Hybrid Dataline and DC Signal Surge Suppressors
from Transtector Systems, Inc.
DC surge protector (also known as SPD or lightning protector) 1101-1099 from Transtector is a DIN-Rail style SPD that utilizes state of the art MOV, GDT technology to protect critical equipment that operates on a 48 Vdc electrical service. This surge protector provides effective protection against... [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Mounting: DIN Rail
- Application: Railroad Trackside Signal Circuits
- Surge Current: 20000
from CITEL SURGE PROTECTION
Designed to protect Power-Over-Ethernet (POE) (Mode B) network devices with transmission speeds up to 100BaseT. All eight pins are protected by a carefully designed circuit that isolates data from ethernet power lines. The ultra-sharp clamping response permanently eliminates transients from your POE... [See More]
- Technology: Gas Tubes; Hybrid; Diode
- Mounting: Attached Pole Mount Brackets for Surface or Pole Mounting
- Application: Network Applications
- Connection: RJ41, RJ45 or RJ48 Data Jacks; Screw Down Terminals
from MCG SURGE PROTECTION
MCG's rack-mount surge protectors (512H, 516H, etc.) are already internally con-. nected to the rack's metal framework. An additional ground wire is provided. for connection to the frame rack to insure continued excellent protection. [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Mounting: Wall/Panel; DIN Rail (optional feature); Device Mount; In-line or Integrally Attached
- Application: Data Acquisition; Medical Facilities; Computer Rooms
- Connection: Screw Down Terminals
from ASCO Power Technologies
Data and I/O are often overlooked as sources of problems for automation processes. Many times damaging transient can come in through the "back door" and disrupt a control system or damage a critical sensor because most industrial control hardware does not come with transient protection, it has to be... [See More]
- Technology: Gas Tubes; Hybrid; Tanzorbs, Inductors, and Resistors
- Mounting: DIN Rail
- Application: Data Acquisition; Network Applications
- Connection: Screw Down Terminals
from Surge Suppression Incorporated
"Touch Friendly" Terminal Strip Connected Data Transmission Line Protection - UL497B Listed [See More]
- Technology: Hybrid; Up to 100Mbs
- Mounting: DIN Rail (optional feature); Device Mount; In-line or Integrally Attached; "Touch Friendly" Enclosure
- Application: Data Acquisition; Network Applications
- Connection: Screw Down Terminals
from Transtector Systems, Inc.
DC surge protector (also known as SPD or lightning protector) 1101-1157 from Transtector is a DIN-Rail style SPD that utilizes state of the art MOV, GDT technology to protect critical equipment that operates on a 48 Vdc electrical service. This surge protector provides effective protection against... [See More]
- Technology: Metal Oxide Varistor; Gas Tubes; Hybrid
- Mounting: DIN Rail
- Application: Telecom. Applications; Computer Rooms; Industrial Automation, Controls & Sense Loops, Wastewater Treatment, Rail, Oil & Gas, LED Lighting
- Surge Current: 20000
from CITEL SURGE PROTECTION
Designed to protect Power-Over-Ethernet (POE) (Mode B) network devices with transmission speeds up to 100BaseT. All eight pins are protected by a carefully designed circuit that isolates data from ethernet power lines. The ultra-sharp clamping response permanently eliminates transients from your POE... [See More]
- Technology: Gas Tubes; Hybrid
- Mounting: DIN Rail
- Application: Network Applications
- Connection: RJ41, RJ45 or RJ48 Data Jacks
from MCG SURGE PROTECTION
The DLP H & HH series provides superior surge protection for data and signal line applications. Using higher capacity components, these units offer an improved level of reliability than other similarly priced products. To cover a broader range of applications, four different styles of protection... [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Mounting: Wall/Panel; Device Mount; In-line or Integrally Attached
- Application: Data Acquisition; Network Applications; Telecom. Applications; Audio & Video Applications; Medical Facilities; Computer Rooms; PLC I/O Ports, 4-20mA loops
- Connection: Screw Down Terminals; 0
from ASCO Power Technologies
Advanced Protection Technologies (APT) has been a worldwide leader in the surge suppression industry since 1985. APT ’s surge protection products have long set the standard for protection of commercial & industrial facilities. surgeassure ™ was formed to bring this same level of... [See More]
- Technology: Hybrid
- Mounting: Wall/Panel
- Application: Data Acquisition; Network Applications
- Connection: Screw Down Terminals
from Surge Suppression Incorporated
Coax Type Protection Series - UL497B Listed [See More]
- Technology: Hybrid
- Mounting: Device Mount; In-line or Integrally Attached; "BNC" Type Connector In/Out
- Application: Data Acquisition; Network Applications; Audio & Video Applications
- Connection: Coaxial Cable Connectors (BNC, F Type etc.)
from Transtector Systems, Inc.
