-
Supplier: DCM Tech Inc.
Description: Intelligent Autofeed not only advances the grinding wheel but senses motor load and backs off incrementally if the wheel loads up. At the end of the grinding cycle this incremental wheel retraction provides a final sparkout for improved finish and surface accuracy.
- Automation: None / Manual, Automatic / Indexing, Other
- Current: 30 amps
- Driver Technology: Electric Motor / Vibrator
- Industry / Product Applications: Automotive, Brakes / Clutches, Flywheels, MRO / Resurfacing, Wet Grinding / Finishing
-
Supplier: DCM Tech Inc.
Description: The Model IG 080 M has all the benefits of a BIG rotary surface grinder but in a smaller economic footprint. The 18" table and 10hp spindle provide strong straight forward grinding performance for rough grinding as well as mid-tolerance work. Grinding Applications:
- Automation: Automatic / Indexing, PLC
- Current: 40 amps
- Driver Technology: Electric Motor / Vibrator
- Industry / Product Applications: Aerospace, Automotive, Bearing, Biotech / Medical Devices, Brakes / Clutches, Castings, Cleaning / Surface Preparation, MRO / Resurfacing, Ophthalmic / Optical, Tool and Die (e.g., Punches), Wet Grinding / Finishing
-
Supplier: DCM Tech Inc.
Description: control, self dressing CBN abrasives, through spindle coolant and universal fixturing that accepts Amada, Trumpf, Salvagnini, Finnpower, Weideman, Whitney, and other style tooling. Sharpen large station dies and rooftop/shear angle tooling up to 10 degrees with the standard fixturing package.
- Automation: Automatic / Indexing, PLC
- Current: 30 amps
- Driver Technology: Electric Motor / Vibrator
- Industry / Product Applications: Aerospace, Automotive, Biotech / Medical Devices, MRO / Resurfacing, Tool and Die (e.g., Punches), Wet Grinding / Finishing
-
-
Supplier: DCM Tech Inc.
Description: where air quality is crucial. Designed with glass, ceramic and crystal fabrication in mind, the IG 180 SD Rotary Table Surface Grinder also works well for mid volume metal grinding applications. The servo drive control package saves multiple programs for process repeatability. Grinding
- Automation: Automatic / Indexing, PLC, Other
- Current: 60 amps
- Driver Technology: Electric Motor / Vibrator
- Industry / Product Applications: Aerospace, Automotive, Bearing, Biotech / Medical Devices, Brakes / Clutches, Castings, Cleaning / Surface Preparation, Cutters / Blades, MRO / Resurfacing, Ophthalmic / Optical, Semiconductors / Electronics, Wet Grinding / Finishing
-
Supplier: Norton Abrasives
Description: Bench & Pedestal Wheel Gemini Medium
- Abrasive Grain Type: Silicon Carbide
- Applications: Intermediate Cut & Finish (Medium Grits), Bench / Pedestal, Dry Grinding, Toolroom / Sharpening
- Bond Type: Vitrified
- Bore ID / Shank Diameter: 1.25 inch
-
Supplier: Norton Abrasives
Description: Norton SG®5SG60-GVSP Vit. Wheel
- Abrasive Grain Type: Aluminum Oxide
- Applications: Intermediate Cut & Finish (Medium Grits), Bench / Pedestal, Surface / Creepfeed Grinding, Toolroom / Sharpening, Wet Grinding
- Bond Type: Vitrified
- Bore ID / Shank Diameter: 3 inch
-
Supplier: Norton Abrasives
Description: Norton® 39C60-JVK Vitrified Wheel
- Abrasive Grain Type: Silicon Carbide
- Applications: Intermediate Cut & Finish (Medium Grits), Bench / Pedestal, Surface / Creepfeed Grinding, Toolroom / Sharpening, Wet Grinding
- Bond Type: Vitrified
- Bore ID / Shank Diameter: 3 inch
-
Supplier: Norton Abrasives
Description: Norton SG®5SG60-JVS Vitrified Wheel
- Abrasive Grain Type: Aluminum Oxide
- Applications: Intermediate Cut & Finish (Medium Grits), Bench / Pedestal, Surface / Creepfeed Grinding, Toolroom / Sharpening, Wet Grinding
- Bond Type: Vitrified
- Bore ID / Shank Diameter: 3 inch
-
Supplier: Flexovit USA, Inc.
Description: Precision balanced for vibration-free running. Individually packaged - U.P.S. approved single wheel box. Vitrified bonded aluminum oxide wheel for general purpose grinding of carbon and stainless steel and other alloys. General Grinding - A36 For general grinding.
