Reinforced Hydraulic Hose
from Kuriyama of America, Inc.
One and two wire braid reinforced hydraulic hose with MINETUFF Cover - AT3KMT. AT3KMT - One or two wire braid. Meets or exceeds the working and burst pressure requirements of SAE 100 R17. Meets or exceeds EN 857 1SC (sizes 04 and 06). MSHA IC-152/18 approved flame resistance. 1 wire braid up thru... [See More]
- Product Form: Hose
- O.D.: 0.470
- I.D.: 0.250
- Minimum Bend Radius: 2
from NewAge Performance Products | NAPP
Phthalate-, DEHP- and BPA-free. REACH and RoHS compliant. Glass-like clarity lets users see fluid flow. Open mesh polyester braiding permanently encapsulated in walls of clear, flexible PVC tubing. Raw materials meet California Proposition 65. Listed with NSF-51 for food and beverage equipment... [See More]
- Product Form: Hose
- O.D.: 0.315
- I.D.: 0.125
- Working Pressure: 465
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.520
- I.D.: 0.264
- Minimum Bend Radius: 4
from RS Components, Ltd.
Hydraulic Hose, 262 mm L x 1/4in ID [See More]
- Product Form: Assembly
- Working Pressure: 5802
- I.D.: 0.250
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
Textile-reinforced hydraulic hose with one braid - TR6. Low pressure hydraulic lines, fuel oil, antifreeze solutions, air and water. Excellent for hydraulic return line hose where high temperatures are encountered for air or gas applications above 1.7 MPa (250 psi); the cover should be pin-pricked. [See More]
- Product Form: Hose
- O.D.: 0.500
- I.D.: 0.250
- Minimum Bend Radius: 3
from NewAge Performance Products | NAPP
A blend of nitrile rubber and PVC reinforced with polyester. Specially designed for use with Push-On style barbed fittings which eliminate the need for clamps. Non-marking cover, resistant to U.V., ozone, and abrasion. Electrically non-conductive. Offers cold temperature flexibility. Well suited for... [See More]
- Product Form: Hose
- O.D.: 0.500
- I.D.: 0.260
- Minimum Bend Radius: 2
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.520
- I.D.: 0.264
- Minimum Bend Radius: 4
from RS Components, Ltd.
Hydraulic Hose, 362 mm L x 1/4in ID [See More]
- Product Form: Assembly
- Working Pressure: 5802
- I.D.: 0.250
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
Textile-reinforced hydraulic hose with two braids - TR3. Medium pressure hydraulic lines, fuel oil, antifreeze solutions, air and water. Not recommended for diver air hose. For air or gas applications above 1.7 MPa (250 PSI); the cover should be pin-pricked. MSHA accepted cover available on request. [See More]
- Product Form: Hose
- O.D.: 0.570
- I.D.: 0.250
- Minimum Bend Radius: 2
from NewAge Performance Products | NAPP
Open mesh polyester braiding incorporated within the wall of flexible, ether-based polyurethane. Made from non-toxic raw ingredients conforming to FDA standards. Resin is listed by the National Sanitation Foundation (NSF 61) for use with potable water. Offers much greater pressure capability than... [See More]
- Product Form: Hose
- O.D.: 0.470
- I.D.: 0.250
- Minimum Bend Radius: 1
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.590
- I.D.: 0.323
- Minimum Bend Radius: 5
from RS Components, Ltd.
Hydraulic Hose, 562 mm L x 1/4in ID [See More]
- Product Form: Assembly
- Working Pressure: 5802
- I.D.: 0.250
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
Textile-reinforced hydraulic hose with one braid – T2TE. Halogen-Free Compound. T2TE – One High Tensile Textile Braids. Meets or exceeds EN 854 2TE. Medium pressure hydraulic lines, fuel oil, antifreeze solutions, air and water. Excellent for hydraulic return line hose where high... [See More]
- Product Form: Hose
- O.D.: 1.350
- I.D.: 1.000
- Minimum Bend Radius: 6
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.590
- I.D.: 0.323
- Minimum Bend Radius: 5
from RS Components, Ltd.
