideal for use in chemical, industrial, irrigation, mixing, or pool and spa applications. Socket or threaded ends [See More]
- Material: PVC
- Maximum Pressure: 235.00
- Valve Size: 0.50 to 2.00
- Number of Ports: 3
from Flomatic Valves
77- Auto-Vac ® Vacuum Breaker - This 1" valve is available in stainless steel and PVC. All internal parts are engineered composite, with a stainless steel disc and resilient seat. Used to prevent water hammer in wastewater valves. For reference use only. Please check Flomatic's website for the... [See More]
- Material: Stainless Steel; PVC
- Maximum Pressure: 400.00
- Valve Size: 1.00
- Media Temperature: 180
from NIBCO INC.
PVC Schedule 80 Valves for use with hot corrosive liquids, chemical processing, industrial plating, chilled water service, deionized water lines, vacuum service, and waste treatment systems. Valve pressure rating 250 psi at 73 °F water non-shock, Full port, Maximum service temperature 140... [See More]
- Material: PVC
- Maximum Pressure: 250.00
- Valve Size: 0.50 to 10.00
- Number of Ports: 2 to 3
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from Dura Plastic Products, Inc.
Valves:Compact Ball Valve - Gray:Thread x Thread [See More]
- Material: PVC
- Valve Size: 0.50
from GF Piping Systems
Ball Valves: Available in PVC and CPVC, the type 104 ball valve from Georg Fischer offers an economic solution for less demanding applications. The type 104 is based on the same industrial ball valve Georg Fischer uses in other applications. This means the valve is true union and can be repaired if... [See More]
- Material: ABS; PVC; CPVC; PP; PVDF
- Maximum Pressure: 150.00 to 232.00
- Valve Size: 0.38 to 12.00
- Number of Ports: 2 to 3
from U.S. Plastic Corporation
Designed for swimming pool, pond, irrigation, and other water applications with low concentrations of chlorine or other additives. Lightweight, thermoplastic design resists process and atmospheric corrosion. Pressure rating 150 psi for 1-1/2 - 3", 100 PSI for 4" (non-shock water at 73 F). Blue ABS... [See More]
- Material: PVC
- Connection Description: Threaded; Union; Socket Weld
- Valve Size: 2.50
from Hayward Flow Control
EATB Series is a package unit of an EA actuator and a TB Series ball valve. The EA actuator is a 115 VAC full featured electric actuator with a TB Series PVC ball valve EPDM o-rings. Socket and threaded end connections come with the valve. [See More]
- Material: PVC
- Maximum Pressure: 250.00
- Valve Size: 0.50 to 2.00
- Number of Ports: 2
from BI-TORQ® Valve Automation
Features. PVC, CPVC, PVDF or Polypropylene body construction. 1/2" through 2". TFE seats and EPDM, Viton o-ring seals. Threaded, socket or flanged end options. Patented design to help prevent leakage in case of stem damage. ISO 5211 mounting saddles for easy actuation retrofit [See More]
- Material: PVC
- Maximum Pressure: 235.00
- Valve Size: 0.50 to 2.00
- Number of Ports: 3
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from Dura Plastic Products, Inc.
Valves:Compact Ball Valve:CTS x CTS [See More]
- Material: PVC
- Valve Size: 0.50
from GF Piping Systems
Ball Valves: The Type 230 Series Pneumatically Actuated Ball Valve from Georg Fischer is the ultimate choice for the high demands of the industrial world. It is available in PVC, CPVC, PP-H, and PVDF material. The valve can be configured for throttling or for simple open/close functionality. The... [See More]
- Material: ABS; PVC; CPVC; PP; PVDF
- Maximum Pressure: 150.00 to 232.00
- Valve Size: 0.38 to 12.00
- Number of Ports: 2 to 3
from U.S. Plastic Corporation
Single Union Ball Valves are an economically priced solution for irrigation, water treatment, pool/spa, and commercial plumbing applications. Thermoplastic design eliminates process and atmospheric corrosion. Pressure rated up to 150 psi, non-shock water at 73 F. Socket dimensions conform to ASTM D-... [See More]
- Material: PVC
- Connection Description: Union
- Valve Size: 2.00
from Hayward Flow Control
EAUTB Series is a package unit of an EAU actuator and a TB Series ball valve. The EAU actuator comes prewired with a terminal strip, and one auxiliary limit switch. Also includes a TB Series ball valve in PVC with FPM or EPDM o-rings. Socket and threaded end connections come with the valve. Features... [See More]
- Material: PVC
- Maximum Pressure: 235.00
- Valve Size: 0.50 to 2.00
- Number of Ports: 2
from BI-TORQ® Valve Automation
Full port PVC and CPVC automated true union ball valves. 1/2" through 4". EPDM, Viton seal options with TFE seats. Ideal for use in chemical, industrial, irrigation, or pool and spa applications. Socket, threaded or flanged ends [See More]
- Material: PVC; CPVC (optional feature)
- Maximum Pressure: 150.00 to 235.00
- Valve Size: 0.50 to 4.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from Dura Plastic Products, Inc.