- Abrasive Grain Type: Aluminum Oxide
- Applications: Intermediate Cut & Finish (Medium Grits), Bench / Pedestal
- Bond Type: Vitrified
- Bore ID / Shank Diameter: 1.25 inch
-
Supplier: Flexovit USA, Inc.
Description: Precision balanced for vibration-free running. Individually packaged - U.P.S. approved single wheel box. Vitrified bonded aluminum oxide wheel for general purpose grinding of carbon and stainless steel and other alloys. Rough Grinding - A24 For rough grinding.
- Abrasive Grain Type: Aluminum Oxide
- Applications: Material Removal / Roughing (Coarse Grits), Bench / Pedestal
- Bond Type: Vitrified
- Bore ID / Shank Diameter: 1.25 inch
-
Supplier: Walter Surface Technologies
Description: Long lasting and dependable, our bench grinding wheels are perfect for general purpose grinding work on bench and pedestal grinders. All wheels are supplied with nested reducer bushings to fit on 1", 3/4", 5/8" and 1/2" shafts. Features Excellent wheel life
- Applications: Bench / Pedestal
- Bore ID / Shank Diameter: 1 inch
- Mounting: Bore / Center Mount
- Outer Diameter (OD): 6 to 10 inch
-
Supplier: Flexovit USA, Inc.
Description: Green silicon carbide grain is the toughest abrasive for sharpening or grinding hard or very soft materials. Extremely sharp grain for faster, burr-free cutting on tungsten carbide, brass, bronze, aluminum and masonry. Finish Grinding - GC120 For finish grinding.
- Abrasive Grain Type: Silicon Carbide
- Applications: Finishing / Light Cutting (Fine Grits), Bench / Pedestal
- Bore ID / Shank Diameter: 1.25 inch
- Outer Diameter (OD): 10 inch
-
Supplier: Flexovit USA, Inc.
Description: Green silicon carbide grain is the toughest abrasive for sharpening or grinding hard or very soft materials. Extremely sharp grain for faster, burr-free cutting on tungsten carbide, brass, bronze, aluminum and masonry. Rough Grinding - GC60 For rough grinding.
- Abrasive Grain Type: Silicon Carbide
- Applications: Material Removal / Roughing (Coarse Grits), Bench / Pedestal
- Bore ID / Shank Diameter: 1.25 inch
- Outer Diameter (OD): 10 inch
Find Suppliers by Category Top
Featured Products Top
-
Typical Dimension: 100×40(32)×40×5×10 100×40(32)×40×10×10 125×40(32)×40×5×10 125×40(32)×40×7×10 (read more)
Browse Grinding Wheels Datasheets for Kunshan Xinlun Superabrasives Co., Ltd. -
Main Grit Size: W3.5, W5, W7, W10, W14, W20, W28, W40, W50, W60, etc Application: Peripheral grinding for indexable inserts Material of inserts: carbide, cermet , PCD,PCBN, etc Machine: WAIDA from Japan, Wendt , Ewag, Coborn, Agathon, etc. (read more)
Browse Grinding Wheels Datasheets for Kunshan Xinlun Superabrasives Co., Ltd. -
High speed,high efficiency, high precision and long tool life are qualities you can see in Vitrified CBN grinding wheels. Wheel: 500*43*40*10*33*R1 CBN 120/140 V Machine: Germany JUCRANK 6S Surface roughness: Ra0.4 Roundness: 5μm Cylindricity: 5μm Tool life: 12000pcs (read more)
Browse Grinding Wheels Datasheets for Kunshan Xinlun Superabrasives Co., Ltd. -
Applications: Nozzle/fuel sprayer grinding; Pole piece assembly grinding; Application Example: Nozzle Bore Grinding Wheel : 4*6*2.05-M2, 95000rpm Machine (read more)
Browse Grinding Wheels Datasheets for Kunshan Xinlun Superabrasives Co., Ltd. -
35° Feed rate: 75mm/min Feed depth: 4mm Result: Flutes are ground by one cut, no smoke and no noise during grinding, no burn on workpiece Application Example 2 Wheel: 1A1 125*20*10*12 B107, 20m (read more)
Browse Grinding Wheels Datasheets for Kunshan Xinlun Superabrasives Co., Ltd. -
Wheel:500*500*304.8*6*50 CBN 140/170 V(10 wheel making 1 set) Machine: C4520F Surface roughness: Ra0.15 Roundness: 1μm Cylindricity: 1μm Tool life: 2300000pcs We would like to share advantages of our company with you as below (read more)
Browse Grinding Wheels Datasheets for Kunshan Xinlun Superabrasives Co., Ltd. -