Hydraulic Hose, 762 mm L x 1/4in ID [See More]
- Product Form: Assembly
- Working Pressure: 5802
- I.D.: 0.250
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
TR4XF - Extra Flexible SAE 100 R4 Oil Return Hose. T634AA - Textile reinforced with four spiral wire helix to prevent collapsing. Low pressure return lines or suction lines with half the bend radius requirements of SAE J517 100R4, service with petroleum based hydraulic fluids, water-glycol and... [See More]
- Product Form: Hose
- O.D.: 1.930
- I.D.: 1.500
- Minimum Bend Radius: 3
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.673
- I.D.: 0.382
- Minimum Bend Radius: 5
from RS Components, Ltd.
Hydraulic Hose, 962 mm L x 1/4in ID [See More]
- Product Form: Assembly
- Working Pressure: 5802
- I.D.: 0.250
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
Made in the USA. Meets or exceeds SAE J517 & J343 Standards. Tested at 1/2 the bend radius under SAE J517 100R7 Standards. Exceeds SAE100R7 impulse requirements. Light weight and flexible. Improved cold temperature flexibility. A special copolyester inner tube and cover provides superior low... [See More]
- Product Form: Hose
- O.D.: 0.834
- I.D.: 0.500
- Minimum Bend Radius: 3
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.673
- I.D.: 0.382
- Minimum Bend Radius: 5
from RS Components, Ltd.
Hydraulic Hose, 1162 mm L x 1/4in ID [See More]
- Product Form: Assembly
- Working Pressure: 5802
- I.D.: 0.250
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
Made in the USA. Slither ® Cover - Slick, Slither cover helps hose slide through tight spaces such as sheaves, pulleys and bundles. Especially helpful routing through long lengths of hose bundles on aerial equipment such as scissor lifts and bucket trucks. Abrasion Resistant - Polyurethane... [See More]
- Product Form: Hose
- O.D.: 0.834
- I.D.: 0.500
- Minimum Bend Radius: 3
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.807
- I.D.: 0.516
- Minimum Bend Radius: 7
from RS Components, Ltd.
Hydraulic Hose, 1462 mm L x 1/4in ID [See More]
- Product Form: Assembly
- Working Pressure: 5802
- I.D.: 0.250
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
Made in the USA. Slither ® Cover - Slick, Slither cover helps hose slide through tight spaces such as sheaves, pulleys and bundles. Especially helpful routing through long lengths of hose bundles on aerial equipment such as scissor lifts and bucket trucks. Abrasion Resistant - Polyurethane... [See More]
- Product Form: Hose
- O.D.: 0.834
- I.D.: 0.500
- Minimum Bend Radius: 3
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.807
- I.D.: 0.516
- Minimum Bend Radius: 7
from RS Components, Ltd.
Hydraulic Hose, 1762 mm L x 1/4in ID [See More]
- Product Form: Assembly
- Working Pressure: 5802
- I.D.: 0.250
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
Made in the USA. Isobaric - Consistent 3,000 PSI working pressure regardless of hose size. Eliminates user risk of hose misapplication within a given pressure system. Abrasion Resistant - Polyurethane cover outlasts rubber versions in applications where the hose rubs against abrasive surfaces. [See More]
- Product Form: Hose
- O.D.: 0.834
- I.D.: 0.500
- Minimum Bend Radius: 3
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.933
- I.D.: 0.642
- Minimum Bend Radius: 8
from RS Components, Ltd.
Hydraulic Hose, 1962 mm L x 1/4in ID [See More]
- Product Form: Assembly
- Working Pressure: 5802
- I.D.: 0.250
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
Made in the USA. Isobaric - Consistent 3,000 PSI working pressure regardless of hose size. Eliminates user risk of hose misapplication within a given pressure system. Abrasion Resistant - Polyurethane cover outlasts rubber versions in applications where the hose rubs against abrasive surfaces. [See More]
- Product Form: Hose
- O.D.: 0.834
- I.D.: 0.500
- Minimum Bend Radius: 3
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.933
- I.D.: 0.642
- Minimum Bend Radius: 8
from RS Components, Ltd.
