-
Supplier: ThermOmegaTech®
Description: Operation A thermostatic element inside the valve senses temperature and if this falls below the setpoint, the valve modulates open to allow flow. When the temperature increases to near the setpoint, the HAT (Heat Actuated Trap) valve modulates closed. HAT valves are
- Actuation: Thermally Actuated
- Number of Ports/Ways: 2
- Pressure Rating: 300 psi
- Valve Size: 0.5000 to 0.7500 inch
-
Supplier: ThermOmegaTech®
Description: feeds” to mix your fluid to the desired specified temperature. For diverting applications, the M/D operates as a thermal bypass valve (TBV) to modulate inlet fluid temperature and divert return flow based on temperature. Benefits Self-operating – no external
- Actuation: Thermally Actuated
- Number of Ports/Ways: 3
- Pressure Rating: 350 psi
- Valve Size: 0.5000 inch
-
Supplier: ThermOmegaTech®
Description: feeds” to mix your fluid to the desired specified temperature. For diverting applications, the M/D operates as a thermal bypass valve (TBV) to modulate inlet fluid temperature and divert return flow based on temperature. Benefits Self-operating – no external
- Actuation: Thermally Actuated
- Number of Ports/Ways: 3
- Pressure Rating: 250 psi
- Valve Size: 1 inch
-
-
Supplier: ThermOmegaTech®
Description: feeds” to mix your fluid to the desired specified temperature. For diverting applications, the M/D operates as a thermal bypass valve (TBV) to modulate inlet fluid temperature and divert return flow based on temperature. Benefits Self-operating – no external
- Actuation: Thermally Actuated
- Number of Ports/Ways: 3
- Pressure Rating: 250 psi
- Valve Size: 2 inch
-
Supplier: H.O. Penn Machinery Company, Inc.
Description: valves Hydraulic oil cooler with thermal bypass Operator Station
- Scratch resistant 12.7 mm (1/2 in) tinted polycarbonate windows
- Side windows double as escape routes
- Heater
- Horsepower: 125 HP
- Operating Weight: 27000 lbs
- Type: Other
-
Supplier: H.O. Penn Machinery Company, Inc.
Description: Closed center proportional control valves Hydraulic oil cooler with thermal bypass Operator Station
- Scratch resistant 12.7 mm (1/2 in) tinted polycarbonate windows
- Side windows double as escape
- Horsepower: 174 HP
- Operating Weight: 36000 lbs
- Travel Speed: 14.48 miles/hr
- Type: Other
-
Supplier: H.O. Penn Machinery Company, Inc.
Description: valves Hydraulic oil cooler with thermal bypass Operator Station
- Scratch resistant 12.7 mm (1/2 in) tinted polycarbonate windows
- Side windows double as escape routes
- Heater
- Horsepower: 125 HP
- Operating Weight: 27000 lbs
- Type: Other
-
Supplier: H.O. Penn Machinery Company, Inc.
Description: Closed center proportional control valves Hydraulic oil cooler with thermal bypass Operator Station
- Scratch resistant 12.7 mm (1/2 in) tinted polycarbonate windows
- Side windows double as escape
- Horsepower: 173 HP
- Operating Weight: 38000 lbs
- Travel Speed: 8.08 miles/hr
- Type: Other
Find Suppliers by Category Top
Featured Products Top
-
ThermOmegaTech® specializes in temperature based control solutions. Our thermostatic thermal bypass valves automatically and precisely divert inlet flow to a heat exchanger or bypass it directly to a reservoir based solely on fluid temperature. These valves ensure accurate control of fluid (read more)
Browse Industrial Valves Datasheets for ThermOmegaTech® -
3-Way Thermal Bypass Valve (TBV) is an efficient and effective method to control avionics cooling systems. Our (read more)
Browse Control Valves Datasheets for ThermOmegaTech® -
Bonomi North America Introduces High-Pressure Ball Valves And Automated Valve Packages For Hydraulic Applications Bonomi North America is introducing a new line of high-pressure carbon steel ball valves for use in hydraulic applications. The new valves (read more)
Browse Ball Valves Datasheets for Bonomi North America, Inc. -
. Zero Leak PRI This 0.281” diameter valve is ideal for thermal relief and low flow hydraulic pressure relief applications where zero leakage is needed. Available cracking pressures range from 800 to 4700 (read more)
Browse Pressure Relief Valves Datasheets for Lee Co. (The) -
ThermOmegaTech®’s M/D temperature control valve is designed for 3-way mixing or diverting applications. For fast response, the valve is compact and low mass. ThermOmegaTech®’s valves are designed around our exclusive Thermoloid® sensor/controller that automatically and (read more)
Browse Mixing Valves Datasheets for ThermOmegaTech® -
The 281 Zero Leak PRI® is a new pressure relief insert for thermal relief and low flow hydraulic pressure relief applications where zero leakage is needed. Weighing only 6 grams, typical flow rates range from a few mL's per minute for thermal relief applications, and up to 0.5 GPM (read more)
Browse Pressure Relief Valves Datasheets for Lee Co. (The) -
