Bar Stock Lead, Tin, and Low Melting Alloys
from MarsMetal
Our MarShield division manufactures straight, interlocking, and corner lead bricks, commonly used for radiation shielding or ballast weight. Bricks are available in a wide range of sizes, thicknesses and shapes to suit your application. [See More]
- Shape / Form: Squares; Bar Stock; Brick; Semi-finished, Mill Stock or Near Net Shapes
- Processing, Temper & Finish: Continuous, Centrifugal or Other Casting Process
- Nonferrous: Lead
- Applications: BuildingConstruction
from Indium Corporation
Fusible Alloys include a group of binary, ternary, quaternary, and quinary alloys containing Bismuth, lead, tin, cadmium and indium. The term fusible alloy refers to any of the more than 100 white-metal alloys that melt at relatively low temperatures. Fusible alloys are materials that melt at less... [See More]
- Shape / Form: Bar Stock; Semi-finished, Mill Stock or Near Net Shapes
- Specialty / Other Types: Specialty; FusibleAlloy; Cadmuim
- Nonferrous: Bismuth; Indium; Tin; Lead
- UTS: 5400
from Umicore Metal Deposition Solutions
Coating material. Indium. Purity. 99.999%. Form. Rod. Dimensions. Ø 8 x 15 mm. Quantity. 500 g. Theoretical density at 20 °C in g/cm ³. 7.3. Melting point in °C. 157. 10 ⁻ ² mbar in °C. 920. 10 ⁻ ¹ mbar in °C. 1050. Boiling point in °C. 2072. [See More]
-
Shape / Form: Bar Stock; ; Round Bar or Rod Stock
Rod
- Width / OD: 0.3150
- Nonferrous: Indium
- Length: 0.5906
from Indium Corporation
Fusible Alloys include a group of binary, ternary, quaternary, and quinary alloys containing Bismuth, lead, tin, cadmium and indium. The term fusible alloy refers to any of the more than 100 white-metal alloys that melt at relatively low temperatures. Fusible alloys are materials that melt at less... [See More]
- Shape / Form: Bar Stock; Semi-finished, Mill Stock or Near Net Shapes
- Specialty / Other Types: FusibleAlloy
- Nonferrous: Bismuth; Indium; Tin; Lead
- Thickness: 1
from Indium Corporation
Typical Indium Analysis. 99.99%. PPMWT. Fe : 1-2. Ni : 2-6. Cu : 2-6. Cd : 5-10. Pb : 10-30. Sn : 10-25. Ti : 1-4. Analysis by OES. * Please note that these are typical ppm levels, and do not represent maximum, minimum, or lot specific levels. If you have specific requirements for one or two... [See More]
- Shape / Form: Bar Stock; Anode; Semi-finished, Mill Stock or Near Net Shapes
- Thickness: 0.5000
- Nonferrous: Indium
- Length: 11.75
from Indium Corporation
We produce 6N material with impurities held to less than 100 ppb/weight as analyzed by OES. 6N (and often 5N) indium is selected when the user's application offers enough flexibility to allow the balancing of device performance with material cost. [See More]
- Shape / Form: Bar Stock; Semi-finished, Mill Stock or Near Net Shapes
- Thickness: 0.7500
- Nonferrous: Indium
- Width / OD: 1.25