DC surge protector (also known as SPD or lightning protector) 1101-707 from Transtector is an AAR terminal style SPD that utilizes state of the art SASD, GDT technology to protect critical equipment that operates on a 12 Vdc electrical service. This surge protector provides effective protection... [See More]
- Technology: Silicon Avalanche Diode; Hybrid
- Mounting: AAR Terminal Mount
- Application: Telecom. Applications; Computer Rooms; Industrial Automation, Controls & Sense Loops, Wastewater Treatment, Rail, Oil & Gas, LED Lighting
- Surge Current: 20000
from CITEL SURGE PROTECTION
B180, B280 & B480 series wall mountable surge protectors have been designed to protect your sensitive telephone, datacom and instrumentation equipment against harmful lightning surges and electrical transients. [See More]
- Technology: Gas Tubes; Hybrid; Diode
- Mounting: Wall/Panel
- Application: Network Applications; Telecom. Applications
- Connection: Screw Down Terminals
from MCG SURGE PROTECTION
MCG's rack-mount surge protectors (512H, 516H, etc.) are already internally con-. nected to the rack's metal framework. An additional ground wire is provided. for connection to the frame rack to insure continued excellent protection. [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Connection: Screw Down Terminals
- Mounting: Wall/Panel; Device Mount; In-line or Integrally Attached
from Surge Suppression Incorporated
Compact DIN Rail mountable [See More]
- Technology: Hybrid; Up to 2Mbs
- Mounting: DIN Rail; Device Mount; In-line or Integrally Attached
- Application: Data Acquisition; Network Applications
- Connection: Screw Down Terminals; Detachable Terminal Strip
from Transtector Systems, Inc.
DC surge protector (also known as SPD or lightning protector) 1101-1082 from Transtector is an AAR terminal style SPD that utilizes state of the art SASD, GDT technology to protect critical equipment that operates on a 14 Vdc electrical service. This surge protector provides effective protection... [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Mounting: AAR Terminal Mount
- Application: Telecom. Applications; Computer Rooms; Industrial Automation, Controls & Sense Loops, Wastewater Treatment, Rail, Oil & Gas, LED Lighting
- Surge Current: 20000
from CITEL SURGE PROTECTION
The E280 concept is based on the use of plug-in modules to protect. telecom and data lines. The E280 line covers all multi-line telephone. (PBX) and data installation configurations: there is an E280 module that is suitable to support for every type data line and/or ac power line to 220Vac. [See More]
- Technology: Gas Tubes; Hybrid; Diode
- Mounting: Wall/Panel
- Application: Network Applications; Telecom. Applications
- Connection: Brass Male Pin
from MCG SURGE PROTECTION
The DLP-10G/20G/30G Series are triple-stage hybrid surge protectors that combine brute force primary protection. with high speed silicon Avalanche diode stages for rigorous transient clamping. This series guards mainframes, process controllers and other complex instrumentation from damage due to... [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Connection: Screw Down Terminals
- Mounting: Wall/Panel; Device Mount; In-line or Integrally Attached
from Surge Suppression Incorporated
Conduit Style 4-20mA Current Loop Protection Series - UL497B Listed [See More]
- Technology: Hybrid
- Mounting: Device Mount; In-line or Integrally Attached; 3/4to1/2" Conduit, Wires In/Out Opp Ends
- Application: Data Acquisition; Network Applications
- Connection: Wired
from Transtector Systems, Inc.
