-
Supplier: ValueTronics International, Inc.
Description: -value contact resistance on aircraft outer skins (lightning protection, wick test), and for general low-resistance measurements. The METRAHIT 27M milliohm resistance meters are the modern alternative for the well known TH2 (Thomson) and Wh2 (Wheatstone) measuring bridges. They
-
Supplier: ValueTronics International, Inc.
Description: The M227B is a milli ohmmeter from Gossen Metrawatt. Features: Insulation tester, milliohm resistance meter and multimeter with memory1 Insulation resistance tester- Testing with 50 to 500 V for components, cables and
-
Supplier: ValueTronics International, Inc.
Description: The METRAHIT H+E CAR is a milli ohmmeter from Gossen Metrawatt. Features: Insulation resistance tester Testing with 50 to 500 V for components, cables and conductors, for example in aircraft and in on-board electrical systems LCD panel with background
-
-
Supplier: ValueTronics International, Inc.
Description: potentially explosive atmospheres in accordance with Ex II 2 G Ex ia IIA T4 Gb. The Gossen Metrawatt METRAHIT 27EX AIRBUS compact milli ohmmeter is for the measurement of low value contact resistance in potentially explosive atmospheres, for example at contacts inside aircraft fuel tanks
-
Supplier: RS Components, Ltd.
Description: The Metra Hit multimeter is a compact milliohm resistance meter plus digital multimeter and thermometer for the measurement of low-value contact resistance on aircraft outer skins (lightning protection, wick test), and for general low-resistance measurements. The multimeter is
- Electrical Measurements: Other
- Form Factor: Handheld
- Resistance / Impedance Range: 30000 kohms
Find Suppliers by Category Top
More Information Top
-
New products
TEGAM’s Model R1L-E2A can be used in a wide variety of applications outside the capabilities of other bond meters , including: ◗ aircraft bond measurements in manufacturing and flight line maintenance operations where JP4 and aviation gaso- line might be present, ◗ … … Model R1L-E2A has five ranges, with full-scale values ranging from 2 milliohms to 20 ohms.
-
CR4 - Thread: Equipment for Electrical Conductivity Measurements
If you are doing an incoming inspection on sheet metal, any meter with the proper sensitivity will … Aircraft have stringent bonding requirements so that end-to-end they are 2.5 milliohms dc resistance, or less.
-
CR4 - Thread: Mobile phone threat?
A crummy cable shield at cell phone frequencies might have a transfer impedance of 1 Ohm per meter, but we are only interested in the first 8 cm of that meter , so that we are looking at 80 milliohms of transfer impedance. … system, but safety critical signals at these levels are not run on long cables through the aircraft .
Indicates content that may require registration and/or purchase.