-
Supplier: Belmont Metals, Inc.
Description: Sculpture Alloys Featuring Everdur Silicon Bronze, Art Caster’s Brass, Special H Silicon Bronze, Beryllium Copper, Jewelers’ Manganese Bronze, and White Bronze. Belmont offers extensive experience in the production of standard and custom alloys for casting of
- Shape / Form: Semi-finished Shape / Mill Stock, Bar Stock, Flats / Rectangular Bar, Squares / Square Bar, Ingot, Other
-
Supplier: Materion Corporation
Description: Alloy 25 strip by Materion Brush Performance Alloys provides the highest strength of any copper beryllium alloy, with electrical conductivity considerably greater than other, high strength copper alloys. Since Alloy 25 is heat treated after forming, it provides excellent
- Applications: Automotive / Vehicular, Electronics / RF-Microwave, Wear Parts / Tooling, Other
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C), Refractory / Reactive (UNS R)
- Performance Features: Light Alloy
- Shape / Form: Rod / Round Bar Stock, Flats / Rectangular Bar
-
Supplier: National Bronze & Metals Inc.
Description: C17200 Beryllium Copper ASTM B196, AMS 4533, RWMA CLASS IV Most commonly utilized beryllium copper alloy and is notable for exhibiting the highest strength and hardness compared to commercial copper alloys. Its strength and hardness is similar to that of steel.
- Applications: Electrical / HV Parts, Wear Parts / Tooling
- Elongation: 1 to 35 %
- Hollow / Tube Stock: Yes
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
-
-
Supplier: National Bronze & Metals Inc.
Description: C17510 Beryllium Copper ASTM B441 (ROD), ASTM B534 (PLATE) , RWMA Class III Primarily utilized in applications that require high thermal or electric conductivity. The alloy offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of
- Applications: Electrical / HV Parts
- Elongation: 5 to 28 %
- Hollow / Tube Stock: Yes
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
-
Supplier: Materion Corporation
Description: Alloy 310 by Materion Brush Performance Alloys is a low cost copper beryllium nickel cobalt alloy with high electrical and thermal conductivity and good strength and hardness. The alloy has also been shown to have excellent thermal fatigue resistance.
- Applications: Automotive / Vehicular, Electronics / RF-Microwave, Wear Parts / Tooling, Other
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C), Refractory / Reactive (UNS R)
- Performance Features: Light Alloy
- Processing / Finish: Hardened / Heat Treated, Cast (Continuous, Centrifugal, etc.)
-
Supplier: National Bronze & Metals Inc.
Description: C17200 Beryllium Copper ASTM B196, AMS 4533, RWMA CLASS IV Most commonly utilized beryllium copper alloy and is notable for exhibiting the highest strength and hardness compared to commercial copper alloys. Its strength and hardness is similar to that of steel.
- Applications / Industry: Circuit Breakers, Contactors, Electronics (IC Packaging / Interconnect), Switches / Relays
- Base Metal / Spring Material: Copper Beryllium (CuBe), Copper / Copper Alloy
- Conductivity: 22 %IACS
- Contact Material: Copper (Cu)
-
Supplier: National Bronze & Metals Inc.
Description: C17510 Beryllium Copper ASTM B441 (ROD), ASTM B534 (PLATE) , RWMA Class III Primarily utilized in applications that require high thermal or electric conductivity. The alloy offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of
- Applications / Industry: Circuit Breakers, Contactors, Electronics (IC Packaging / Interconnect), Switches / Relays
- Base Metal / Spring Material: Copper Beryllium (CuBe), Copper / Copper Alloy
- Conductivity: 48 %IACS
- Contact Material: Copper (Cu)
-
Supplier: Materion Corporation
Description: Alloy 3 mill hardened strip by Materion Brush Performance Alloys provides good strength with high electrical conductivity and good resistance to stress relaxation. It is a drop-in replacement for the obsolete Alloy 10 (C17500) strip material.