DC surge protector (also known as SPD or lightning protector) 1101-764 from Transtector is an AAR terminal style SPD that utilizes state of the art SASD, GDT technology to protect critical equipment that operates on a 90 Vdc electrical service. This surge protector provides effective protection... [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Mounting: AAR Terminal Mount
- Application: Railroad Circuit
- Surge Current: 20000
from CITEL SURGE PROTECTION
CITEL's IS-CSL series is a rugged din rail surge protector designed to protect your sensitive PLC I/O signals & other instrumentation equipment from harmful lightning surges and electrical transients in Harzardous environments. It combines a fast response time & high power handling... [See More]
- Technology: Metal Oxide Varistor; Gas Tubes; Hybrid; Diode Network
- Mounting: DIN Rail
- Application: Network Applications
- Operating Temp: -4 to 104
from MCG SURGE PROTECTION
MCG ’s DLP-25 series is designed to protect critical control circuits from lightning induced transients. The DLP-25 series comes in three offerings – light duty, standard duty, and heavy duty and protects up to five wires. The DLP-25 uses a compact aluminum DIN rail mount enclosure. If a... [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Connection: Screw Down Terminals
- Mounting: Wall/Panel; DIN Rail; Device Mount; In-line or Integrally Attached
from Surge Suppression Incorporated
Individual Circuit Protection Series 2 [See More]
- Technology: Hybrid
- Mounting: DIN Rail (optional feature); Device Mount; In-line or Integrally Attached
- Application: Audio & Video Applications; Computer Rooms
- Connection: Screw Down Terminals (optional feature); Wired
from MCG SURGE PROTECTION
The DLP-10G/20G/30G Series are triple-stage hybrid surge protectors that combine brute force primary protection. with high speed silicon Avalanche diode stages for rigorous transient clamping. This series guards mainframes, process controllers and other complex instrumentation from damage due to... [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Connection: Screw Down Terminals
- Mounting: Wall/Panel; Device Mount; In-line or Integrally Attached
from Surge Suppression Incorporated
Security System Protection Products - UL497B Listed [See More]
- Technology: Hybrid
- Mounting: DIN Rail (optional feature); Device Mount; In-line or Integrally Attached; 1 BNC Pair In/Out, 4 Data, 2 Power
- Application: Data Acquisition; Network Applications; Audio & Video Applications
- Connection: Screw Down Terminals; Coaxial Cable Connectors (BNC, F Type etc.)
from MCG SURGE PROTECTION
MCG's rack-mount surge protectors (512H, 516H, etc.) are already internally con-. nected to the rack's metal framework. An additional ground wire is provided. for connection to the frame rack to insure continued excellent protection. [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Mounting: Wall/Panel; Device Mount; In-line or Integrally Attached; Plug-in
- Application: Data Acquisition; Network Applications; Telecom. Applications; Medical Facilities; Computer Rooms
- Connection: RJ21X
from MCG SURGE PROTECTION
MCG's rack-mount surge protectors (512H, 516H, etc.) are already internally con-. nected to the rack's metal framework. An additional ground wire is provided. for connection to the frame rack to insure continued excellent protection. [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Mounting: Wall/Panel; Device Mount; In-line or Integrally Attached; Plug-in
- Application: Data Acquisition; Network Applications; Telecom. Applications; Medical Facilities; Computer Rooms
- Connection: Screw Down Terminals; Terminal Blocks or Punch down
from MCG SURGE PROTECTION
MCG's rack-mount surge protectors (512H, 516H, etc.) are already internally con-. nected to the rack's metal framework. An additional ground wire is provided. for connection to the frame rack to insure continued excellent protection. [See More]
- Technology: Silicon Avalanche Diode; Gas Tubes; Hybrid
- Connection: RJ11, RJ13 or RJ14 Phone Jacks
- Mounting: Wall/Panel; Device Mount; In-line or Integrally Attached
from MCG SURGE PROTECTION
MCG's rack-mount surge protectors (512H, 516H, etc.) are already internally con-. nected to the rack's metal framework. An additional ground wire is provided. for connection to the frame rack to insure continued excellent protection. [See More]
- Technology: Silicon Avalanche Diode; Silicon Thyristor Diode; Hybrid
- Mounting: Wall/Panel; DIN Rail (optional feature); In-line or Integrally Attached
- Application: Telecom. Applications; Medical Facilities; Computer Rooms
- Connection: RJ11, RJ13 or RJ14 Phone Jacks
from MCG SURGE PROTECTION
MCG's rack-mount surge protectors (512H, 516H, etc.) are already internally con-. nected to the rack's metal framework. An additional ground wire is provided. for connection to the frame rack to insure continued excellent protection. [See More]
- Technology: Silicon Avalanche Diode; Silicon Thyristor Diode; Hybrid
- Connection: RJ41, RJ45 or RJ48 Data Jacks
- Mounting: In-line or Integrally Attached; Rack
from MCG SURGE PROTECTION
MCG's rack-mount surge protectors (512H, 516H, etc.) are already internally con-. nected to the rack's metal framework. An additional ground wire is provided. for connection to the frame rack to insure continued excellent protection. [See More]
- Technology: Silicon Avalanche Diode; Silicon Thyristor Diode; Hybrid
- Connection: RJ41, RJ45 or RJ48 Data Jacks
- Mounting: In-line or Integrally Attached; Rack
from MCG SURGE PROTECTION
MCG's rack-mount surge protectors (512H, 516H, etc.) are already internally con-. nected to the rack's metal framework. An additional ground wire is provided. for connection to the frame rack to insure continued excellent protection. [See More]
- Technology: Silicon Avalanche Diode; Silicon Thyristor Diode; Hybrid
- Connection: RJ41, RJ45 or RJ48 Data Jacks
- Mounting: In-line or Integrally Attached; Rack