-
Supplier: Richardson RFPD
Description: The AD532 is the first pre-trimmed single chip monolithic multiplier/divider. It guarantees a maximum multiplying error of ±1.0% and a ±10 V output voltage without the need for any external trimming resistors or output op amp. Because the AD532 is internally trimmed, its
- Package / Form Factor: Other
-
Supplier: DigiKey
Description: IC MULTIPLIER 4-QUADRANT 8-CDIP
- Number of Stages: 4
- Package / Form Factor: Through Hole Technology (THT), Board Mounted
-
Supplier: DigiKey
Description: IC MULTIPLIER +/-10V 14-CDIP
- Number of Stages: 4
- Package / Form Factor: Through Hole Technology (THT), Board Mounted
-
-
Supplier: Quarktwin Technology Ltd.
Description: BCD Rate Multiplier IC 16-CDIP
- Operating Temperature: -67 to 257 F
- Package / Form Factor: Other
- RoHS Compliant: Yes
-
Supplier: Quarktwin Technology Ltd.
Description: AD40871 534JH IC
- RoHS Compliant: Yes
-
Description: IC ANALOG MULTIPLIER 8-DIP
- Package / Form Factor: Other
-
Description: IC MULTIPLIER ANALOG 8-SOIC
- Package / Form Factor: Other
-
Supplier: DigiKey
Description: IC MULTIPLIER ANALOG 8-SOIC
- Number of Stages: 4
- Package / Form Factor: Surface Mount Technology (SMT), Board Mounted
-
Description: IC PREC MULTIPLIER 14-CDIP
- Package / Form Factor: Other
-
Description: IC MULTIPLIER/DIVIDER 14CDIP
- Package / Form Factor: Other
-
Supplier: DigiKey
Description: IC PREC MULTIPLIER 14-CDIP
- Number of Stages: 4
- Package / Form Factor: Through Hole Technology (THT), Board Mounted
-
Supplier: Richardson RFPD
Description: directly to the output. This can be used to cancel a carrier or to apply a static offset voltage. The ADL5391 is fabricated on Analog Devices' proprietary, high performance, 65 GHz, SOI complementary SiGe bipolar IC process. It is available in a 16-lead, Pb-free, LFCSP and operates
- Package / Form Factor: Other
-
Supplier: Quarktwin Technology Ltd.
Description: IC
- RoHS Compliant: Yes
-
Supplier: Quarktwin Technology Ltd.
Description: IC 68-CPGA (29.47x29.47)
- Package / Form Factor: Other
- RoHS Compliant: Yes
-
Supplier: ODG (Origin Data Global)
Description: BIPOLAR MULTIPLIER 4QUAD
- IC Package Type: SOIC / SOP, Other
- Regulator Category: Linear Regulator
-
Supplier: Win Source Electronics
Description: Manufacturer: AMIS Category: Integrated Circuits (ICs)>Linear>Analog Multipliers, Dividers Package: 292-LBGA Product Status: Preliminary Type: Header, Male Pins, Shrouded (4 Side) Number of Outputs: Single Applications: Telecom Features: Linear Voltage Regulator IC Positive
- IC Package Type: Other
-
Supplier: Win Source Electronics
Description: Manufacturer: AMIS Category: Integrated Circuits (ICs)>Linear>Analog Multipliers, Dividers Packaging: Bulk Part Status: Obsolete Resistance (Ohms): 5 Power (Watts): 30 W Composition: Wirewound Features: Linear Voltage Regulator IC Positive Fixed 1 Output 800mA 8-SO PowerPad
- Power Rating: 30 watts
- Resistance Range: 5 ohms
- Technology / Construction: Wirewound Resistor
-
Supplier: Integrated Device Technology
Description: The 2402 is a high-performance Zero Delay Buffer ( ZDB ) which integrates IDT 's proprietary analog/digital Phase-Locked Loop ( PLL ) techniques. The chip is part of IDT 's ClockBlocksTM family and was designed as a performance upgrade to meet today's higher speed and lower voltage
- Device Type / Applications: Buffer
- IC Package Type: SOIC
- Pin Count: 8 #
- Supply Voltage: 3.3 V, 5 V
-
Supplier: Win Source Electronics
Description: : 1 (DE, E) Number of Rows: 3 Contact Type: Female Socket Flange Feature: Housing/Shell (4-40) Features: Linear Voltage Regulator IC Positive Fixed 2 Output 750mA, 100mA TO-220-5 Vertical Shell Material, Finish: Steel, Tin Plated
-
Supplier: Microchip Technology, Inc.