- Applications: Automotive / Vehicular, Electronics / RF-Microwave, Wear Parts / Tooling, Other
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C), Refractory / Reactive (UNS R)
- Performance Features: Light Alloy
- Processing / Finish: Hardened / Heat Treated
-
Supplier: Materion Corporation
Description: Alloy M25 by Materion Brush Performance Alloys offers the strength properties of Alloy 25, with the added benefit of being "free machining.” Alloy M25 rod and wire contain a small amount of lead to provide an alloy tailored for automatic machining operations. Lead promotes formation of finely
- Applications: Automotive / Vehicular, Electronics / RF-Microwave, Wear Parts / Tooling, Other
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C), Refractory / Reactive (UNS R)
- Performance Features: Leaded / Free Machining, Light Alloy
- Shape / Form: Rod / Round Bar Stock, Flats / Rectangular Bar
-
Supplier: SAE International
Description: This specification covers one type of copper-beryllium alloy in the form of bars, rods, forgings, and forging stock.
-
Supplier: SAE International
Description: This specification covers one type of copper-beryllium alloy in the form of bars, rods, forgings, and forging stock.
-
Supplier: Belmont Metals, Inc.
Description: Copper Master Alloys with: Beryllium, Boron, Cadmium, Chromium, Iron, Lithium, Magnesium, Manganese, Nickel, Phosphorous, Silicon, Tellurium, Titanium, Zinc, Zirconium Belmont Copper Master Alloys are alloying elements manufactured from high purity Copper and is combined
- Applications: Other
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Shape / Form: Other
-
Supplier: Belmont Metals, Inc.
Description: Copper Master Alloys with: Beryllium, Boron, Cadmium, Chromium, Iron, Lithium, Magnesium, Manganese, Nickel, Phosphorous, Silicon, Tellurium, Titanium, Zinc, Zirconium Belmont Copper Master Alloys are alloying elements manufactured from high purity Copper and is combined
- Applications: Other
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Shape / Form: Other
-
Supplier: Belmont Metals, Inc.
Description: Copper Master Alloys with: Beryllium, Boron, Cadmium, Chromium, Iron, Lithium, Magnesium, Manganese, Nickel, Phosphorous, Silicon, Tellurium, Titanium, Zinc, Zirconium Belmont Copper Master Alloys are alloying elements manufactured from high purity Copper and is combined
- Applications: Other
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Shape / Form: Other
-
Supplier: Reid Supply
Description: produce an alloy much harder than copper alone. Bronze is characterized by its dull-gold color, and has faint rings on its surface (which helps one to differentiate it from brass). Bronze bars are used in the construction of sculptures, musical instruments and medals, and in industrial
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Overall Length: 6.5 inch
- Overall Width / OD: 1.25 inch
- Performance Features: Specialty / Other
-
Supplier: Reid Supply
Description: produce an alloy much harder than copper alone. Bronze is characterized by its dull-gold color, and has faint rings on its surface (which helps one to differentiate it from brass). Bronze bars are used in the construction of sculptures, musical instruments and medals, and in industrial
- Hollow / Tube Stock: Yes
- ID: 1 inch
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Overall Length: 6.5 inch
-
Supplier: Reid Supply
Description: metal, bronze bars are produced to ASTM standards for consistent precision, quality and uniformity. Bars are vacuum impregnated with non-detergent SAE 30 oil to provide excellent lubrication while being corrosion resistant. The O.D. is oversized and the I.D. is undersized to allow for
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Overall Length: 36 inch
- Overall Width / OD: 0.8750 inch
- Performance Features: Specialty / Other
-
Supplier: Reid Supply
Description: metal, bronze bars are produced to ASTM standards for consistent precision, quality and uniformity. Bars are vacuum impregnated with non-detergent SAE 30 oil to provide excellent lubrication while being corrosion resistant. The O.D. is oversized and the I.D. is undersized to allow for
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Overall Length: 72 inch
- Overall Width / OD: 1 inch
- Performance Features: Specialty / Other
-
Supplier: H.M. Hillman Brass & Copper
Description: Length specified by client
- Alloy: Yes
- Clad / Bimetal: Yes
- Elongation: 42 %
- Hollow / Tube Stock: Yes
-
Supplier: G.L. Huyett
Description: We offer a complete inventory of sleeves, flanges, thrust washers, cored stock and plates.