Valves:Safety Block Single Union Ball Valve:Soc x Soc [See More]
- Material: PVC
- Valve Size: 0.50
from U.S. Plastic Corporation
Ball valves perform a quarter turn on/off or modulating function. A flow-controlling ball located within the body of the valve contains a hole through its center along one axis, which connects the inlet and outlet ports of the body. The ball itself is held in place by, and rotates 90 within, PTFE... [See More]
- Material: PVC
- Connection Description: Union
- Valve Size: 0.50
from Hayward Flow Control
PMDTB Series is a package unit of a PMD pneumatic actuator and a TB Series ball valve. The PMD actuator is double acting air-to-air operation with a solenoid valve packaged with a TB Series ball valve in PVC or Corzan CPVC. FPM or EPDM o-rings are available and the valve comes with socket and... [See More]
- Material: Corzan; PVC; CPVC
- Number of Ports: 2
- Valve Size: 0.50 to 2.00
- Connection Description: Threaded; Socket Weld
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from Dura Plastic Products, Inc.
Valves:Safety Block Single Union Ball Valve:Thread x Thread [See More]
- Material: PVC
- Valve Size: 0.50
from U.S. Plastic Corporation
Industrial Series PVC & Corzan CPVC Schedule 80. CEPEX Industrial series antiblock full port true union ball valve with PTFE seats and EPDM or Viton O-Rings. 1/2" - 2" rated @ 240 PSI and supplied with Socket/Threaded Combo End Connectors. 2-1/2" - 4" rated @ 150 PSI and supplied with either... [See More]
- Material: PVC
- Connection Description: Union
- Valve Size: 0.50
from Hayward Flow Control
The IV Series Injection Valves and IQ Series Injection Quills facilitate injection of chemicals away from pipe or tank inner walls, ensuring rapid mixing and preventing corrosion. Each design includes a built-in ball check valve with Hastelloy CTM spring to prevent back-flow of the process liquid... [See More]
- Material: FPM or EPDM O-Ring Seals; PVC; CPVC; PVDF
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 1.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from Dura Plastic Products, Inc.
Valves:Safety Block True Union Ball Valve:Soc/Thread [See More]
- Material: PVC
- Valve Size: 0.50
from U.S. Plastic Corporation
Valves are premium quality and ideally suited for the most demanding industrial, commercial, agricultural and turf irrigation environments. Patented PVDF polymeric locking strip allows safe operation even when installed in the reverse direction. It also allows for ease of disassembly, should the... [See More]
- Material: PVC
- Connection Description: Threaded; Union; Socket Weld
- Valve Size: 0.50
from Hayward Flow Control
LA Series lateral 3-way ball valves are available in PVC and Corzan CPVC. O-rings are FPM or EPDM and seats are PTFE. Up to 2 in. sizes have socket and threaded end connections. All valves are assembled with silicone free lubricant. Features. PVC and Corzan CPVC. Simplifies Lateral Connections. [See More]
- Material: Corzan; PVC; CPVC; PP
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 6.00
- Number of Ports: 3
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
from Dura Plastic Products, Inc.