Description: controlled oscillator capability. Input switching can be manual or automatic. Using only a low-cost crystal or oscillator, the device can also serve as frequency synthesizer IC. Output jitter is typically 0.18 to 0.3ps RMS for an APLL-only integer multiply and 0.25 to 0.4ps RMS for
- Device Type: Clock Generator
- Package / Form Factor: Other
-
Supplier: Radwell International
Description: IC, SWITCH CAPACITOR, V CONV, 8SO; TOPOLOGY:DIVIDER, DOUBLER, INVERTING, MULTIPLIER; INPUT VOLTAGE MIN:1.5V; INPUT VOLTAGE MAX:10V; NO. OF OUTPUTS:1OUTPUTS; DC / DC CONVERTER IC CASE:SOIC; NO. OF PINS:8PINS; OUTPUT CURRENT:20MA; ROHS COMPLIANT: YES. FREE 2 YEAR
- Regulator Category: Switching Regulator
-
Supplier: ROHM Semiconductor USA, LLC
Description: resistors externally both the PFC part and the DC/DC part, IC enables power supply design free. In the PFC part, IC adopts peak current control operation. Suitable application is proposed by a various protection circuit, such as the multiplier with a revision circuit on the AC
- IC Package Type: Other
- Operating Temperature: -40 to 85 C
- Regulator Category: Switching Regulator
-
Supplier: ROHM Semiconductor GmbH
Description: resistors externally both the PFC part and the DC/DC part, IC enables power supply design free. In the PFC part, IC adopts peak current control operation. Suitable application is proposed by a various protection circuit, such as the multiplier with a revision circuit on the AC
- IC Package Type: Other
- Input Voltage (VIN): 8.5 to 24 volts
-
Supplier: Radwell International
Description: 8-BIT MULTIPLYING DIGITAL TO ANALOG CONVERTER. A LINEARITY OF 0.19% ( 1/2 LSB) IS GUARANTEED. COMPATIBLE WITH TTL AND CMOS LOGIC. STANDARD SUPPLY VOLTAGES OF VCC = +5.0 V, VEE = 5.0 V AND = 15.0 V, WIDE OUTPUT VOLTAGE RANGE: +0.5 TO 5.0 V. 16-PIN DIP. FREE 2 YEAR RADWELL
-
Supplier: Renesas Electronics Corporation
Description: capacitors are needed, for the charge pump and charge reservoir functions. The ICL7660S and ICL7660A can be connected to function as a voltage doubler and will generate up to 22.8V with a 12V input. They can also be used as a voltage multipliers or voltage dividers. Each
- IC Package Type: SOIC / SOP, Other
- Input Voltage (VIN): 1.5 to 12 volts
- Output Voltage (Volt): 1.5 to 22.8 volts
-
Supplier: Renesas Electronics Corporation
Description: The ISL97692, ISL97693, ISL97694A are Intersil’s highly integrated 4- and 6-channel LED drivers for display backlighting. These parts maximize battery life by featuring only 1mA quiescent current, and by operating down to 2.4V input voltage, with no need for higher voltage supplies
- Efficiency: 90 %
- Features: Over-Voltage Protection
- Form Factor: Integrated Circuit (IC)
- Input Voltage: 2.4 to 5.5 volts
-
Supplier: Integrated Device Technology
Description: The 843S06 is a low voltage, low skew 3.3V LVPECL Clock Synthesizer. The device targets clock distribution in SDH / SONET telecommunication systems but is well suited for a wide range of applications requiring high performance high-speed clock synthesis. The device implements a fully
- Bus Interface / Output Type: LVPECL, Other
- Features / Standards: Lead Free
- Operating Temperature: 0.0 to 70 C
- Output Frequency: 38.88 to 1244 MHz
-
Supplier: Integrated Device Technology
Description: The 8732-01 is a low voltage, low skew, 3.3V LVPECL Clock Generator. The 8732-01 has two selectable clock inputs. The CLK0 , nCLK0 pair can accept most standard differential input levels. The single ended clock input accepts LVCMOS or LVTTL input levels. The 8732-01 has a fully integrated PLL
- Bus Interface / Output Type: LVPECL, Other
- Clock Skew: 150 ps
- Device Type: Clock Generator
- Features / Standards: Lead Free
-
Supplier: Win Source Electronics
Description: PLL: Yes Divider/Multiplier: Yes/Yes Part Status: Obsolete (End Of Life) Supplier Device Package: 28-QFN (4x5) Temperature Range - Operating: -40°C ~ 105°C Manufacturer Package: 28-WFQFN Exposed Pad Popularity: Low Fake Threat In the Open Market: 60 pct
- IC Package Type: Other
- Operating Temperature: -40 to 105 C
-
Supplier: Microchip Technology, Inc.
