Sine Wave Vibration Shock and Vibration Testing Shakers
from ECON Technologies Co.,Ltd
ECON supply multi-axial/multi-DOF vibration system, such as bi-axial shaker and tri-axial shaker, which can reproduce more realistic vibration conditions than traditional uniaxial shaker. It could hightly reduce the rate of over test or lack of test during complex tests. In addition, test results... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 11038
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 30.07
from ECON Technologies Co.,Ltd
ECON supply multi-axial/multi-DOF vibration system, such as bi-axial shaker and tri-axial shaker, which can reproduce more realistic vibration conditions than traditional uniaxial shaker. It could hightly reduce the rate of over test or lack of test during complex tests. In addition, test results... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 1322
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 15.29
from ECON Technologies Co.,Ltd
ECON supply multi-axial/multi-DOF vibration system, such as bi-axial shaker and tri-axial shaker, which can reproduce more realistic vibration conditions than traditional uniaxial shaker. It could hightly reduce the rate of over test or lack of test during complex tests. In addition, test results... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 2203
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 19.98
from ECON Technologies Co.,Ltd
ECON introduces a new electro-dynamic vibration Test system with a wide frequency range, excellent index, high reliability, small footprint, convenient movement, simple operation and many other advantages. Based on the advanced closed-loop single-axis or multiaxis vibration controller, the shaker... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 1349
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 100
from ECON Technologies Co.,Ltd
EDM series Electro- Dynamic Shaker have features of wide frequency range, excellent index, high reliability, simple operation and maintenance friendly. There are various models and specifications available for this series. The exciting force range is from 10kN to 50kN, and the Max. load is from... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 2248
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 100
from ECON Technologies Co.,Ltd
EDM series Electro- Dynamic Shaker have features of wide frequency range, excellent index, high reliability, simple operation and maintenance friendly. There are various models and specifications available for this series. The exciting force range is from 10kN to 50kN, and the Max. load is from... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 4496
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 100
from ECON Technologies Co.,Ltd
EDM series Electro- Dynamic Shaker have features of wide frequency range, excellent index, high reliability, simple operation and maintenance friendly. There are various models and specifications available for this series. The exciting force range is from 10kN to 50kN, and the Max. load is from... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 7194
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 100
from ECON Technologies Co.,Ltd
EDM-LS series electro-dynamic vibration test system is suitable for vibration test requirements with long stroke. The frequency range of this series is 1-2500Hz, Max. acceleration up to 800m/s ² (no-load), and Max. speed up to 1.8m/s. The system is mainly used in aerospace, transportation and... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 6744
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 76.45
from ECON Technologies Co.,Ltd
EDM series Electro- Dynamic Shaker have features of wide frequency range, excellent index, high reliability, simple operation and maintenance friendly. There are various models and specifications available for this series. The exciting force range is from 10kN to 50kN, and the Max. load is from... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 7194
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 100
from ECON Technologies Co.,Ltd
EDM-LS series electro-dynamic vibration test system is suitable for vibration test requirements with long stroke. The frequency range of this series is 1-2500Hz, Max. acceleration up to 800m/s ² (no-load), and Max. speed up to 1.8m/s. The system is mainly used in aerospace, transportation and... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 11240
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 81.55
from ECON Technologies Co.,Ltd
EDM series Electro- Dynamic Shaker have features of wide frequency range, excellent index, high reliability, simple operation and maintenance friendly. There are various models and specifications available for this series. The exciting force range is from 10kN to 50kN, and the Max. load is from... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 11240
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 100
from ECON Technologies Co.,Ltd
EDM series Electro- Dynamic Shaker have features of wide frequency range, excellent index, high reliability, simple operation and maintenance friendly. There are various models and specifications available for this series. The exciting force range is from 10kN to 50kN, and the Max. load is from... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 12139
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 100
from ECON Technologies Co.,Ltd
ECON introduces a new electro-dynamic vibration Test system with a wide frequency range, excellent index, high reliability, small footprint, convenient movement, simple operation and many other advantages. Based on the advanced closed-loop single-axis or multiaxis vibration controller, the shaker... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 674
