-
Supplier: Mile-X Equipment, Inc.
Description: Specifications: Battery Test Technology Dynamic conductance with direct temperature and deep scan technology Applications Automotive Marine battery Motorcycle Group 31 Commercial-4D/8D Lawn and Garden 6 and 12 volt
-
Supplier: Mile-X Equipment, Inc.
Description: load testing for up to 1000 CCA batteries. A great time-saver for testing electrical systems on 12, 12/24 and 24 Volt vehicles. Coated circuit board prevents damage and meter inaccuracy due to moisture and dirt in most shop environments. Circuits protected against reverse voltages due
-
Supplier: Mile-X Equipment, Inc.
Description: .3-30 Amp/hr 10-500 CCA Power Requirements: Powered by battery under test Voltage Range: 8 - 19 Volt DC Display: 4-digit / 7 segment LED, +3 status LEDs Operating Temperature: 0 to 120 F/-18 to 50 C Housing Material Acid/impact resistant ABS Product Dimens
-
-
Battery Monitors and Testers - Associated 6044 Automated Battery/Electrical System Tester -- ASS6044Supplier: Mile-X Equipment, Inc.
Description: Midtronics GR8-1100KIT Battery Diagnostic Station with Printer Midtronics collects sales tax in some states. Click here for a list of states tax will be collected. This Battery Charger ship by truck and extra shipping charges will apply to ship to a non
-
Supplier: Klein Tools, Inc.
Description: VOLTAGE/CONTINUITY TESTER TYPE 2-3/8 INCH WIDTH X 1-1/4 INCH DEPTH X 7-3/8 INCH HEIGHT SIZE BRIGHT LED DISPLAY TYPE ETL (CANADA AND US) APPROVAL (3) AAA BATTERY TYPE AUDIBLE INDICATION TYPE 600 VOLT AC VOLTAGE RANGE 600 VOLT DC VOLTAGE RANGE LENGTH 7.375
- AC Voltage Range: 600 volts
- DC Voltage Range: 600 volts
-
Supplier: ValueTronics International, Inc.
Description: Reduced testing time 16 volt testing capability Tests multiple intercell connectors & 8 posts Compatible with the PowerSure database Quick, simple, safe & accurate operation High ampere-hour (up to 6000 AH) testing capability 16
- Form Factor: Portable / Handheld Tester
- Test Capability: Charge, Voltage
-
Supplier: ASG, Division of Jergens, Inc.
Description: , Battery Indicator, Charging Status Indicator, and Transducer State Battery Charger: 9V 500mA 110 Volt with US Plug (Optional International Charger Available: 9 Volt, 670 mA, 90-264 VDC, ASG #66619) Key Buttons: 8 Button Display Digits: 6 Digits Maximum
- Measurement Type: Torque
- Special Instrument Type: Modular, Battery Powered
- Torque Measurement Range: 26.55 to 265 In-lbs
-
Supplier: ASG, Division of Jergens, Inc.
Description: , Battery Indicator, Charging Status Indicator, and Transducer State Battery Charger: 9V 500mA 110 Volt with US Plug (Optional International Charger Available: 9 Volt, 670 mA, 90-264 VDC, ASG #66619) Key Buttons: 8 Button Display Digits: 6 Digits Maximum
- Measurement Type: Torque
- Special Instrument Type: Modular, Battery Powered
- Torque Measurement Range: 88.5 to 885 In-lbs
-
Supplier: ASG, Division of Jergens, Inc.
Description: , Battery Indicator, Charging Status Indicator, and Transducer State Battery Charger: 9V 500mA 110 Volt with US Plug (Optional International Charger Available: 9 Volt, 670 mA, 90-264 VDC, ASG #66619) Key Buttons: 8 Button Display Digits: 6 Digits Maximum
- Measurement Type: Torque
- Special Instrument Type: Modular, Battery Powered
- Torque Measurement Range: 0.5310 to 4.96 In-lbs
-
Supplier: ASG, Division of Jergens, Inc.
Description: , Battery Indicator, Charging Status Indicator, and Transducer State Battery Charger: 9V 500mA 110 Volt with US Plug (Optional International Charger Available: 9 Volt, 670 mA, 90-264 VDC, ASG #66619) Key Buttons: 8 Button Display Digits: 6 Digits Maximum
- Measurement Type: Torque
- Special Instrument Type: Modular, Battery Powered
- Torque Measurement Range: 8.85 to 88.5 In-lbs
-
Supplier: VAST STOCK CO., LIMITED
Description: Battery Management SEPIC Const.Cur/Const.Volt Bat.Charger
-
Supplier: TMP Pro Distribution
Description: Designed to be easy-to-operate in a compact, heavy duty steel box. This Cable tester will check your balanced and unbalanced instrument, RCA, microphone, and speaker cables. The unit checks for shorts, cross wiring, and open connections. Operates on a 9 volt battery, which is
- Application: Audio
-
Supplier: BTECH, Inc.