Description: The MIC5156, MIC5157, and MIC5158 Super Low-Dropout (LDO) Regulator Controllers are single IC solutions for high-current low-dropout linear voltage regulation. Super LDO Regulators have the advantages of an external N-channel power MOSFET as the linear pass element. The MIC5156/7/8
- IC Package Type: DIP / CDIP / PDIP, SOIC / SOP, Other
- Regulator Category: Linear Regulator
-
Supplier: Radwell International
Description: IC, ANALOG MULTIPLIER, 20V/ US, TO-116-14; NO. OF MULTIPLIERS / DIVIDERS:1; NO. OF AMPLIFIERS:4; SUPPLY VOLTAGE RANGE: 8V TO18V; SLEW RATE:20V/S; DIGI. FREE 2 YEAR RADWELL WARRANTY
-
Supplier: Radwell International
Description: PRECISION IC MULTIPLIER, MONO, TO100-10, 4 MULTIPLIERS / DIVIDERS,1 AMPLIFIER, SUPPLY VOLTAGE: 8-18V, SLEW RATE:20V/US, ROHS COMPLIANT. FREE 2 YEAR RADWELL WARRANTY
Find Suppliers by Category Top
More Information Top
-
Analytical bulletin of the committee of Coordination of the Télécommunications Impériales
The multiplicateurs circuits of voltage are dtudie this article darts.
-
Analytical bulletin of the committee of Coordination of the Télécommunications of the French Union
VOLTAGE-MULTI-PLYING CIRCUITS ( Multiplicateurs circuits of voltage ).
-
Issues in validating package compact thermal models for natural convection cooled electronic systems
The desired offset voltage for the multiplier IC is obtained using the LM317 adjustable voltage regulator IC and a dip-switch array.
-
Design of an nth order Dickson voltage multiplier
Most high- voltage multiplier circuits for IC circuits are based on the circuit proposed by Schenkel in 1917 [12], which was first realized in the form of an integrated circuit by Luscher in 1972 [13] and then by Dickson [14].
-
Double and triple charge pumps with mos diodes: Dynamic models to an optimized design
Most high- voltage multiplier circuits for IC circuits,'-* also called 'charge pumps', are based on the circuit proposed by Dickson in 1976.9This circuit makes use of capacitors which are interconnected by diodes and coupled in parallel with two non-interleaving…
-
The influence of the reverse Early effect on the performance of bandgap references
“Area-efficient design of 3 and 4 stage Dickson voltage multipli- ers for power IC ,” Int. J. Circuit Theory Applicat., to he published.
-
Improved behavioral and design model of an Nth-order charge pump
, “Area-efficient design of 3 and 4 stage dickson voltage multipliers for power IC ,” Int.
-
Analytical bulletin of the committee of Coordination of the Télécommunications Impériales
-- the fonetionnement of rectifying multiplier circuits of voltage is analysed bri6ve-ment.
-
A simple chaotic and hyperchaotic time-delay system: design and electronic circuit implementation
The experimental circuit diagram shown in Fig. 12 is built using IC TL074 (quad JFET opamp), IC AD633 ( voltage multiplier chip) and a ±15 volt power supply.
-
On-chip High-Voltage Generator Design
Following some figures show applications where on-chip voltage multipliers are used in ICs .
Indicates content that may require registration and/or purchase.