- Applications: R&D or product design verification; Product qualification; Reliability testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Peak Acceleration: 0.0 to 100
from ECON Technologies Co.,Ltd
VE series Miniature shaker is a high precision, high reliability and wide frequency band vibration equipment developed by ECON on the basis of accumulated years of vibration control technology. The frequency range is 2Hz-10,000Hz, and the force range is 20N-1,000N. [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 4.5
- Applications: Accelerometer or sensor calibration; R&D or product design verification; Product qualification; Reliability testing; Semiconductor component testing; Seismic vibration simulation; Structural fatigue testing
- Peak Acceleration: 0.0 to 20.39
from ECON Technologies Co.,Ltd
VE series Miniature shaker is a high precision, high reliability and wide frequency band vibration equipment developed by ECON on the basis of accumulated years of vibration control technology. The frequency range is 2Hz-10,000Hz, and the force range is 20N-1,000N. [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 0.0 to 22.48
- Applications: Accelerometer or sensor calibration; R&D or product design verification; Product qualification; Reliability testing; Semiconductor component testing; Seismic vibration simulation; Structural fatigue testing
- Peak Acceleration: 0.0 to 40.77
from Thermotron Industries
Thermotron Electrodynamic Large Force Shakers accurately simulate a wide range of conditions that help improve product and test quality and reliability. A Thermotron Vibration Shaker can test in a vertical or horizontal orientation; utilize a fixture, sliptable, or head expander; and interface with... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing; Classical Shock, Resonant Search & Dwell
- Peak Sine force: 12000
- Applications: Mechanical impedance testing; R&D or product design verification; Product qualification; Reliability testing; Semiconductor component testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation; Mission Profile, ESS
- Random Force - RMS: 12000
from Spectral Dynamics, Inc.
SD-11000-17/DA-50. High Force Vibration System Series. Typical System Application. The Model SD-11000-17 Series Vibration test system is a versatile wide frequency band electrodynamics vibration test system. It is designed to test from small to medium sized payload such as electronic assemblies and... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 11025
- Applications: Product qualification; Electronic Assemblies, Automotive, Aviation, Military, Medical, and Electronic Manufacturing Industries
- Random Force - RMS: 11025
from AI SI LI (China) Test Equipment Co., Ltd.
3 Axis High Frequency Electromagnetic Vibration Shaker is widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries. This type of equipment is used for discovering the early faults, simulating the actual working condition and the... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 674 to 35968
- Applications: Accelerometer or sensor calibration; Mechanical impedance testing; R&D or product design verification; Product qualification; Reliability testing; Semiconductor component testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Random Force - RMS: 674 to 35968
from Spectral Dynamics, Inc.
The M1600W Modal Shaker. The Model M1600W Modal Shaker is a small permanent magnet vibration exciter, stably constructed and easy to transport. It is intended primarily for Modal excitation, but of course can be used for transducer calibration, experimental or educational use. Its frequency range up... [See More]
- Test Modes: Random vibration mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 44.96
- Applications: Modal excitation source; Transducer Calibration
- Random Force - RMS: 31.47
from AI SI LI (China) Test Equipment Co., Ltd.
Electromagnetic vibration table is widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries. This type of equipment is used for discovering the early faults, simulating the actual working condition and the structure strength test,... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 674 to 6744
- Applications: Accelerometer or sensor calibration; Mechanical impedance testing; R&D or product design verification; Product qualification; Reliability testing; Semiconductor component testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Random Force - RMS: 674 to 6744
from Spectral Dynamics, Inc.
SD-8360LS4-17/DA-60. The Model SD-8360LS4-17 Series Vibration test system is a versatile wide frequency band Electrodynamic Vibration Test system. It is designed to test from small to medium sized payload such as electronic assemblies and design features meet the testing requirements of the... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 8379
- Applications: Product qualification; Electronic Assemblies, Automotive, Aviation, Military, Medical, and Electronic Manufacturing Industries
- Random Force - RMS: 8379
from AI SI LI (China) Test Equipment Co., Ltd.
electromagnetic vibration testing machine is dedicated to high quality, high performance and high reliability, precision and accuracy, and convenient operation. It is a test platform that meets all kinds of test specifications, and can be executed including IEC, MIL-STD, JIS, ASTM and other... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 674 to 35968
- Applications: Accelerometer or sensor calibration; Mechanical impedance testing; R&D or product design verification; Product qualification; Reliability testing; Semiconductor component testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Random Force - RMS: 674 to 35968
from Spectral Dynamics, Inc.