Hydraulic Hose, 258 mm L x 3/8in ID [See More]
- Product Form: Assembly
- Working Pressure: 4786
- I.D.: 0.375
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
Made in the USA. Slither ® Cover - Slick, Slither cover helps hose slide through tight spaces such as sheaves, pulleys and bundles. Especially helpful routing through long lengths of hose bundles on aerial equipment such as scissor lifts and bucket trucks. Abrasion Resistant - Polyurethane... [See More]
- Product Form: Hose
- O.D.: 0.820
- I.D.: 0.500
- Minimum Bend Radius: 4
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 1.098
- I.D.: 0.764
- Minimum Bend Radius: 9
from RS Components, Ltd.
Hydraulic Hose, 358 mm L x 3/8in ID [See More]
- Product Form: Assembly
- Working Pressure: 4786
- I.D.: 0.375
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
Made in the USA. Slither ® Cover - Slick, Slither cover helps hose slide through tight spaces such as sheaves, pulleys and bundles. Especially helpful routing through long lengths of hose bundles on aerial equipment such as scissor lifts and bucket trucks. Abrasion Resistant - Polyurethane... [See More]
- Product Form: Hose
- O.D.: 0.820
- I.D.: 0.500
- Minimum Bend Radius: 4
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 1.098
- I.D.: 0.764
- Minimum Bend Radius: 9
from RS Components, Ltd.
Hydraulic Hose, 458 mm L x 3/8in ID [See More]
- Product Form: Assembly
- Working Pressure: 4786
- I.D.: 0.375
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Kuriyama of America, Inc.
Made in the USA. Slither ® Cover - Slick, Slither cover helps hose slide through tight spaces such as sheaves, pulleys and bundles. Especially helpful routing through long lengths of hose bundles on aerial equipment such as scissor lifts and bucket trucks. Abrasion Resistant - Polyurethane... [See More]
- Product Form: Hose
- O.D.: 0.834
- I.D.: 0.500
- Minimum Bend Radius: 3
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 1.390
- I.D.: 1.016
- Minimum Bend Radius: 12
from RS Components, Ltd.
Hydraulic Hose, 558 mm L x 3/8in ID [See More]
- Product Form: Assembly
- Working Pressure: 4786
- I.D.: 0.375
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 1.390
- I.D.: 1.016
- Minimum Bend Radius: 12
from RS Components, Ltd.
Hydraulic Hose, 658 mm L x 3/8in ID [See More]
- Product Form: Assembly
- Working Pressure: 4786
- I.D.: 0.375
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 1.705
- I.D.: 1.260
- Minimum Bend Radius: 17
from RS Components, Ltd.
Hydraulic Hose, 758 mm L x 3/8in ID [See More]
- Product Form: Assembly
- Working Pressure: 4786
- I.D.: 0.375
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 1.965
- I.D.: 1.508
- Minimum Bend Radius: 20
from RS Components, Ltd.
Hydraulic Hose, 858 mm L x 3/8in ID [See More]
- Product Form: Assembly
- Working Pressure: 4786
- I.D.: 0.375
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 2.492
- I.D.: 2.016
- Minimum Bend Radius: 25
from RS Components, Ltd.
Hydraulic Hose, 958 mm L x 3/8in ID [See More]
- Product Form: Assembly
- Working Pressure: 4786
- I.D.: 0.375
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 2.992
- I.D.: 2.539
- Minimum Bend Radius: 31
from RS Components, Ltd.
Hydraulic Hose, 1158 mm L x 3/8in ID [See More]
- Product Form: Assembly
- Working Pressure: 4786
- I.D.: 0.375
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.591
- I.D.: 0.264
- Minimum Bend Radius: 4
from RS Components, Ltd.