Valves:Safety Block True Union Ball Valve:Viton Soc/Thread [See More]
- Material: PVC
- Valve Size: 1.00
from U.S. Plastic Corporation
The Type 523 metering ball valve is ideal solution where precise flow control is needed. It has a special V-notch ball and operates with a 180 turn versus a 90 turn most ball valves have. The Type 523 has an integrated scale to indicate degrees of opening and provides a very linear flow curve. [See More]
- Material: PVC
- Valve Size: 0.38
from Hayward Flow Control
TW Series 3-Way ball valves are available in PVC and Corzan CPVC. O-rings are either FPM or EPDM and the seats are PTFE. Up to 2 in. sizes have socket and threaded end connections. All TW Series valves are assembled with silicone free lubricant. Features. PVC and Corzan CPVC. Position Indicator. [See More]
- Material: Corzan; PVC; CPVC; PP
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 6.00
- Number of Ports: 3
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from Dura Plastic Products, Inc.
Valves:Single Union Ball Valve Pool & Spa:Fipt x Mipt [See More]
- Material: PVC
- Valve Size: 1.50
from U.S. Plastic Corporation
Full port with FPM Seals, PTFE Seats, 150 psi rated. Used for shut-off for downstream repair. Snap fit handle - never falls off. All plastic construction. Has many applications: Chemical processing, plating, photo processing, laboratories, water conditioning, electronic production, food, and brine. [See More]
- Material: PVC
- Connection Description: Union; Socket Weld
- Valve Size: 2.50
from Hayward Flow Control
QIC2 ™ compact ball valves are offered in PVC only and come with EPDM o-rings only. All seats are PTFE and all valves are assembled with silicone free lubricant. Features. Gray PVC. Rugged, Compact and Lightweight Design. Full Port Design. PTFE Seats. EPDM O-Ring Seals. Low Torque, Easy 1/4... [See More]
- Material: PVC
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 2.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from Dura Plastic Products, Inc.
Valves:Single Union Ball Valve Pool & Spa:Soc x Soc [See More]
- Material: PVC
- Valve Size: 1.50
from U.S. Plastic Corporation
Manual, 2-way, full port ball valve provides long working life and maintenance-free performance. True union permits radial installation or removal. Access to all components (ball, stem, seats and seals) is provided by removal of the left hand threaded seat carrier. The ergonomic handle has a... [See More]
- Material: PVC
- Connection Description: Threaded; Union; Socket Weld
- Valve Size: 0.38
from Hayward Flow Control
QTA Series compact ball valves are available in gray or white PVC. O-rings are EPDM and seats are Santoprene ® (TPV) only. All QTA Series have socket and threaded end connections. Features. Gray and White PVC. Compact and Lightweight Design. Rated at Full 150 PSI. Easy 1/4-Turn Operation. [See More]
- Material: PVC; PP
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 4.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 2.00
- Maximum Pressure: 125.00
from Dura Plastic Products, Inc.
Valves:Single Union Ball Valve Pool & Spa:Thread x Thread [See More]
- Material: PVC
- Valve Size: 1.50
from U.S. Plastic Corporation
Hayward EAU series automated true union ball valves are PVC with either FPM or EPDM seals and PTFE seats. They have a full port design, are fully serviceable and have double O-ring stem seals. They are NSF/ANSI 61 listed. Actuators feature a UL/CSA listed motor, a thermoplastic NEMA 4/4X enclosure,... [See More]
- Material: PVC
- Connection Description: Union
- Valve Size: 0.50
- Actuation: Electric
from Hayward Flow Control
QVC Series compact ball valves are available in white and gray PVC and have EPDM o-rings and Santoprene ® (TPV) seats. End connections are socket or threaded and available in bag quantities only. Features. Gray and White PVC. Compact and Lightweight Design. Rated at Full 150 PSI. Easy 1/4-Turn... [See More]
- Material: PVC; PP
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 4.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
Valves provide quick quarter turn shut-off and eliminate the need for unions. Allows for easy valve body removal from a piping system without disturbing pipe connections. Seal retainer incorporates a fine pitch thread for accurate seat adjustment. Reversible PTFE seats,should they become worn or... [See More]
- Material: PVC
- Connection Description: Threaded; Union; Socket Weld
- Valve Size: 0.50
from Hayward Flow Control