SD B Series Pneumatic Shock and Bump Machine. The Bump (SD B) Series Machines are used to simulate and evaluate the design and destructive testing of components, circuits, hybrids, and complete assemblies as it pertains to bump. There are 7 standard bump machine test systems available or we can also... [See More]
- Test Modes: Shock mode testing; Sinusoidal mode vibration testing
- Peak Acceleration: 2 to 120
- Applications: Semiconductor component testing; Transportation or automotive vibration and shock simulation; Military, Industrial, and Individual Test Requirements
- Displacement: 0.0 to 4.72
from AI SI LI (China) Test Equipment Co., Ltd.
Electrodynamic Vibration Shaker , adopted the 'double-magnetic circuit structure',' self-generated skeleton action circles', 'Airborne Support ’ and 'roller bearings and linear guidance', 'trunnion isolation ’ advanced modern technology and special technology, can be completed in X,Y,Z... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 674 to 35968
- Applications: Accelerometer or sensor calibration; Mechanical impedance testing; R&D or product design verification; Product qualification; Reliability testing; Semiconductor component testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Random Force - RMS: 674 to 35968
from Spectral Dynamics, Inc.
SD-17600-19/DA-80. Water Cooled Shaker Series. FEATURES. Water Cooled. 17,600 lbf (8,000 kgf) Sine Force. 17,600 lbf (8,000 kgf) Random Force. 2 Inches (51 mm) Peak to Peak displacement. Large diameter, lightweight armature. Double Field Coils (Upper and Lower) design. Ultra-Compact energy... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 17640
- Applications: Product qualification; Transportation or automotive vibration and shock simulation; Spacecraft Components, Large Mechanical Structures, Automotive Systems, Military Products
- Random Force - RMS: 17640
from AI SI LI (China) Test Equipment Co., Ltd.
Large Force Electro Dynamic Vibration Shaker adopted the double- magnetic circuit structure, self-generated skeleton action circles, Airborne Support and roller bearings and linear guidance, trunnion isolation advanced modern technology and special technology, can be completed in X,Y,Z three-axis... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 674 to 35968
- Applications: Accelerometer or sensor calibration; Mechanical impedance testing; R&D or product design verification; Product qualification; Reliability testing; Semiconductor component testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Random Force - RMS: 674 to 35968
from Spectral Dynamics, Inc.
SD-22000-19/DA-100. Water Cooled Shaker Series. FEATURES. Water Cooled. 22,000 lbf (10,000 kgf ) Sine Force. 22,000 lbf (10,000 kgf) Random Force. 2 Inches (51 mm) Peak to Peak displacement. Large diameter, lightweight armature. Double Field Coils (Upper and Lower) design. Ultra-Compact energy... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 22050
- Applications: Product qualification; Transportation or automotive vibration and shock simulation; Spacecraft Components, Large Mechanical Structures, Automotive Systems, Military Products
- Random Force - RMS: 22050
from AI SI LI (China) Test Equipment Co., Ltd.
MIL-STD-810G is a military standard that outlines testing methods and procedures for a variety of environmental conditions that equipment may experience in military operations. One of the tests specified in MIL-STD-810G is vibration testing, which is used to simulate the vibration environment that... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 674 to 35968
- Applications: Accelerometer or sensor calibration; Mechanical impedance testing; R&D or product design verification; Product qualification; Reliability testing; Semiconductor component testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Random Force - RMS: 674 to 35968
from Spectral Dynamics, Inc.
