-
Supplier: NIBCO INC.
Description: Polyvinyl chloride (PVC) Schedule 40 pressure fittings are used for potable water, chilled water, irrigation, golf course construction, and pool & spa applications. PVC is one of the thermoplastic materials most frequently specified for a variety of products used in the
- Category: Adapter, Coupling, Elbow, Reducer, Tee
- Connection: Threaded, Weld
- English Size: 0.5000 to 8 inch
- Material: PVC/CPVC
-
Supplier: Dura Plastic Products, Inc.
Description: Schedule 40:Pipe Extender:Spg x Pipe ID
- English Size: 1.25 inch
- Size: English
-
Supplier: Dura Plastic Products, Inc.
Description: Schedule 40:Cap:Fipt
- Connection: Threaded
- English Size: 0.5000 inch
- Size: English
-
-
Supplier: Dura Plastic Products, Inc.
Description: Schedule 40:Plug:Spg
- English Size: 1.5 inch
- Size: English
-
Supplier: Dura Plastic Products, Inc.
Description: Schedule 40:Plug:Mipt
- Connection: Threaded
- English Size: 0.2500 inch
- Size: English
-
Supplier: U.S. Plastic Corporation
Description: These nipples are NSF listed. This CPVC material has comparable corrosion resistance to PVC yet it is suitable for handling corrosive material at temps 40 - 60 F higher than PVC. Use PTFE thread lubricant or tape.
- Category: Nipple
- Material: PVC/CPVC
-
Supplier: Latrobe Foundry Machine & Supply Co.
Description: Standard coupling, Schedule 40. National pipe threads in accordance with ANSI/ASME B1.20.1. Fittings are right-hand threaded. The fittings have a general conformance with dimensional standard MIL-DTL-52618-E. Fittings are random tested at 120 pounds of air
- Category: Coupling
- English Size: 1 inch
- Size: English
-
Supplier: Latrobe Foundry Machine & Supply Co.
Description: Standard coupling, Schedule 40. National pipe threads in accordance with ANSI/ASME B1.20.1. Fittings are right-hand threaded. The fittings have a general conformance with dimensional standard MIL-DTL-52618-E. Fittings are random tested at 120 pounds of air
- Category: Coupling
- English Size: 0.7500 inch
- Size: English
-
Supplier: Latrobe Foundry Machine & Supply Co.
Description: Standard coupling, Schedule 40. National pipe threads in accordance with ANSI/ASME B1.20.1. Fittings are right-hand threaded. The fittings have a general conformance with dimensional standard MIL-DTL-52618-E. Fittings are random tested at 120 pounds of air
- Category: Coupling
- English Size: 0.1250 inch
- Size: English
-
Supplier: Latrobe Foundry Machine & Supply Co.
Description: Standard coupling, Schedule 40. National pipe threads in accordance with ANSI/ASME B1.20.1. Fittings are right-hand threaded. The fittings have a general conformance with dimensional standard MIL-DTL-52618-E. Fittings are random tested at 120 pounds of air
- Category: Coupling
- English Size: 1 inch
- Size: English
-
Supplier: Accuris
Description: STANDARD SPECIFICATION FOR ACRYLONITRILE- BUTADIENE-STYRENE (ABS) PLASTIC PIPE FITTINGS, SCHEDULE 40 (R 1985)
-
Supplier: Accuris
Description: Standard Specification for Acrylonitrile-Butadi ene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
-
Supplier: Accuris
Description: STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PLASTIC PIPE FITTINGS, SCHEDULE 40
-
Supplier: Accuris
Description: Specification for Butt Fusion Polyethylene (PE) Plastic Pipe Fittings, Schedule 40
-
Supplier: ASTM International
Description: This specification covers poly(vinyl chloride) (PVC) Schedule 40 pipe fittings made from four PVC plastic compounds and intended for use with Iron Pipe Size (IPS) outside-diameter plastic pipe. Fittings fabricated by welding are not included in this
-
Supplier: Kuriyama of America, Inc.
Description: Schedule 40 TOE (threaded one end) pipe nipple with with NPT threads. Other threads and schedules available.
-
Supplier: Mid-America Fittings, Inc.
Description: Different lengths available
- English Size: 2 inch
- Material: Stainless Steel
- Size: English
-
Supplier: U.S. Plastic Corporation
Description: Quickly and easily removes pipe from solvent welded or threaded fittings. Save time and money over replacing whole assembly. Perfect for plumbing, irrigation and pool/spa contractors. Removes Schedule 40 plastic pipe. Cuts ABS or PVC DWV pipe below slab.