CV Series Profile2 ™ ball valves are available in PVC and Corzan CPVC.O-rings are either FPM or EPDM and the seats are PTFE. Up to 2 in. sizes are packed standard with socket & threaded end connections. The proportional control provides two linear flow curves, one for fast opening,and one... [See More]
- Material: Corzan; PVC; CPVC; PP
- Maximum Pressure: 250.00
- Valve Size: 1.00 to 6.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 2.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
Valve features an ultra-compact double block design, and full port bi-directional operation. The true union design allows the valve to be easily removed from the piping system and fully serviced. A threaded seat stop carrier provides improved seal integrity under tough service conditions while the... [See More]
- Material: PVC
- Connection Description: Union
- Valve Size: 0.50
from Hayward Flow Control
TBB Series true union ball valves are offered in PVC, Corzan CPVC, PP and PVDF. O-rings are FPM or EPDM. Up to 2 in. sizes have socket and threaded end connections. All seats are PTFE. Features. PVC, CPVC, PP and PVDF. Full Port Design. Easy Maintenance. FPM or EPDM Seals. Easily Automated. Double... [See More]
- Material: Corzan; PVC; CPVC; PP; PVDF
- Maximum Pressure: 225.00
- Valve Size: 0.50 to 4.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
Lock and meter ring enables the ball valve to be positioned in several different locking modes, while providing an additional safety feature against unintentional valve activation. Enables locking against unauthorized operation. Compact construction. Low operating forces. Light weight. Temp. ranges:... [See More]
- Material: PVC
- Valve Size: 0.25
from Hayward Flow Control
TBZ Series (Z-Ball) true union ball valves have a drilled ball to vent gases for sodium hypochlorite service. They are offered in PVC or Corzan CPVC with FPM o-rings only. Seats are PTFE. Up to 2 in. sizes have socket and threaded end connections. All valves are assembled with silicone free... [See More]
- Material: Corzan; PVC; CPVC; PP
- Maximum Pressure: 250.00
- Valve Size: 0.25 to 6.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
Maximum Operating Pressure 125 psi. Maximum Operating Temperature 140F. Ball Through Hole Diameter .312. The 326 Series Three-Way Ball Valve design promotes multiple configurations to fit the exact end use application. The bottom port is common and the 326 Series can be used as a diverter or... [See More]
- Material: PVC
- Number of Ports: 3
- Valve Size: 0.25
from Hayward Flow Control
The TBH Series features a low maintenance design with its new patent pending System2 ™ Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern – on all... [See More]
- Material: BFPP; PVC; CPVC
- Maximum Pressure: 250.00
- Valve Size: 0.25 to 2.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 2.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
Maximum Operating Pressure 125 psi. Maximum Operating Temperature 140F. Ball Through Hole Diameter .312. The 326 Series Three-Way Ball Valve design promotes multiple configurations to fit the exact end use application. The bottom port is common and the 326 Series can be used as a diverter or... [See More]
- Material: PVC
- Number of Ports: 3
- Valve Size: 0.25
from Hayward Flow Control
The TBH-Z Series (Z-Ball) true union ball valves have a drilled ball to vent gases for sodium hypochlorite service. Available in PVC or CPVC materials with FPM o-rings only and PTFE seats. Sizes are 1/2" to 2" with IPS or DIN/EN socket, threaded and flanged end connections. All valves are assembled... [See More]
- Material: BFPP; PVC; CPVC
- Maximum Pressure: 250.00
- Valve Size: 0.25 to 2.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
Maximum Operating Pressure 125 psi. Maximum Operating Temperature 140F. Ball Through Hole Diameter .312. The 326 Series Three-Way Ball Valve design promotes multiple configurations to fit the exact end use application. The bottom port is common and the 326 Series can be used as a diverter or... [See More]
- Material: PVC
- Number of Ports: 3
- Valve Size: 0.25
- Connection Description: Tube Fitting
from Hayward Flow Control
TB Series true union ball valves are offered in PVC, CPVC and the new Platinum GFPP. O-rings are FPM or EPDM and seats are PTFE. Up to 2 in. sizes have socket and threaded end connections. A trigger style lockout handle is an option. All valves are assembled with silicone free lubricant. Features:... [See More]
- Material: PVC; CPVC (optional feature)
- Maximum Pressure: 150.00 to 250.00
- Valve Size: 0.25 to 6.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
