PVDF Ball Valves
from Plast-O-Matic Valves, Inc.
Valve body, stem, ball, seat carrier, union nuts and connections are choice of PVC, CPVC, beige polypro, or PVDF. Seats are PTFE; O-rings are choice of EPDM or FKM. Handle is molded of ABS. Maximum test pressure under laboratory conditions at 75°F is 235 PSI on 1/2" through 2" sizes, 150 PSI on 3"... [See More]
- Material: PVC; CPVC; PVDF
- Number of Ports: 2
- Valve Size: 0.50 to 4.00
- Connection Description: Union
from Asahi/America, Inc.
The AVBVX allows for a simple transition between rigid PVC pipe and flexible PFA tubing integrated into Asahi/America ’s Type-21 manual ball valve. PFA x PFA versions are also available. [See More]
-
Material:
PVC, CPVC, PP, PVDF
; PVC; PP; PVDF
-
Connection Description: Threaded;
Socket, Threaded, Flanged, series Flowell 60
series, Super Type Pillar fitting, Super 300 Type Pillar fitting , Flare Type, Hose nipple
from Plast-O-Matic Valves, Inc.
Valve body, stem, ball, seat carrier, union nuts & connections are choice of PVC, CPVC, polypro, or PVDF. Seats are PTFE; o-rings are choice of EPDM or FKM. Handle is molded of ABS. Mounting threads (non-wetted) are brass and 304 stainless steel. Maximum test pressure under laboratory conditions at... [See More]
- Material: PVC; CPVC; PVDF
- Number of Ports: 2
- Valve Size: 0.50 to 4.00
- Connection Description: Union
from Asahi/America, Inc.
The Asahi/America ball check valve employs a free moving ball, which unseats to permit flow in one direction, but seals against a seat to prevent backflow. It may be installed vertically or horizontally. Also available as foot valve for suction side of pump. [See More]
-
Material:
PVC, CPVC, PP and PVDF
; PVC; PP; PVDF - Actuation: Manual
- Valve Size: 0.50 to 4.00
from Asahi/America, Inc.
Type-23 Multiport ® plastic ball valves are three way ball valves with true union design. The use of a multiport ball valve simplifies piping and eliminates the need for an additional valve and tee fitting. A “L ” ported ball valve permits flow from the bottom entry to either the... [See More]
-
Material:
PVC, CPVC, PP, PVDF
; PVC; PP; PVDF -
Connection Description: Threaded;
Socket, Threaded, Butt (Spigot) DIN Socket, IPS Socket, Flanged
*6” end connections available for 4" valve bodies
- Valve Size: 0.50 to 4.00
- Actuation: Manual
from Asahi/America, Inc.
2 to 5-way ball valves (Series 6L) in PP, natural PP, PVDF and PFA. Manual operated. [See More]
-
Material:
PP, PVDF, PFA
; PP; PVDF -
Connection Description: Threaded;
G or NPT Thread
- Valve Size: 0.25 to 0.50
from Asahi/America, Inc.
Plastic Manual Ball Valves. Type-21/21a ball valves are corrosion resistant plastic manual true union design quarter turn valves with hyperbolic flow characteristics, low pressure drops and reliable sealing. They are typically used in on/off applications and are offer relatively poor flow control. [See More]
-
Material:
PVC, CPVC, PP, and PVDF
; PVC; PP; PVDF
- Valve Size: 0.50 to 4.00
from DK-LOK U.S.A.
Up to 10000psig (689 bar). Up to 230 ℃ (446 ℉). SS316, Carbon Steel. 2-way and 3-way side and bottom entry. DK patented Locking Device optional. Panel Mounting optional. DK-LOK OD 1/4 - OD 1 inch. Pipe thread 1/4 -1 inch [See More]
- Material: Stainless Steel; Fluorocarbon O-Ring, Optional PCTFE; PEEK (optional feature); PTFE; PVDF
- Maximum Pressure: 10000.00
- Valve Size: 0.39
- Number of Ports: 2
from Hayward Flow Control
The IV Series Injection Valves and IQ Series Injection Quills facilitate injection of chemicals away from pipe or tank inner walls, ensuring rapid mixing and preventing corrosion. Each design includes a built-in ball check valve with Hastelloy CTM spring to prevent back-flow of the process liquid... [See More]
- Material: FPM or EPDM O-Ring Seals; PVC; CPVC; PVDF
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 1.00
- Number of Ports: 2
from U.S. Plastic Corporation
Ball valves perform a quarter turn on/off or modulating function. A flow-controlling ball located within the body of the valve contains a hole through its center along one axis, which connects the inlet and outlet ports of the body. The ball itself is held in place by, and rotates 90 within, PTFE... [See More]
- Material: PVDF
- Connection Description: Threaded; Union
- Valve Size: 0.50
from NIBCO INC.