- Cutting Diameter: 3 inch
- Product Packaging: Individual Reamer
- Reamer Type: Taper Pipe Reamer
- Size Units: English / Fractional
-
Supplier: U.S. Plastic Corporation
Description: cracking so it is machinable. SCH40 socket fittings ASTM D-2466; SCH80 socket fittings ASTM D-2467; SCH80 threaded fittings ASTM D-2464. Pipe ASTM D-1785. PSI is based on water at 73F. Derate 50% at 110F and 78% at 140F. Schedule 40 is for socket
- Material: PVC
- Pipe Schedule (if applicable): 40
-
Supplier: Victaulic Co. of America
Description: ADAPTER TYPE CARBON STEEL MATERIAL 6 OVERALL LENGTH 3 SIZE A 3 SIZE B 40 S SCHEDULE UL (CANADA AND US), FM, CTP, LPCB, VDS APPLICABLE STANDARD BUILDING SERVICE, FIRE PROTECTION, MINING, OIL, GAS, CHEMICAL, INDUSTRIAL
- Category: Nipple
- English Size: 3 inch
- Material: Carbon & Alloy Steel
-
Supplier: Radwell International
Description: PIPE FITTINGS, PVC SCHEDULE 40 PRESSURE, 90 DEGREE ELBOW, S XS. FREE 2 YEAR RADWELL WARRANTY
- Category: Elbow
-
Supplier: Sharpe Products
Description: Dowels are 3" in length and can be used at expansion joints in pipe rails by welding one end and using an epoxy glue on the other end. To create an expansion joint, weld only one end. Tube Sizes Available: 1-1/2" O.D. in 16 Ga. Pipe Sizes Available: 1-1/4", 1-1/2" in Schedule
- English Size: 2 inch
- Material: Carbon & Alloy Steel
- Size: English
-
Supplier: U.S. Plastic Corporation
Description: These are Schedule 80 PVC socket fittings. Schedule 80 is also NSF listed, has a 33F - 140 F working temp, and is available in gray. For UV resistance of PVC pipe and fittings, paint with a white water based latex paint. Both have a wide variety of uses in the
- Material: PVC/CPVC
-
Supplier: UL Standards & Engagement
Description: 1 1.1 These requirements cover Schedule 40, Schedule 80, Type EB and Type A extruded rigid PVC (polyvinyl chloride) electrical conduit and fittings. These requirements also cover elbows, couplings, adapters, expansion, expansion-deflection , or deflection joints, and
-
Supplier: NewAge Performance Products | NAPP
Description: retardant; non-conductive Quick and easy glue-on installation with primer and cement Manufactured to schedule 40 dimensions; compatible with standard PVC pipe, fittings, and valves Applications Beverage Transmission & Processing • Chemical Processing
-
Supplier: GF Piping Systems
Description: systems. GF Harvel uses its own custom blend of PVC compound to ensure that desirable physical properties are maintained with every production run. Schedule 40 PVC Pipe: Schedule 40 PVC pipe and fittings are a low-cost alternative for applications
- Material: PVC
- Pipe Schedule (if applicable): 40, 80, 120, SDR 13.5, SDR 21, SDR 26, SDR 41
- Section Shape: Round
- Standard Nominal English Sizes: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 3 1/2", 4", 5", 6", 8", 10", 12", 14", 16", 18", 20", 22", 24"
-
Supplier: Sharpe Products
Description: The Type B - Bullet Drive-On Cap is a one piece construction, with the exception of the 1" pipe. Tube sizes have a wall thickness of 11 Ga.. Pipe sizes are available in Schedule 10 and Schedule 40. Height on the bullet drive cap is 1" with the exception of the
- English Size: 1 inch
- Material: Carbon & Alloy Steel
- Size: English
-
Supplier: Radwell International
Description: DISCONTINUED BY MANUFACTURER, PVC SCHEDULE 40 FITTING, 1INCH, SPIGOT. FREE 2 YEAR RADWELL WARRANTY
-
Supplier: Kuriyama of America, Inc.
Description: 126-128) Welds onto sanitary weld fittings or tubing. Schedule 40 pipe size. Durable 316 stainless steel. Smooth 32 Ra food contact surface finish. Certified to 3-A RPSCQC 62-02 for sanitary assemblies. Designed for use with KOA sanitary and standard KuriCrimp Ferrules.
- Material: Stainless Steel
- Type: Hose Fitting
-
Supplier: Kee Safety Inc.
Description: An internal spigot providing a flush joint between two pipes of the same diameter. Not as strong as Type 14 and must not be used where a direct tensile load is applied. This fitting can only be used with Schedule 40 steel pipe. PA Warning: Danger: Type 18
- Category: Coupling
- English Size: 1.25 inch
- Material: Iron (Cast/Ductile)
- Size: English
-
Supplier: Grinnell
Description: The Figure 405 Flexible Coupling is designed for installation on Stainless Steel schedule 10 and schedule 40 pipe and fittings. It is capable of pressures up to 750 psi (51,7 bar) depending on pipe size and wall thickness. It provides a dependable method of
- Category: Coupling
- English Size: 1.25 to 12 inch
- Material: Stainless Steel
- Size: English
-
Description: made for use with Schedule 5S or 10S pipe, for all NPS sizes listed in ASME B36.19M, except that for short pattern stub ends suitable for use with Schedule 40S are also shown.