Description: Capabilities: 2 Configurable Locations 8 Parallel Strings Per Location 48 Monitoring Points with Impedance Per Location 2, 4, 6, 8, 12 or 16 Volt Units 2-60 Volt Systems 1 Ambient Temperature Communications:
- Features: Power Management / Control
- Form Factor: Test Module / Sub-system
- Input Voltage: 24 to 240 volts
- Operating Temperature: -5 to 75 C
-
Supplier: BTECH, Inc.
Description: -a-Glance R/Y/G LED display 4 Configurable Locations 8 Parallel Strings Per Location 255 Monitoring Points with Impedance 2, 4, 6, 8, 12 or 16 Volt Units 2-480 Volt Systems 1 Ambient Temperature Voltage-only option
- Features: Power Management / Control
- Form Factor: Test Module / Sub-system
- Input Voltage: 24 to 240 volts
- Operating Temperature: -5 to 75 C
-
Supplier: Transcat, Inc.
Description: Overview Electrical tester with OpenJaw™ Current The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets
-
Supplier: Waytek, Inc.
Description: Type: Mechanical Circuitry: SPST Amp Rating: 600A Max Volts: 32VDC Contact Action: On-Off High Cranking, Panel mount with lock out Temp. Range: -58°F (-50°C) to 221°F (105°C) Terminal stud size 3/8 -16 x 7/8 long
- Current Test Range: 600 amps
- Voltage Test Range: 32 volts
-
Supplier: Waytek, Inc.
Description: InPower's Model LVD20 Series Low Voltage Disconnects (LVD) automatically disconnects 12 volt loads from the battery when the battery voltage drops below a critical level, leaving enough charge for the vehicle to be restarted. When positive voltage is applied to the control
- Current Test Range: 200 amps
-
Supplier: Waytek, Inc.
Description: InPower's Model LVD20 Series Low Voltage Disconnects (LVD) automatically disconnects 12 volt loads from the battery when the battery voltage drops below a critical level, leaving enough charge for the vehicle to be restarted. When positive voltage is applied to the control
- Current Test Range: 100 amps
-
Supplier: ValueTronics International, Inc.
Description: , ?,WATT, Frequency, Continuity Jaw openings 1.37" (35mm) The lightweight, portable, battery-powered BK Precision 325 Clamp-On meter measures the most common AC Volts, DC Volts, and AC current needed to troubleshoot residential and small commercial electrical systems
-
Supplier: ValueTronics International, Inc.
Description: µH range to .01 H for 19.99 H range: 9 automatic ranges Ringing Test Excites inductor with sharp wavefront of 5 volts peak amplitude 60 Hz Accuracy: ± 1 count from readings of 8 to 13: 10 rings or more automatically indicated as GOOD
-
Supplier: Utmel Electronic Limited
Description: IC LI-ION CHARGE MGMT 20-HTSSOP
- Current Test Range: 1.2 amps
- Input Voltage: 4.5 to 10 volts
- Operating Temperature: -40 to 70 C
Find Suppliers by Category Top
Featured Products Top
-
-VOLTAGE ACTUATOR WITH OPTIONAL BATTERY BACKUP The ProVolt™ Series Multiple Voltage Actuator is a quarter turn Rotary Actuator that will work with all voltage inputs. With the flip of an internal switch on the board, these actuators can accept any of the following input voltages: 115vac, 230 (read more)
Browse Electric Valve Actuators Datasheets for Indelac Controls, Inc. -
lengths are 4.00" (101.6mm), 6.00" (152.4mm) or 8.00" (203.2mm). Lead lengths are in red and black. The third style (PN 227) is a pre-wired "Dual" battery strap which connects 9V batteries in parallel. These are manufactured with fiber bases and have Steel, Nickel-plated contacts. Featured are (read more)
Browse Battery Holders Datasheets for Keystone Electronics Corp. -
Product Category: Batteries Voltage: 2.8 volts Capacity: 0.0480 ampere-hr Operating Temperature: 32 to 158 F (0.0 to 70 C) (read more)
Browse Batteries Datasheets for Shenzhen Shengyu Electronics Technology Limited -
Capacity CR2032 : 225mAh CR2450 : 620mAh CR2477 : 1000mAh Suitable for remote controller, wireless key fob, GPS, RFID device, small tester/device and so on. Available in 4 sizes with 8 models and selectable in (read more)
