Worm Drive Hose Clamps Hose Clamps and Band Clamps
from Kuriyama of America, Inc.
GENERAL APPLICATIONS. Automotive. Industrial. General purpose. CONSTRUCTION. Four-piece construction consisting of a 1/2" wide, 300 series stainless steel band; plated carbon steel hex screw with 5/16" head and two-piece, 300 series stainless steel housing. Quadra-Lock Housing - Four-piece,... [See More]
- Type: Band; WormDrive
- Clamping Width: 0.5000
- Capacity / Jaw Opening: 1.06 to 2
- Material: Stainless Steel; Stainless Steel
from Kuriyama of America, Inc.
GENERAL APPLICATIONS. Automotive. Industrial. CONSTRUCTION. Four-piece construction consisting of a 9/16" wide, 300 series stainless steel band; plated carbon steel hex screw with 5/16" head and two-piece, 300 series stainless steel housing. Quadra-Lock Housing - Four-piece, quadra-lock housing... [See More]
- Type: Band; WormDrive
- Clamping Width: 0.5625
- Capacity / Jaw Opening: 1.06 to 2
- Material: Stainless Steel; Stainless Steel
from Kuriyama of America, Inc.
GENERAL APPLICATIONS. Air intake and coolant connections. Systems where clamps cannot be retightened. Systems with expansion or contraction. CONSTRUCTION. 5/8" wide, 300 series stainless steel band; plated carbon steel hex screw with 3/8" head; two-piece, 300 series stainless steel housing and ten... [See More]
- Type: WormDrive
- Clamping Width: 0.5625
- Capacity / Jaw Opening: 1.25 to 2.12
- Material: Stainless Steel; Stainless Steel
from Kuriyama of America, Inc.
GENERAL APPLICATIONS. Small diameter applications. Air & fuel lines. CONSTRUCTION (WGC-MCS. Three-piece construction consisting of a 5/16" wide, 300 series stainless steel band; plated carbon steel hex screw with 1/4" head and one-piece, 300 series stainless steel housing. FEATURES AND... [See More]
- Type: Band; WormDrive
- Clamping Width: 0.3125
- Capacity / Jaw Opening: 0.5000 to 0.9062
- Material: Stainless Steel; Stainless Steel
from Reid Supply
Plumbing and hosing for pneumatic/hydraulic applications is an integral but complicated task in the manufacturing process. Reid Supply has a broad selection of vibration dampening and noise cancelling hose clamps that will enable you clamp your hoses ergonomically in multiple orientations around... [See More]
- Type: WormDrive
- Clamping Width: 0.5000
- Capacity / Jaw Opening: 0.5630 to 1.06
- Material: Stainless Steel; Stainless Steel
from U.S. Plastic Corporation
The quickchange connections allow you to replace or inspect fittings in seconds as opposed to time consuming threaded liquid handling systems. Easy to use, there is no pipe thread installation, no chance of cross threading, no pipe sealant and no cure time needed. Versatile by nature of the... [See More]
- Type: WormDrive
from Tompkins Industries, Inc.
Worm Gear Clamp. For common home and auto applications. Screw: 5/16 ” hex-head, plated carbon steel. Band: 1/2 ” width, 201/301 stainless steel. Housing: 201/301 stainless steel. Attributes. Clamp Type: Worm Gear [See More]
- Type: WormDrive
- Clamping Width: 0.5000
- Capacity / Jaw Opening: 0.2500 to 0.6300
- Material: Steel
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 0.3937 to 0.6299
from U.S. Plastic Corporation
Clamps are tine, tough and precision engineered for use in small hose applications. Slim 5/16" band and low profile housing make them easy to install in confined areas. Screw has a 1/4" hex head. Micro-Gear 62M clamps are all 300 grade stainless steel marine grade clamps. Installation torque is 10... [See More]
- Type: WormDrive
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 0.6299 to 1.06
from U.S. Plastic Corporation
Clamps are all stainless steel with a 3/8" hex-head screw and is especially suited for industrial applications. 3/8" hex head screw is 410 SS and the housing and 9/16" wide band are 200 SS. The installation torque is 35 in-lbs. All sizes are listed minimum x maximum range of clamp. [See More]
- Type: WormDrive
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 0.7874 to 1.26
from U.S. Plastic Corporation
Clamps are tine, tough and precision engineered for use in small hose applications. Slim 5/16" band and low profile housing make them easy to install in confined areas. Screw has a 1/4" hex head. Micro-Gear 62M clamps are all 300 grade stainless steel marine grade clamps. Installation torque is 10... [See More]
- Type: WormDrive
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 1.26 to 1.97
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 1.57 to 2.36
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 0.9449 to 1.06
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 1.1 to 1.26
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 1.38 to 1.57
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 1.5 to 1.69
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 1.69 to 1.93
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 2.13 to 2.36
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 2.36 to 2.68
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Stainless Steel
- Capacity / Jaw Opening: 2.52 to 2.76
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 3.01 to 3.31
from Schmalz Inc.
Hose clamp SSB for securing smooth hoses. Hose clamp SSD for securing hoses with wire reinforcement [See More]
- Type: WormDrive
- Material: Steel
- Capacity / Jaw Opening: 3.35 to 3.54