Hydraulic Hose, 1958 mm L x 3/8in ID [See More]
- Product Form: Assembly
- Working Pressure: 4786
- I.D.: 0.375
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.591
- I.D.: 0.264
- Minimum Bend Radius: 4
from RS Components, Ltd.
Hydraulic Hose, 456 mm L x 1/2in ID [See More]
- Product Form: Assembly
- Working Pressure: 3989
- I.D.: 0.500
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.646
- I.D.: 0.323
- Minimum Bend Radius: 5
from RS Components, Ltd.
Hydraulic Hose, 556 mm L x 1/2in ID [See More]
- Product Form: Assembly
- Working Pressure: 3989
- I.D.: 0.500
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.646
- I.D.: 0.323
- Minimum Bend Radius: 5
from RS Components, Ltd.
Hydraulic Hose, 656 mm L x 1/2in ID [See More]
- Product Form: Assembly
- Working Pressure: 3989
- I.D.: 0.500
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.740
- I.D.: 0.382
- Minimum Bend Radius: 5
from RS Components, Ltd.
Hydraulic Hose, 756 mm L x 1/2in ID [See More]
- Product Form: Assembly
- Working Pressure: 3989
- I.D.: 0.500
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.740
- I.D.: 0.382
- Minimum Bend Radius: 5
from RS Components, Ltd.
Hydraulic Hose, 956 mm L x 1/2in ID [See More]
- Product Form: Assembly
- Working Pressure: 3989
- I.D.: 0.500
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Ningbo TIP Fluid Technology Co., Ltd.
High-performance hydraulic rubber hose Our high-performance hydraulic rubber hose is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving machineries. Designed with advanced technology and robust materials, this hose ensures superior performance. [See More]
- Product Form: Hose
- O.D.: 0.862
- I.D.: 0.516
- Minimum Bend Radius: 7
from RS Components, Ltd.
Hydraulic Hose, 1156 mm L x 1/2in ID [See More]
- Product Form: Assembly
- Working Pressure: 3989
- I.D.: 0.500
- Material: Synthetic Rubber; Synthetic Rubber; Elastomers
from Utility Parts Central, Inc.
Greenlee Fairmont Specifications: â € ¢ Hose Length: 8' and 10' lengths. â € ¢ Hose Diameter: 3/8". â € ¢ Working Pressure: 2250 psi (155 bar). Greenlee Fairmont hoses Includes: â € ¢ (2) 3/8" x 8' (10 mm x 2.4 m) I.D. Hoses with... [See More]
- Product Form: Assembly
- Working Pressure: 2250
- I.D.: 0.375
- Material: Synthetic Rubber; Elastomers
from Anchor Coupling, Inc.
MSHA approved cover, DIN 20023-4SP [See More]
- Product Form: Hose; Assembly (optional feature)
- O.D.: ? to 0.840
- I.D.: 0.375
- Minimum Bend Radius: 7 to ?
from Carr Lane Manufacturing Co.
This exclusive small-diameter high-pressure hydraulic hose is especially designed for workholding applications. Can be used for flexible connections, or for rigid connections as an alternative to tubing. Easy to fit into tight spots, with a 1-5/8" minimum bend radius. Braided steel covering protects... [See More]
- Product Form: Hose; Assembly (optional feature)
- Minimum Bend Radius: 2
- I.D.: 0.156
- Working Pressure: 7500
from Carr Lane Manufacturing Co.
Heavy-Duty Hose is ideal for long, flexible hydraulic connections, such as the line from a power source to a fixture. This high-pressure hose is reinforced with four plies of high-tensile wire for remarkably little expansion under pressure (fluid required due to expansion is only .066 cu.in. per... [See More]
- Product Form: Hose; Assembly (optional feature)
- Minimum Bend Radius: 5
- I.D.: 0.250
- Working Pressure: 7500