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Overall Length: 2 to 12 inch
- Overall Thickness: 0.1250 to 1 inch
- Overall Width / OD: 0.5000 to 6 inch
-
Supplier: Concast Metal Products Co.
Description: Ranging from aluminum bronzes to high tin bronzes, these alloys are recognized by the Copper Development Association (CDA) and are manufactured to ASTM specifications.
- Alloy: Yes
- Elongation: 25 %
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Processing / Finish: Cast (Continuous, Centrifugal, etc.)
-
Supplier: Diversified Bronze & Manufacturing, LLC
Description: Brinell hardness at 500 kg load 225
- Alloy: Yes
- Elongation: 12 %
- Hollow / Tube Stock: Yes
- ID: 4 inch
-
Supplier: Corey Steel Company
Description: Corey Steel Company has been distributing copper and copper alloy products since the company's inception. Various grades of brass, bronze, high leaded brass, and leaded nickel silver can be found in our inventory. As one of the leading long products suppliers to the screw machine
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Overall Length: 144 inch
- Overall Thickness: 0.1562 to 2 inch
- Overall Width / OD: 0.1562 to 2 inch
-
Supplier: RS Components, Ltd.
Description: The RS Pro range of Bronze rod and tubes, offer great machining qualities and a high degree of resistance to corrosion.,Suitable for different types of applications. To BS1400: 1985: PBI Concast. Produced to nominal size + 1/32 in. plus tolerance. High mechanical strength/freedom from porosity.
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Overall Length: 13 inch
- Overall Width / OD: 0.6250 inch
- Shape / Form: Rod / Round Bar Stock
-
Description: 69.8mm Outside Diameter, 165 mm Length, Oil Impregnated Bronze Bar Stock
- Applications: Wear Parts / Tooling
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Overall Length: 6.5 inch
- Overall Width / OD: 2.75 inch
-
Supplier: Quality Bearings & Components
Description: Sintered Bronze SOLID BAR STOCK – INCH • Oil-Impregnated Bronze SAE 841 • Self-Lubricating NOTE: All bars are supplied with oversized so they can be machine finished to dimensions shown.
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Overall Length: 6.5 inch
- Overall Width / OD: 0.5000 inch
- Shape / Form: Rod / Round Bar Stock
-
Supplier: Isabellenhutte USA
Description: thermodynamic state—guaranteeing stability values in the ppm range per annum. MANGANIN® Copper-manganese-nic kel alloy Medium specific resistance Very low TCR and low thermoelectric EMF ZERANIN®
- Alloy: Yes
- Applications: Automotive / Vehicular, Resistance Alloy / Heating, Wear Parts / Tooling
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Shape / Form: Rod / Round Bar Stock
-
Supplier: Beemer Precision, Inc.
Description: Self-lubricating oil impregnated sintered iron/copper.
- Ferrous / Iron Based: Ferrous / Iron Based - Any Type
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Overall Width / OD: 0.3750 to 4.88 inch
- Shape / Form: Rod / Round Bar Stock
-
Supplier: Bunting Bearings, LLC
Description: B04 is a “GREEN” non-leaded alloy Copper-Bismuth Bronze C89835 Federalloy III (932 Version) Bunting continuous cast bronze bars of B04 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting
- Applications: Bearings (BQ)
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C)
- Overall Width / OD: 1 to 10 inch
- Shape / Form: Rod / Round Bar Stock
-
Supplier: Leading Edge Metals & Alloys, Inc.