Browse Electronic and Instrument Enclosures Datasheets for Takachi Electronics Enclosure Co., Ltd. -
D/C 12 volt battery with joy stick activation and a built in 12 volt charger (standard) A/C 110 volt Hand held pendant (optional) Options • Different (read more)
Browse Lifts Datasheets for Econo Lift Limited -
SI-DN HEAVY DUTY, LOW VOLTAGE SOFT STARTER 8-2,700 AMPS, 230-1,200 VOLTS The SI-DN is an extremely sophisticated and reliable soft starter designed for use with standard three-phase, three-wire and six-wire, squirrel cage induction motors. It (read more)
Browse AC Motor Starters Datasheets for Solcon Solutions LLC -
-hour Battery Cycle - 8 hours minimum, based on standard duty cycle of 20% idle, 40% in motion full speed loaded, 40% in motion full speed unloaded. Charging Method - Automatic (Fast) charging or optional built-in charger. NOTE: SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE BASED ON PRODUCT IMPROVEMENTS OR TECHNICAL REQUIREMENTS. (read more)
Browse Automatic Guided Vehicles (AGV) Datasheets for Savant Automation, Inc. -
information technology to enhance our military effect. The three variants of the F-35 replaced crafts previously used in three branches of the US military: the Air Force’s A-10 & F-16, the Navy’s F/A-18, and the Marin Corps’ F/A-18 & AV-8B. The F-35 will also replace (read more)
Browse Transient Voltage Suppressor Diodes (TVS) Datasheets for MDE Semiconductor, Inc. -
possible in SWaP-constrained applications like unmanned vehicles.” The final component, the power unit, is often a battery. Yet even a component as seemingly simple as a battery has to pull heavy duty for military (read more)
Browse Transient Voltage Suppressor Diodes (TVS) Datasheets for MDE Semiconductor, Inc.
More Information Top
-
ZTS Inc MBT-LA2 - Lead Acid Multi-Battery Tester
The ZTS Lead Acid Multi-Battery Tester (MBT-LA2) provides a comprehensive means of testing the state of charge and battery condition for 2- volt , 4-volt, 6-volt, 8 -volt, and 12-volt lead acid battery types (SLA, AGM, Gel, Wet).
-
AEMC Electrical Power Testing - Test Instruments - Grainger Industrial Supply
• Earth Ground Tester , Earth Ground Resistance Range 0 to 2000k Ohms, Resolution 0.01 … … Reading +/-1 Count, Measuring Current 0.1 to 10mA, Earth Volts 42VAC, Soil Resistivity Yes … … Counts 1999, Power Source ( 8 ) C Batteries , Alkaline Recommended, Standards IEC …
-
Shopping In Measuring - Big Bruin
Model: GRT300 13X132 Earth Ground Tester , Earth Ground Resistance Range 0.002/0.02/0.2/2k Ohms … … Of Reading +/-3 Digits, Measuring Current 2ma, Earth Volts 0 To 300vac, Display … … 20,000, Power Source ( 8 ) 1.5v Aa Batteries , Standards En 61010-1 …
-
Battery testing for photovoltaic applications
The test results in Figure 9 also indicatethat the Morningstar SunSaver is providing the GNB 12-5OOOXAGM VRLA battery with 2 to 8 % more overcharge compared to the constant voltage charge algorithm. In additionto the increased overcharge, the PWM charge controller is charging at 14.0 volts instead of 14.1volts due to a voltage drop from the internal electricalresistancein the battery tester .
-
Printer Test
PST- 8 - Battery Tester Tests 6, 8 and 12 volt batteries ⢠16 character liquid crystal display shows test results ⢠…
-
Test Standards / Counters
PST- 8 - Battery Tester Tests 6, 8 and 12 volt batteries ⢠16 character liquid crystal display shows test results ⢠…
-
Electronics from the Ground Up: Learn by Hacking, Designing, and Inventing > Construction Techniques and Simple Test Equipment
… in the old days, before video recorders, people shot 8-mm or super 8 -mm home movies … The other selection we will concern ourselves with is the 1.5- volt and 9-volt setting … Before we look at how this battery tester works, I tested three 9-volt carbon batteries (all of them had been used to some degree).