Natural Kynar ® (PVDF) valves for use with ultra-pure water, deionized/distilled and demineralized water systems, clean chemical processes, pharmaceutical operations and food processing. Valve pressure rating 150 psi at 73 °F water non-shock full-port, Maximum service temperature 180 °F,... [See More]
- Material: PP; PVDF
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 3.00
- Number of Ports: 2
from GF Piping Systems
A broad spectrum of product features provides you with quality, flexibility, and reliability, in addition to modularity. GF Piping Systems has 40 years experience in plastic valves. GF Piping Systems offers 3-way diverter valves, metering valves as well as basic plastic ball valves to meet all your... [See More]
- Material: ABS; PVC; CPVC; PVDF
- Maximum Pressure: 232.00
- Valve Size: 0.38 to 6.00
- Number of Ports: 2 to 3
from DK-LOK U.S.A.
Up to 10000psig (689 bar). Up to 230 ℃ (446 ℉). SS316, Carbon Steel. 2-way and 3-way side and bottom entry. DK patented Locking Device optional. Panel Mounting optional. DK-LOK OD 1/4 - OD 1 inch. Pipe thread 1/4 -1 inch [See More]
- Material: Stainless Steel; FKM End Sealing, PCTFE; PEEK; PTFE; PVDF
- Maximum Pressure: 6000.00
- Valve Size: 0.39
- Number of Ports: 3
from Hayward Flow Control
TBB Series true union ball valves are offered in PVC, Corzan CPVC, PP and PVDF. O-rings are FPM or EPDM. Up to 2 in. sizes have socket and threaded end connections. All seats are PTFE. Features. PVC, CPVC, PP and PVDF. Full Port Design. Easy Maintenance. FPM or EPDM Seals. Easily Automated. Double... [See More]
- Material: Corzan; PVC; CPVC; PP; PVDF
- Maximum Pressure: 225.00
- Valve Size: 0.50 to 4.00
- Number of Ports: 2
from U.S. Plastic Corporation
Lock and meter ring enables the ball valve to be positioned in several different locking modes, while providing an additional safety feature against unintentional valve activation. Enables locking against unauthorized operation. Compact construction. Low operating forces. Light weight. Temp. ranges:... [See More]
- Material: PVDF
from NIBCO INC.
Red Kynar ® (PVDF) valves for use with hot corrosive liquids, chemical processing, industrial plating, and waste treatment systems. Valve pressure rating 150 psi at 73 °F water non-shock full-port, Maximum service temperature 280 °F, Full port, True Bloc ® design, FKM O-ring, Female... [See More]
- Material: PP; PVDF
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 4.00
- Number of Ports: 2
from GF Piping Systems
Ball Valves: Available in PVC and CPVC, the type 104 ball valve from Georg Fischer offers an economic solution for less demanding applications. The type 104 is based on the same industrial ball valve Georg Fischer uses in other applications. This means the valve is true union and can be repaired if... [See More]
- Material: ABS; PVC; CPVC; PP; PVDF
- Maximum Pressure: 150.00 to 232.00
- Valve Size: 0.38 to 12.00
- Number of Ports: 2 to 3
from DK-LOK U.S.A.
Up to 10000psig (689 bar). Up to 230 ℃ (446 ℉). SS316, Carbon Steel. 2-way and 3-way side and bottom entry. DK patented Locking Device optional. Panel Mounting optional. DK-LOK OD 1/4 - OD 1 inch. Pipe thread 1/4 -1 inch [See More]
- Material: Stainless Steel; FKM End Sealing, PCTFE; PEEK; PTFE; PVDF
- Maximum Pressure: 6000.00
- Valve Size: 0.39
- Number of Ports: 3
from GF Piping Systems
Ball Valves: The Type 230 Series Pneumatically Actuated Ball Valve from Georg Fischer is the ultimate choice for the high demands of the industrial world. It is available in PVC, CPVC, PP-H, and PVDF material. The valve can be configured for throttling or for simple open/close functionality. The... [See More]
- Material: ABS; PVC; CPVC; PP; PVDF
- Maximum Pressure: 150.00 to 232.00
- Valve Size: 0.38 to 12.00
- Number of Ports: 2 to 3