Description: Constantan is a copper-nickel alloy used in a variety of thermocouple applications. It is paired with iron, copper and Chromel® to form types J, T and E thermocouples, respectively. Known for its high electrical resistivity and its ability to perform consistently despite changes in
- Alloy: Yes
- Applications: Electronics / RF-Microwave
- Nonferrous Metals: Non-ferrous - Any Type, Copper, Brass or Bronze Alloy (UNS C), Nickel / Nickel Alloy (UNS N), Specialty / Other (UNS M)
- Overall Length: 75 to 144 inch
Find Suppliers by Category Top
Featured Products Top
-
Beryllium Copper Springs When considering a spring for a corrosive environment, Beryllium Copper (BeCu) is an ideal choice for a spring alloy. Beryllium Coppers are also known as spring copper which has the best combination of electrical conductivity, corrosion (read more)
Browse Torsion Springs Datasheets for Coiling Technologies, Inc. -
S-122 0.6" x 0.8", S-122 roll formed copper electrification bar with plastic cover. This channel is roll formed in corrosion resistant material such as Hot Dipped Galvanized, Copper, Stainless, or Aluminized (read more)
Browse Copper, Brass, and Bronze Alloys Datasheets for MP Metal Products -
Roll Formed Custom Shapes Roll-forming unusual, uncommon and custom shapes is a specialty of MP Metal Products. Supports, purlins, seals, battens, conductor bars, heat shields, pool rims, stiffeners, heat & light (read more)
Browse Specialty Metal Shapes and Stock Datasheets for MP Metal Products -
S-110 0.4" x 1", S-110 16 to 20-gauge roll formed galvanized electrical conductor bar. This channel is roll formed in corrosion resistant material such as Hot Dipped Galvanized, Copper, Stainless, or Aluminized. The function (read more)
Browse Metal Profiles and Structural Shapes Datasheets for MP Metal Products -
Roll Formed Custom Shapes Roll-forming unusual, uncommon and custom shapes is a specialty of MP Metal Products. Supports, purlins, seals, battens, conductor bars, heat shields, pool rims, stiffeners, heat & light (read more)
Browse Specialty Metal Shapes and Stock Datasheets for MP Metal Products -
S-126 0.4" x 1.0", S-126 20-gauge roll formed copper and galvanized conductor bar with end hole for connection. This channel is roll formed in corrosion resistant materials such as Hot Dipped Galvanized, Copper, Stainless, or (read more)
Browse Specialty Metal Shapes and Stock Datasheets for MP Metal Products -
: 301 Stainless Steel 316 Stainless Steel Nickel Copper Monel Hastelloy® C-276 Inconel® Aluminum Brass Bronze Beryllium copper The list above is not all inclusive, and (read more)
Browse CNC Machining Services Datasheets for CT Gasket & Polymer Co., Inc. -
constructed with passivated stainless-steel bodies and gold-played beryllium-copper (BeCu) contacts to minimize insertion loss and return loss in high-frequency applications. KRYTAR also offers complete engineering services for custom designs that meet or exceed critical (read more)
Browse RF Adapters Datasheets for KRYTAR, Inc. -
; each enclosure is supplied with two spring bars. BODY-CASE can also be hung around the neck on a lanyard, clipped to a belt/pocket, fitted to a key ring or carried loose. Power can be supplied by round or button cells on the PCB or by a rechargeable battery with a copper loop for inductive charging (read more)
Browse Electronic and Instrument Enclosures Datasheets for OKW Enclosures, Inc. -
gestures wireless networking high protection classes IP 65 / IP 67 moulded in ASA plastic with a high UV protection internal power supply with round or button cells which are mounted directly on the PCB - alternatively, the use of a rechargeable battery with copper (read more)
Browse Electronic and Instrument Enclosures Datasheets for OKW Enclosures, Inc.
More Information Top
-
Uni-Directional Axial Tension Fatigue Tests of Beryllium Copper and Several Precipitation Hardening Corrosion-Resistant Steels
This wasthe reason for the tests on the beryllium copper bar stock .
-
The Influence of Composition, Strain Hardening, and Precipitation Heat Treatment on the Mechanical Properties and Stress Corrosion Resistance of Copper-Berylli...
Hardness tests were also made on specimens of 5-in-thick discs cut from copper - beryllium bar stock meeting the composition requirements of ASTM Specification B 194.