Maximum Operating Pressure 125 psi. Maximum Operating Temperature 140F. Ball Through Hole Diameter .437. The 350 Series Three-Way Ball Valve design promotes multiple configurations to fit the exact end use application. The bottom port is common and the 350 Series can be used as a diverter or... [See More]
- Material: PVC
- Number of Ports: 3
- Valve Size: 0.25
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
Maximum Operating Pressure 125 psi. Maximum Operating Temperature 140F. Ball Through Hole Diameter .437. The 350 Series Three-Way Ball Valve design promotes multiple configurations to fit the exact end use application. The bottom port is common and the 350 Series can be used as a diverter or... [See More]
- Material: PVC
- Number of Ports: 3
- Valve Size: 0.50
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
Maximum Operating Pressure 125 psi. Maximum Operating Temperature 140F. Ball Through Hole Diameter .437. The 350 Series Three-Way Ball Valve design promotes multiple configurations to fit the exact end use application. The bottom port is common and the 350 Series can be used as a diverter or... [See More]
- Material: PVC
- Number of Ports: 3
- Valve Size: 0.50
- Connection Description: Socket Weld
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 7.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
Maximum Operating Pressure 125 psi. Maximum Operating Temperature 140F. Ball Through Hole Diameter .437. The 350 Series Three-Way Ball Valve design promotes multiple configurations to fit the exact end use application. The bottom port is common and the 350 Series can be used as a diverter or... [See More]
- Material: PVC
- Number of Ports: 3
- Valve Size: 0.38
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 2.00
from U.S. Plastic Corporation
Maximum Operating Pressure 125 psi. Maximum Operating Temperature 140F. Ball Through Hole Diameter .375. The 629 Series Three-Way Trunnion Ball Valve design promotes multiple configurations to fit the exact end use application. The bottom port is common and the 629 can be used as a diverter or... [See More]
- Material: PVC
- Number of Ports: 3
- Valve Size: 0.25
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 2.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
Maximum Operating Pressure 125 psi. Maximum Operating Temperature 140F. Ball Through Hole Diameter .375. The 629 Series Three-Way Trunnion Ball Valve design promotes multiple configurations to fit the exact end use application. The bottom port is common and the 629 can be used as a diverter or... [See More]
- Material: PVC
- Number of Ports: 3
- Valve Size: 0.25
from Cole-Parmer
Ball Valves [See More]
- Material: PVC
- Flow (Cv): 2.00
- Maximum Pressure: 125.00
from U.S. Plastic Corporation
The 074 series two-way ball valve design promotes multiple configurations to fit the exact end use application. The Inlet Seal is Santoprene. The Outlet Seal is PTFE. The Body and handle is made of standard gray PVC. NSF Standard 61 approved materials. Max operating pressure 125 PSI at 140. Ball... [See More]
- Material: PVC
- Number of Ports: 2
- Valve Size: 0.75
from Cole-Parmer
Ball valves give you precise control over the entire 180 <deg > range. True union design lets you remove wetted parts. Valves have Viton <reg > body seals and seats. Less than 5" overall length. Calibrated in 5 <deg > increments. [See More]
- Material: PVC
from U.S. Plastic Corporation
The 074 series two-way ball valve design promotes multiple configurations to fit the exact end use application. The Inlet Seal is Santoprene. The Outlet Seal is PTFE. The Body and handle is made of standard gray PVC. NSF Standard 61 approved materials. Max operating pressure 125 PSI at 140. Ball... [See More]
- Material: PVC
- Number of Ports: 2
- Valve Size: 0.75
from Cole-Parmer
bull; Quarter-turn valves offer numerous standard features. • Four limit switches provide electrical control of actuator. • NEMA 4X electrical enclosure. • Position indicators show yellow for open and red for closed valve. • Clutchless manual override allows you to close valve... [See More]
- Material: PVC
- Flow (Cv): 1235.00
- Maximum Pressure: 225.00
from U.S. Plastic Corporation
The 074 series two-way ball valve design promotes multiple configurations to fit the exact end use application. The Inlet Seal is Santoprene. The Outlet Seal is PTFE. The Body and handle is made of standard gray PVC. NSF Standard 61 approved materials. Max operating pressure 125 PSI at 140. Ball... [See More]
- Material: PVC
- Number of Ports: 2
- Valve Size: 0.75