-
Supplier: Hart Industries, International Inc.
Description: Flat faced design Zero leakage Viton O-Ring standard, Buna N, Teflon, EPDM, Neoprene also available (call for compatibility) All HART Industrial Unions are precision machined Sockets are deep counter-bored for perfect alignment on pipe ends Schedule 40, 80,160, or XXH bore
- Category: Union
- English Size: 0.3750 inch
- Material: Carbon & Alloy Steel, Stainless Steel
- Size: English
-
Supplier: Victaulic Co. of America
Description: Designed for securing Vic-Press Schedule 10S products onto ANSI Schedule 10S stainless steel pipe Tool package includes: (1) PFT510 tool, (2) 18V Lithium Ion batteries, (1) battery charger, (1) tool carrying case, (1) jaw carrying case, (1) each of jaws sized
- Application: Pipe Fitting
- Features: Battery-Powered
- Form Factor: Hand Tools
- Nominal Pipe Size: 0.5000 to 2 inch
-
Supplier: Cole-Parmer
Description: Metal Tee Fittings for copper, 316 stainless steel (SS), carbon steel (CS), and galvanized iron (schedule 40) pipes up to 2" in diameter. SS, CS, and galvanized iron fittings include PVDF insert for all sizes and NPT(F) threads at each end. Copper tee
Find Suppliers by Category Top
Featured Products Top
-
consist of a rigidly constructed box section fabricated from 1/4” steel plate and 1¼” schedule 40 steel pipe. The wheels on this cart are a steel core with solid rubber tires and have roller bearings and grease fittings. The cart (read more)
Browse Weights Datasheets for MarsMetal -
PRESSMAX - PRESSMAX GAS is the new press system component, 100% made in Italy, to be used in conjunction with schedule 10 to schedule 40 carbon steel pipe according to ASTM A53, A106, A135 and A795. watch the video to discover all the technical features. PRESSMAX - PRESSMAX VIDEO (read more)
Browse Gas Valves Datasheets for Bonomi North America, Inc. -
, velocities, and pressure drops. Just saying 2” PVC doesn’t give you all the information you need. You still need to know if it’s a schedule 40 or schedule 80. Similarly, you need to know if PP-RCT is SDR 9 or SDR 11. In these cases, the wall thickness, adjudicated by either pipe (read more)
Browse Piping Systems Datasheets for Asahi/America, Inc. -
, light duty, free-draining, blind-bore, V-grooved or conical bearings, for any standard pipe or tubing from 1 1/4″ 20 gauge tube through 6″, schedule-40 pipe are also available. Non-standard pipes can also be accommodated. Custom sizes available upon request. (read more)
Browse Hanger Bearings Datasheets for Woodex MECO Industries -
steel seat, disc, guard, retaining ring & spring Cracking pressure: 0.6 to 0.15 psi Temperatures to 450 degrees F Use in Schedule 40 pipe Meets ASME B16.34-2004 & MSS SP-126 Flange Finish per MSS SP-6 Seat Leakage per MSS SP-61 (read more)
Browse Check Valves Datasheets for DFT Inc. -
disappoints. These blowers are often only 20 – 40% efficient resulting in: Inadequate air flow and pressure to achieve the drying or blow off performance needed Higher energy costs Poor blower performance (read more)
Browse Fans and Blowers (industrial) Datasheets for Paxton Products, an ITW company -
Cubic Feet per Minute or Cubic Meters per Hour. Pressure Sensing Flowmeters for schedule 40 iron pipe and Type L Copper and nominal millimeter sizes are now available. They are CE and RoHS compliant and join EXAIR’s full line of Digital (read more)
Browse Flow Meters Datasheets for EXAIR -
.40” (10mm) so it can be used to convey small parts, granules, pellets, smoke or fumes. 901HA: Use the 901HA where an “in-line” conveying version of the 901DA is desired. The 901HA has a ¾” (19mm) suction collar and both (read more)
Browse Nozzles Datasheets for Vortec -
. A FITTING SOLUTION Indaco Metals CEO Josh Inda asked Krausse to research whether a scrap chopper could improve the efficiency of the operation. The company ultimately chose a Scrap Chopper Model 450 SL from Sweed Machinery. The chopper accepts continuous (read more)
Browse Refining and Recovery Equipment Datasheets for Sweed Machinery, Inc. -
the tool is already made and you’re scheduling another delivery of parts, then the molded components will be much faster. To give you an idea of tool creation timelines, the fastest, simplest tools made out of rigid foam may take about 40 to 120 hours to create (from design to first pour (read more)
Browse Plastic Molding Services Datasheets for General Plastics Manufacturing Co.