Panel / Chassis Mount Charge Amplifiers and Charge Converters
from Baumer Ltd.
Charge amplifiers convert electrical charges (pC) emitted by piezo electric sensors into a proportional output voltage. Baumer charge amplifiers ars developed for industrial applications and are equipped with a digital reset and digital range switch. • Charge amplifier for piezo electric strain... [See More]
- Form Factor: Panel / Chassis Mount
- User Interface: None
- Outputs: Analog Voltage Output
- Operating Temperature: 23 to 140
from Columbia Research Labs, Inc.
Columbia Model 5624 Charge Amplifier has been designed for use with virtually all piezoelectric transducers to form various airborne vibration and shock data acquisition systems. It features small package size and extremely low power consumption. The Model 5624 Charge Amplifier provides both... [See More]
- Form Factor: Panel / Chassis Mount
- Maximum Output: 5.4
- Channels: 1
- Accuracy: 1
from Kistler Group
Analogue amplifier for industrial application. Properties: Open measuring range 100 pC … 1000000 pC. Bandwidth ≈ 0 kHz up to 20 kHz. *Connector BNC / TNC / D-Sub 9p/15p. *Output Voltage / Current. Control via IO / RS232 [See More]
- Form Factor: Panel / Chassis Mount
- Accuracy: 0.0500
- Channels: 4
- Outputs: Analog Voltage Output
from Columbia Research Labs, Inc.
The Columbia Series 5820 Charge Amplifiers are designed for use with virtually all piezoelectric transducers to form various airborne vibration and shock data acquisition systems. These devices feature a very small package size and extremely low power consumption. The Series 5820 Charge Amplifiers... [See More]
- Form Factor: Panel / Chassis Mount
- Maximum Output: 2.5
- Channels: 1
- Outputs: Analog Voltage Output
from Kistler Group
Digital amplifier for industrial application. Properties: Open measuring range 20 pC … 1000000 pC. Bandwidth ≈ 0 kHz up to 20 kHz. Connector KIAG 10-32 UNF neg. Interface: EtherCat, Ethernet/IP or ProfiNet. Features: Peak acquisition, Integral, Filter, etc [See More]
- Form Factor: Panel / Chassis Mount
- Outputs: Analog Voltage Output
- Channels: 4
- User Interface: None
from Columbia Research Labs, Inc.
Columbia Model 5840 Differential Charge Amplifier has been specifically designed to operate with differential output piezoelectric vibration sensors typically used in aircraft engine condition monitoring systems. It features small package size and extremely low power consumption. The Model 5840... [See More]
- Form Factor: Panel / Chassis Mount
- Differential Channels: Yes
- Channels: 1
- Maximum Output: 5.4
from Kistler Group
The miniature charge amplifier Type 5039A converts the electrical charge signals yielded by piezoelectric sensors into proportional voltages. The instrument is integrated into a rugged metal housing according to degree of protection IP-65 and conceived for industrial use. The Type 5039A is a... [See More]
- Form Factor: Panel / Chassis Mount
- Outputs: Analog Voltage Output; Analog Current Output
- Channels: 1
- User Interface: None
from Columbia Research Labs, Inc.
The Columbia Model 5804 Military-Grade Strain Gage Amplifier is designed to amplify signals from Columbia's DT and DTD Series Full-Bridge Strain Sensors. The system will provide both strain and temperature outputs. The strain output incorporates a microprocessor-driven auto zeroing circuit capable... [See More]
- Form Factor: Panel / Chassis Mount
- User Interface: None
- Channels: 1
- Operating Temperature: -40 to 185
from Kistler Group
The MiniAmp Type 5030A... is a single channel, industrial charge amplifier, which converts the charge signal from piezo electric sensors into a proportional voltage signal. Compact size. 2 measuring ranges 10:1. External control (PLC) of "Measure" and " range" (measuring range). Signal output... [See More]
- Form Factor: Panel / Chassis Mount
- Outputs: Analog Voltage Output; Analog Current Output
- Channels: 1
- User Interface: None