SD-22200-25/DA-120. Water Cooled Shaker Series. FEATURES. Water Cooled. 24,200 lbf (12,000 kgf) Sine Force. 22,200 lbf (12,000 kgf) Random Force. 2 Inches (51 mm) Peak to Peak displacement. Large diameter, lightweight armature. Double Field Coils (Upper and Lower) design. Ultra-Compact energy... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 26460
- Applications: Product qualification; Transportation or automotive vibration and shock simulation; Spacecraft Components, Large Mechanical Structures, Automotive Systems, Military Products
- Random Force - RMS: 26460
from AI SI LI (China) Test Equipment Co., Ltd.
MIL-STD-810F Standard Mechanical Shock Bump Tester is intended to simulate the effects of repetitive shocks likely to be experienced by components when they are transported in a vehicle from one place to another place or installed for its application on a moving vehicle or platform. The tests can be... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 674 to 35968
- Applications: Accelerometer or sensor calibration; Mechanical impedance testing; R&D or product design verification; Product qualification; Reliability testing; Semiconductor component testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Random Force - RMS: 674 to 35968
from Spectral Dynamics, Inc.
SD-35200-23/DA-160. Water Cooled Shaker Series. FEATURES. Water Cooled. 35,200 lbf (16,000 kgf) Sine Force. 35,200 lbf (16,000 kgf) Random Force. 2 Inches (51 mm) Peak to Peak displacement. Large diameter, lightweight armature. Double Field Coils (Upper and Lower) design. Ultra-Compact energy... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 35280
- Applications: Product qualification; Transportation or automotive vibration and shock simulation; Electronic Assemblies, Automotive, Aviation, Military, Medical, and Electronic Manufacturing Industries
- Random Force - RMS: 35280
from AI SI LI (China) Test Equipment Co., Ltd.
A PCB vibration test bench is designed to simulate the vibrations that a PCB might experience during its operation. The test bench typically consists of a base plate, on which the PCB is mounted, and a vibration generator that produces vibrations of different frequencies and amplitudes. The... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 674 to 35968
- Applications: Accelerometer or sensor calibration; Mechanical impedance testing; R&D or product design verification; Product qualification; Reliability testing; Semiconductor component testing; Seismic vibration simulation; Structural fatigue testing; Transportation or automotive vibration and shock simulation
- Random Force - RMS: 674 to 35968
from Spectral Dynamics, Inc.
SD-35200-25/DA-160. Water Cooled Shaker Series. FEATURES. Water Cooled. 35,200 lbf (16,000 kgf) Sine Force. 35,200 lbf (16,000 kgf) Random Force. 2 Inches (51 mm) Peak to Peak displacement. Large diameter, lightweight armature. Double Field Coils (Upper and Lower) design. Ultra-Compact energy... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 35280
- Applications: Product qualification; Transportation or automotive vibration and shock simulation; Spacecraft Components, Large Mechanical Structures, Automotive Systems, Military Products
- Random Force - RMS: 35280
from Spectral Dynamics, Inc.
SD-39600-23/DA-180. Water Cooled Shaker Series. FEATURES. Water Cooled. 39,600 lbf (18,000 kgf) Sine Force. 39,600 lbf (18,000 kgf) Random Force. 2 Inches (51 mm) Peak to Peak displacement. Large diameter, lightweight armature. Double Field Coils (Upper and Lower) design. Ultra-Compact energy... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 39690
- Applications: Product qualification; Transportation or automotive vibration and shock simulation; Spacecraft Components, Large Mechanical Structures, Automotive Systems, Military Products
- Random Force - RMS: 39690
from Spectral Dynamics, Inc.
SD-39600-25/DA-180. Water Cooled Shaker Series. FEATURES. Water Cooled. 39,600 lbf (18,000 kgf) Sine Force. 39,600 lbf (18,000 kgf) Random Force. 2 Inches (51 mm) Peak to Peak displacement. Large diameter, lightweight armature. Double Field Coils (Upper and Lower) design. Ultra-Compact energy... [See More]
- Test Modes: Random vibration mode testing; Shock mode testing; Sinusoidal mode vibration testing
- Peak Sine force: 39690
- Applications: Product qualification; Transportation or automotive vibration and shock simulation; Spacecraft Components, Large Mechanical Structures, Automotive Systems, Military Products
- Random Force - RMS: 39690