Wheel: 500*43*40*10*33*R1 CBN 120/140 V Machine: Germany JUCRANK 6S Surface roughness: Ra0.4 Roundness: 5μm Cylindricity: 5μm Tool life: 12000pcs We would like to share advantages of our company with you as below: a. Focus (read more)
Browse Grinding Wheels Datasheets for Kunshan Xinlun Superabrasives Co., Ltd. -
Wheel: Φ 1A1 500*50*304.8*(5.5+4.5)*50, 8pcs/1set, 60-807m/s Machine: Centre less Grinder Workpiece: 100Cr6Si 58-64HRC Rz1.0 Remove Stock: 0.1mm,on diameters. Dressing Frequency: 8mil -10mil pcs Tool life: 200 mil (read more)
Browse Grinding Wheels Datasheets for Kunshan Xinlun Superabrasives Co., Ltd. -
Unleash the Power of Precision with Our High-Speed CBN Grinding Wheel • Product Specification: Wheel Size: 462.05-M2 Speed: 95000rpm Machine: ULTRA-1-Twinner Workpiece Material: 18CrNi8, HRc58 (read more)
Browse Grinding Wheels Datasheets for Kunshan Xinlun Superabrasives Co., Ltd. -
Dressing Cycle: 10 pcs Dressing Depth: 0.002 Life: 1600 The advantages of our company: 1.Focus on CBN/diamond grinding wheels: having invention patents and utility model patents concerning grinding wheels manufacturing (read more)
Browse Grinding Wheels Datasheets for Kunshan Xinlun Superabrasives Co., Ltd.
More Information Top
-
Compiled by the American Ceramic Society
Ma- chining of porcelah iAsulators (I) efficiency in cutting-off with grinding wheels, ( 10 ) 263f; (11) cutting offwith grinding wheels in the wet state, (11) 279j.
-
The Scintillation Counter
The mirror was made from the hemi- spherical bottom of a Corning T- 10 glass bottle, cut off with a wet carborundum wheel , and ground to the dimensions shown in Fig. 9.
-
CERAMIC ABSTRACTS
honing stone, elongated, P (10) 225g. for polygonal articles, P (8) 187e. vibrogrinder, use for grinding dyes, ( 10 ) 243d. for wet grinding of solids, P (11) 27'4a. wheel P (9) 196c. binhers. wollastonite in. (4) 79e Ceramic Abstracts-Subject Index .
-
Effect of grinding conditions on the fatigue life of titanium 5Al-2.5Sn alloy
The fatigue life of specimens ground under wet conditions showed a significant increase at the wheel speed of 2000 fpm ( 10 m sec -1) for both grit sizes, and thereafter decreased with increase in speed to below that of the virgin material.
-
The role of cooling in creep feed grinding
The graph shows three different heat transfer coefficients: one for the workpiece, and two for the wheel /fluid, depending on whether (kpc)~ is for wet grinding (equation ( 10 )) or dry grinding (140 Ws'/meK).
-
Frontiers of Mechanical Engineering and Materials Engineering
This machine adopts crawler walking system, with smaller ground pressure of unit area [ 10 ], better trafficability on wet and soft ground , and better work adaptability compared with the wheel tractor of the same weight.
-
Evaluation of a reactive plasticizer in denture acrylics
The samples were removed from the molds, cut to approximately dimensions, and then finished to 10 mm x 3 mm x 75 mm using a series of Sic papers on a wet grinding wheel .
-
CERAMIC ABSTRACTS
… components. relation's between material prop- erties and grinding characteristics using dia- mond wheels on ceramics for, (6) 119d. components, wet grinding of ceramics for, with minute grained diamond wheels (7) 161h. conductive patterns … … ikaglio pro- cess, P ( 10 ) 266b. for controlling resonant …
-
Formation and Bonding Mechanism of Solution Derived -Al2O3 Coating on Carbide Substrate
Though the substrate would be well wetted by this kind of sol to form a good interface layer betweenThe carbide inserts were ground with a diamond wheel and chemically etched for 10 min in a diluted .
-
Thermal Spray Fundamentals
Wet grinding is preferred to dry grinding because of the greater latitude in abrasive and wheel selection; it also allows using harder wheels resulting in better finishes and less dressing [ 10 ].