accelerometers) Cloud-based application analyzes, trends, and reports the condition of critical production equipment This kit also includes everything necessary to detect internal by-pass leaks in valves and steam traps to optimize efficiency. (read more)
Browse Ultrasonic Instruments Datasheets for Wilcoxon Sensing Technologies -
ZZWP series self-operated temperature regulators use the principle of thermal expansion of liquid and incompressible liquid to achieve automatic adjustment without an auxiliary actuator. The expansion of the liquid in the temperature sensor is uniform. The self-operated temperature control valve (read more)
Browse Pressure Regulators Datasheets for Shanghai Thinktank Process Management Co., Ltd -
quickly and consistently direct hot water flow to where it is needed without any manual balancing processes. The valve will never fully close, always allowing a small bypass of flow to the return to avoid dead-heading the recirculation pump. The limited flow to your return line will reduce (read more)
Browse Tempering Valves and Thermally Actuated Valves Datasheets for ThermOmegaTech® -
From controlling jet air intakes to cooling electronics systems and managing hydraulic fluid temperature to airplane galley scald protection, ThermOmegaTech's thermostatic valves are MADE IN THE USA and trusted by NASA, Northop Grumman, Raytheon, Lockheed Martin and many premier aerospace (read more)
Browse Control Valves Datasheets for ThermOmegaTech®
More Information Top
-
Conceptual Design and Thermal-Hydraulic Characteristics of Natural Circulation Boiling Water Reactors
Thermal - hydraulic characteristics during transient (load rejection without turbine bypass valve acti- vation).
-
Conceptual Design and Safety Characteristics of a Natural-Circulation Boiling Water reactor
Thermal - hydraulic characteristics during a transient (turbine trip without turbine bypass valve acti- vation).
-
A Lumped Parameter Approach for Simulation of ICE Cooling Systems
…auxiliaries and restrictions; variable thermal-hydraulic orifice transition at specified flow number, TFVOR00: permits to control the flow direction to the by-pass / radiator branches, corresponding to the thermostatic valve closed / opened position, respectively; thermal - hydraulic volumetric flow rate sensor…
-
Measurement and modelling of forced convective heat transfer coefficient and pressure drop of Al2O3- and SiO2-water nanofluids
The experimental facility was composed of thermal - hydraulic loop with a tank with an immersed heater, a centrifugal pump, a bypass with a globe valve , an electromagnetic flow-meter, a 18 kW in-line pre-heater, a test section with band heaters…
-
Validation of Coupled Thermal-Hydraulic and Neutronics Codes for Safety Analysis by International Cooperations
Such investigations were aimed toward evaluation of the impact of the following effects and parameters: 1. thermal - hydraulic modeling issues: turbine by- pass line modeling; nodalization of vessel, steam line, and steam separator region; turbine stop valve position and steam mass flow…
-
Centrifugal fans for convective furnaces with periodic reversal of hot-gas motion
…⎯complex and unwieldy organization of the gas fluxes by means of a considerable number of regulators; ⎯considerable hydraulic and thermal losses on account of … of the connecting and bypass channels; ⎯losses of hot … leakage through the closed valves ; ⎯jamming of the valves…
-
Potential Technology to Unclog Hot Day Operational Limit
In order to operate the entire flight envelop, a typical fuel heat sink thermal system (Figure 1) is designed with a bypass valve to monitor the coking limit of the fuel … accessory system (such as engine lube oil and hydraulic oil).
-
OECD/NRC BWR Turbine Trip Transient Benchmark as a Basis for Comprehensive Qualification and Studying Best-Estimate Coupled Codes
Thermal-hydraulic modeling issues—turbine by- pass line modeling; nodalization of vessel; steam line and steam separator region; thermal - hydraulic model—number of equations; void-fraction model; steam- separator inertia; the turbine stop valve position and steam mass flow modeling; and SRVs modeling 2.
-
Super Light Water Reactors and Super Fast Reactors
…472, 476–479, 493, 497, 506, 519, 536, 537, 545–547, 549, 550, 565, 566, 575–577, 582, 585, 586 Thermal- hydraulic stability, 258, 259, 304 … 328, 331, 332, 346 Thermal power, 463, 465 Thermal … Turbine building, 572 Turbine bypass valves , 383 Turbine control, 251…
-
Energy technique
Switching-off rods are taken from below hydraulically redundant and diversitären drives fed from several pressure containers in the core. .... For safe heat dissipation in the event of the failure of the cooling depression, turbine bypass valve and blowing off valves are present that prevents the pressure build-up in the cooling circulation and serves as heat sink.